masterguard - Man Page

Driver for Masterguard UPS equipment

Synopsis

masterguard -h

masterguard -a UPS_NAME [OPTIONS]

Note

This man page only documents the hardware-specific features of the masterguard driver. For information about the core driver, see nutupsdrv(8).

Note

Please note that this driver is deprecated and will not receive new development. If it works for managing your devices ā€” fine, but if you are running it to try setting up a new device, please consider the newer nutdrv_qx(8) instead, which should handle all Q* protocol variants for NUT.

Please do also report if your device works with this driver, but nutdrv_qx(8) would not actually support it with any subdriver!

Supported Hardware

This driver supports Masterguard UPS equipment (serial connection only).

Extra Arguments

CS

Cancel the shutdown procedure.

Author

Michael Spanier <mail@michael-spanier.de>

See Also

Newer driver

nutdrv_qx(8)

The core driver

nutupsdrv(8)

Internet resources

The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

Referenced By

nutupsdrv(8), upsd(8).

07/03/2024 Network UPS Tools 2.8.2. NUT Manual