Package aoetools

ATA over Ethernet Tools

http://aoetools.sourceforge.net

The aoetools are programs that assist in using ATA over Ethernet on
systems with version 2.6 and newer Linux kernels.

System Administration (Section 8)
aoecfg
Aoecfg(8) sends AoE configuration commands that control the retrivial, conditional or unconditional setting of AoE configuration strings. Since configuration...
aoe-discover
The aoe-discover command tells the aoe driver to discover ATA over Ethernet (AoE) devices on the network. All network interfaces will be probed with a AoE...
aoe-flush
The aoe-flush command tells the aoe driver to remove devices from the system and forget about them. Normally the aoe driver will remember all devices it has...
aoe-interfaces
The aoe-interfaces command tells the aoe driver to ignore ATA over Ethernet (AoE) traffic on all but the specified network interfaces. It is analogous to the...
aoe-mkdevs
The aoe-mkdevs command is deprecated in favor of udev. Systems with udev do not need to use the aoe-mkdevs or aoe-mkself commands, because udev will create...
aoe-mkshelf
The aoe-mkshelf command is not needed on systems that have udev installed and is incompatible with aoe drivers that have the aoe_dyndevs module parameter set to...
aoeping
The aoeping(8) program performs simple one or two-round-trip communication with an ATA over Ethernet (AoE) device. It creates and receives AoE packets directly...
aoe-revalidate
The aoe-revalidate command tells the aoe driver to revalidate the disk size of an open aoe device. Normally the aoe driver will only acknowledge changes in an...
aoe-sancheck
The aoe-sancheck command collects information about the local interfaces and probes the network for ATA over Ethernet devices, validating the paths for each...
aoe-stat
The aoe-stat script collects information on ATA over Ethernet devices from sysfs. For each AoE device the kernel has discovered, there is one row in the...
aoe-version
The aoe-version script collects information on running and installed ATA over Ethernet software, displaying a summary.
coraid-update
The coraid-update script performs a few sanity checks before copying the local update file to the remote update AoE target on the CORAID appliance. Two...