Package freeipmi

IPMI remote console and system management software

http://www.gnu.org/software/freeipmi/

The FreeIPMI project provides "Remote-Console" (out-of-band) and
"System Management Software" (in-band) based on Intelligent
Platform Management Interface specification.
File Formats (Section 5)
freeipmi.conf
The FreeIPMI configuration file can be used to set alternate default values to many FreeIPMI tools so values don't have to be configured on the command line...
freeipmi_interpret_sel.conf
The /etc/freeipmi//freeipmi_interpret_sel.conf defines how IPMI system event log entries should be interpreted. IPMI system events specify a number of...
freeipmi_interpret_sensor.conf
The /etc/freeipmi//freeipmi_interpret_sensor.conf defines how IPMI sensors should be interpreted. IPMI based sensors specify a number of states/thresholds when...
ipmi-config.conf
Before many IPMI tools can be used over a network, a machine's Baseboard Management Controller (BMC) must be configured. The configuration can be quite daunting...
ipmidetect.conf
Through a configuration file, system administrators may override the default values used in the ipmidetect_load_data(3) API function. The configuration file is...
libipmiconsole.conf
The Libipmiconsole configuration file can be used to set alternate default values for the Libipmiconsole library. The configuration of these defaults may be...
Miscellanea (Section 7)
freeipmi
FreeIPMI provides in-band and out-of-band IPMI software based on the IPMI v1.5/2.0 specification.
System Administration (Section 8)
bmc-device
bmc-device supports a variety of IPMI commands to perform advanced BMC functions. This tool is primarily used for development debugging, BMC error recovery...
bmc-info
Bmc-info displays BMC information, such as device version numbers, device support, and globally unique IDs (guids). Listed below are general IPMI options, tool...
ipmi-chassis
Ipmi-chassis is used for managing/monitoring an IPMI chassis, such as chassis power, indentification (i.e. LED control), and status. See OPTIONS below for all...
ipmi-config
ipmi-config is used to get and set configuration parameters in IPMI. In can be used to configured usernames, passwords, networking information, security...
ipmiconsole
ipmiconsole is a Serial-over-LAN (SOL) console utility. It can be used to establish console sessions to remote machines using the IPMI 2.0 SOL protocol...
ipmi-dcmi
Ipmi-dcmi is used to execute Data Center Manageability Interface (often referred to as DCM or DCMI) IPMI extension commands. DCMI extensions include support for...
ipmidetect
ipmidetect lists which IPMI nodes have been detected or undetected in a cluster. This information is provided by the libipmidetect(3) library and ipmidetectd(8)...
ipmi-fru
Ipmi-fru displays Field Replaceable Unit (FRU) Information. The FRU may hold a variety of information, such as device information, hardware information, serial...
ipmi-locate
Ipmi-locate probes and displays information about a BMC device, such as device addresses or IPMI version support. Ipmi-locate is sometimes used to determine if...
ipmi-oem
Ipmi-oem is used to execute OEM specific IPMI commands. It is intended to provide a better user interface for OEM specific IPMI commands rather than using...
ipmi-pet
Ipmi-pet interprets hex bytes from a platform event trap (PET) and outputs a string representing its contents. Hex values may be input on the command line, a...
ipmiping
ipmiping uses the IPMI Get Channel Authentication Capabilities request datagram to elicit an IPMI Get Channel Authentication Capabilitiesl response from a...
ipmipower
ipmipower allows users to remotely power on, off, cycle, hard reset, get a power status query, perform a pulse diagnostic interrupt, or initiate a soft-shutdown...
ipmi-raw
Ipmi-raw is used to execute IPMI commands by hex values. Hex values may be input on the command line, a file via the --file option, or via stdin if neither of...
ipmi-sel
Ipmi-sel is used to view and manage System Event Log (SEL) entries. SEL records store system event information and may be useful for debugging problems...
ipmi-sensors
Ipmi-sensors displays current readings of sensors and sensor data repository (SDR) information. The default display outputs each sensor's record id, sensor...
rmcpping
rmcpping uses the RMCP Ping request datagram to elicit an RMCP Pong response from a remote host. The utility can be used to verify if a remote host supports...