tixForm - Man Page

Geometry manager based on attachment rules

Synopsis

tixForm option arg ?arg ...?

Description

The tixForm command is used to communicate with the tixForm Geometry Manager, a geometry manager that arranges the geometry of the children in a parent window according to attachment rules. The tixForm geometry manager is very flexible and powerful; it can be used to emulate all the existing features of the Tk packer and placer geometry managers (see pack(n), place(n)). The tixForm command can have any of several forms, depending on the option argument:

tixForm slave ?options?

If the first argument to tixForm is a window name (any value starting with “.”), then the command is processed in the same way as tixForm configure.

tixForm check master

This command checks whether there is circular dependency in the attachments of the master's slaves (see the section Circular Dependency below). It returns the Boolean value TRUE if it discover circular dependency and FALSE otherwise.

tixForm configure slave ?-option value ...?

Sets or adjusts the attachment values of the slave window according to the -option value argument pairs.

-b attachment

Abbreviation for the -bottom option.

-bottom attachment

Specifies an attachment for the bottom edge of the slave window. The attachment must specied according to the section Specifying Attachments below.

-bottomspring weight

Specifies the weight of the spring at the bottom edge of the slave window. See the section Using Springs below.

-bp value

Abbreviation for the -padbottom option.

-bs weight

Abbreviation for the -bottomspring option.

-fill master

Specifies the fillings when springs are used for this widget. The value must be x, y, both or none.

-in master

Places the slave window into the specified master window. If the slave was originally in another master window, all attachment values with respect to the original master window are discarded. Even if the attachment values are the same as in the original master window, they need to be specified again.  The -in flag, when needed, must appear as the first flag after the name of the slave. Otherwise an error is generated.

-l attachment

Abbreviation for the -left option.

-left attachment

Specifies an attachment for the left edge of the slave window. The attachment must specied according to the section Specifying Attachments below.

-leftspring weight

Specifies the weight of the spring at the left edge of the slave window. See the section Using Springs below.

-lp value

Abbreviation for the -padleft option.

-ls weight

Abbreviation for the -leftspring option.

-padbottom value

Specifies the amount of external padding to leave on the bottom side of the slave. The value may have any of the forms acceptable to Tk_GetPixels(3).

-padleft value

Specifies the amount of external padding to leave on the left side of the slave.

-padright value

Specifies the amount of external padding to leave on the right side of the slave.

-padtop value

Specifies the amount of external padding to leave on the top side of the slave.

-padx value

Specifies the amount of external padding to leave on both the left and the right sides of the slave.

-pady value

Specifies the amount of external padding to leave on both the top and the bottom sides of the slave.

-r attachment

Abbreviation for the -right option.

-right attachment

Specifies an attachment for the right edge of the slave window. The attachment must specied according to the section Specifying Attachments below.

-rightspring weight

Specifies the weight of the spring at the right edge of the slave window. See the section Using Springs below.

-rp value

Abbreviation for the -padright option.

-rs weight

Abbreviation for the -rightspring option.

-t attachment

Abbreviation for the -top option.

-top attachment

Specifies an attachment for the top edge of the slave window. The attachment must specied according to the section Specifying Attachments below.

-topspring weight

Specifies the weight of the spring at the top edge of the slave window. See the section Using Springs below.

-tp value

Abbreviation for the -padtop option.

-ts weight

Abbreviation for the -topspring option.

tixForm forget slave ?slave ...?

Removes each of the slaves from its master and unmaps their windows. The slaves will no longer be managed by tixForm. All attachment values with respect to their master windows are discarded. If another slave is attached to this slave, then the attachment of the other slave will be changed to grid attachment based on its geometry.

tixForm grid master ?x_size y_size?

When x_size and y_size are given, this command returns the number of grids of the master window in a pair of integers of the form {x_size y_size}. When both x_size and y_size are given, this command changes the number of horizontal and vertical grids on the master window.

tixForm info slave ?option?

Queries the attachment options of a slave window. option can be any of the options accepted by the tixForm configure command. If option is given, only the value of that option is returned. Otherwise, this command returns a list whose elements are the current configuration state of the slave given in the same option-value form that might be specified to tixForm configure. The first two elements in this list list are "-in master" where master is the slave's master window.

tixForm slaves master

Returns a list of all of the slaves for the master window. The order of the slaves in the list is the same as their order in the packing order. If master has no slaves then an empty string is returned.

Specifying Attachments

One can specify an attachment for each side of a slave window managed by tixForm. An attachment is specified in the the form "-side {anchor_point offset}". -side can be one of -top, -bottom, -left or -right.

Offset is given in screen units (i.e. any of the forms acceptable to Tk_GetPixels).  A positive offset indicates shifting to a position to the right or bottom of an anchor point. A negative offset indicates shifting to a position to the left or top of an anchor point.

Anchor_point can be given in one of the following forms:

Grid Attachment

The master window is divided into a number of horizontal and vertical grids. By default the master window is divided into 100x100 grids; the number of grids can be adjusted by the tixForm grid command. A grid attachment anchor point is given by a % sign followed by an integer value. For example, %0 spceifies the first grid line (the top or left edge of the master window). %100 spceifies the last grid line (the bottom or right edge of the master window).

Opposite Side Attachment

Opposite attachment specifies an anchor point located on the opposite side of another slave widget, which must be managed by tixForm in the same master window. An opposite attachment anchor point is given by the name of another widget. For example, "tixForm .b -top {.a 0}" attaches the top side of the widget .b to the bottom of the widget .a.

Parallel Side Attachment

Opposite attachment specifies an anchor point located on the same side of another slave widget, which must be managed by tixForm in the same master window. An parallel attachment anchor point is given by the sign & follwed by the name of another widget. For example, "tixForm .b -top {&.a 0}" attaches the top side of the widget .b to the top of the widget .a, making the top sides of these two widgets at the same vertical position in their parent window.

No Attachment

Specifies a side of the slave to be attached to nothing, indicated by the keyword none. When the none anchor point is given, the offser must be zero.

When a side of a slave is attached to {none 0}, the position of this side is calculated by the position of the other side and the natural size of the slave. For example, if a the left side of a widget is attached to {%0 100}, its right side attached to {none 0}, and the natural size of the widget is 50 pixels, the right side of the widget will be positioned at pixel {%0 149}.

When both -top and -bottom are attached to none, then by default -top will be attached to {%0 0}. When both -left and -right are attached to none, then by default -left will be attached to {%0 0}.

Shifting effects can be achieved by specifying a non-zero offset with an anchor point. In the following example, the top side of widget .b is attached to the bottom of .a; hence .b  always appears below .a.  Also, the left edge of .b is attached to the left side of .a with a 10 pixel offest.  Therefore, the left edge of .b is always shifted 10 pixels to the right of .a's left edge:

tixForm .b -left {.a 10} -top {.a 0}

ABBREVIATIONS: Certain abbreviations can be made on the attachment specifications: First an offset of zero can be omitted. Thus, the following two lines are equivalent:

tixForm .b -top {.a 0} -right {%100 0} tixForm .b -top {.a}   -right {%100}

Also, because of the way TCL handles lists, when you omit the offset, you can also leave out the braces. So you can further simplify the above to:

tixForm .b -top .a -right %100

In the second case, when the anchor point is omitted, the offset must be given. A default anchor point is chosen according to the value of the offset. If the anchor point is 0 or positive, the default anchor point %0 is used; thus, "tixForm .b -top 15" attaches the top edge of .b to a position 15 pixels below the top edge of the master window. If the anchor point is "-0" or negative, the default anchor point %100 is used; thus, "tixForm .a -right -2" attaches the right edge of .a to a position 2 pixels to the left of the master window's right edge.  An further example below shows a command with its equivalent abbreviation. tixForm .b -top {%0 10} -bottom {%100 0} tixForm .b -top 10      -bottom -0

Using Springs

To be written.

Algorithm of Tixform

TixForm starts with any slave in the list of slaves of the master window. Then it tries to determine the position of each side of the slave.

If the attachment of a side of the slave is grid attachment, the position of the side is readily determined.

If the attachment of this side is none, then tixForm tries to determine the position of the opposite side first, and then use the position of the opposite side and the natural size of the slave to determine the position of this side.

If the attachment is opposite or parallel widget attachments, then tixForm tries to determine the positions of the other widget first, and then use the positions of the other widget and the natural size of the slave determine the position of this side. This recursive algorithmis carried on until the positions of all slaves are determined.

Circular Dependency

The algorithm of tixForm will fail if a circular dependency exists in the attachments of the slaves. For example:

tixForm .c -left .b tixForm .b -right .c

In this example, the position of the left side of .b depends on the right side of .c, which in turn depends on the left side of .b.

When a circular dependency is discovered during the execution of the tixForm algorithm, tixForm will generate a background error and the geometry of the slaves are undefined (and will be arbitrary). Notice that tixForm only executes the algorithm when the specification of the slaves' attachments is complete.  Therefore, it allows intermediate states of circular dependency during the specification of the slaves' attachments.  Also, unlike the Motif Form manager widget, tixForm defines circular dependency as "dependency in the same dimension". Therefore, the following code fragment will does not have circular dependency because the two widgets do not depend on each other in the same dimension (.b depends .c in the horizontal dimension and .c depends on .b in the vertical dimension):

tixForm .b -left .c tixForm .c -top .b

Bugs

Springs have not been fully implemented yet.

Keywords

Tix(n), Form, Geometry Management

Info

4.0 Tix Built-In Commands