victronups - Man Page

victronups -h

victronups -a UPS_NAME [OPTIONS]

The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.

The Match Lite line may only report a handful of variables. This is usually not a bug - they just don’t support anything else.

If your Victron cable is broken or missing, use this diagram to build a clone:

• https://github.com/networkupstools/nut/blob/master/docs/cables/ge-imv-victron.txt
• docs/cables/ge-imv-victron.txt

This driver supports the following optional setting in the ups.conf(5):

modelname=name

Set model name

usd=delay

Set delay before shutdown on UPS

The protocol for this UPS is not officially documented.

• Radek Benedikt <benedikt@lphard.cz>
• Daniel Prynych <Daniel.Prynych@hornet.cz>

nutupsdrv(8), upsd(8).