rhino - Man Page
Driver for Brazilian Microsol RHINO UPS equipment
Synopsis
rhino -h
rhino -a UPS_NAME [OPTIONS]
Note
This man page only documents the hardware-specific features of the rhino driver. For information about the core driver, see nutupsdrv(8).
Supported Hardware
This driver has been tested with:
- Rhino 6000 VA
- Rhino 7500 VA
- Rhino 10000 VA
- Rhino 20000 VA
All Rhino models are sinusoidal on-line.
Extra Arguments
This driver support the following extra optional settings in ups.conf(5):
battext = n - (default = 0, no extra battery, where n = Ampere*hour )
Commands
- load.on - Turn on the load immediately
- load.off - Turn off the load immediately
- bypass.start - Put the UPS in bypass mode
- bypass.stop - Put the UPS out of bypass mode
- shutdown.stayoff - Shut down in 3 minutes and do not return
Author
Silvino B. Magalhães <sbm2yk@gmail.com>
See Also
The core driver
Internet resources
The NUT (Network UPS Tools) home page: https://www.networkupstools.org/
Referenced By
04/02/2024 Network UPS Tools 2.8.2 NUT Manual