nutdrv_rhino - Man Page
Driver for Brazilian Microsol RHINO UPS equipment
Synopsis
rhino -h
rhino -a UPS_NAME [OPTIONS]
Note
This man page only documents the hardware-specific features of the rhino driver. For information about the core driver, see nutupsdrv(8).
Supported Hardware
This driver has been tested with:
- Rhino 6000 VA
- Rhino 7500 VA
- Rhino 10000 VA
- Rhino 20000 VA
All Rhino models are sinusoidal on-line.
Extra Arguments
This driver support the following extra optional settings in ups.conf(5):
- battext=n
Default = 0, no extra battery, where n = Ampere*hour.
Commands
- load.on
Turn on the load immediately.
- load.off
Turn off the load immediately.
- bypass.start
Put the UPS in bypass mode.
- bypass.stop
Put the UPS out of bypass mode.
- shutdown.stayoff
Shut down in 3 minutes and do not return.
Author
Silvino B. Magalhães <sbm2yk@gmail.com>
See Also
The core driver
Internet resources
The NUT (Network UPS Tools) home page: https://www.networkupstools.org/historic/v2.8.3/
Info
04/22/2025 Network UPS Tools 2.8.3 NUT Manual