Package “gEDA Project” has 21 man pages.
convert_sym(1) convert_sym converts a Viewlogic symbol/schematic to gEDA gschem format. It accepts one argument, the name of the file to convert; converted output is sent to... garchive(1) garchive creates and extracts gEDA designs from an archive. The two modes of operation are "archive mode" (archive creation) and "extract mode". In archive mode... gattrib(1) gattrib is a spreadsheet-like tool for bulk editing of attributes in gEDA schematics, usually created in gschem(1). If no FILEs to open are specified on the... gmk_sym(1) gmk_sym is a program to create rectangular symbols for gschem from a file composed of comma separated lines. gnetlist(1) gnetlist is a netlist extraction and generation tool, and is part of the gEDA (GPL Electronic Design Automation) toolset. It takes one or electronic schematics... grenum(1) The grenum program will renumber the refdes definitions read from infile. gsch2pcb(1) gsch2pcb is a frontend to gnetlist(1) which aids in creating and updating pcb(1) printed circuit board layouts based on a set of electronic schematics created... gschem(1) gschem is a schematic capture application, and is part of the gEDA (GPL Electronic Design Automation) toolset. It is used to draw electronic schematics, which... gschlas(1) gschlas can embed the in-use schematic symbols and pictures into a schematic or set of schematics. It allow, for instance, putting a schematic on a website or... gsymfix(1) automatically fix common issues with gEDA symbols olib(1) olib is a simple automated converter from OrCAD v4 (in SDT version 1.10) ASCII parts library to gEDA component definition in .sym format file. It allow an... pads_backannotate(1) The pads_backannotate program reads an engineering change order (ECO) file generated by the PADS program and backannotates the requested changes to a gschem... pcb_backannotate(1) The pcb_backannotate program reads an engineering change order (ECO) file generated by the PCB program and backannotates the requested changes to a gschem... refdes_renum(1) refdes_renum reads a gschem schematic file or files and renumbers all reference designators. The reference designators are numbered starting with 1 and the old... sarlacc_schem(1) sarlacc_schem converts OrCAD schematic files (in 16-bit format) to gEDA format. sarlacc_sym(1) sarlacc_sym converts OrCAD text format libraries into gEDA components for use in the gschem(1) program. schdiff(1) The schdiff program will use ImageMagick(1) to display a graphical diff of two gschem schematic files. It's most useful when combined with a revision control... sw2asc(1) The sw2asc program reads the switcap.out output file produced by SWITCAP2 and produces a set of ASCII datafiles which can be more easily loaded into various... tragesym(1) tragesym creates gschem symbols from structured textfiles.