iekanalyzer man page

ipmiutil_ekanalyzer — run FRU-Ekeying analyzer with FRU files

Synopsis

ipmiutil ekanalyzer [-mx -NPRUEFJTVY] commands (deprecated, see ifru instead)

Description

ipmiutil ekanalyzer is a program that analyzes FRU Ekeying information from files saved from PICMG IPMI systems.

ekanalyzer command xx=filename1 xx=filename2 [rc=filename3]
NOTE: This command can support a maximum of 8 files per command line

filename1

binary file that stores FRU data of a Carrier or an AMC module

filename2

binary file that stores FRU data of an AMC module. These binary files can be generated from this command:
    ipmiutil fru -i id -d filename

filename3

configuration file used for configuring On-Carrier Device ID or OEM GUID. This file is optional.

xx

indicates the type of the file. It can take the following value:
    oc : On-Carrier device
    a1 : AMC slot A1
    a2 : AMC slot A2
    a3 : AMC slot A3
    a4 : AMC slot A4
    b1 : AMC slot B1
    b2 : AMC slot B2
    b3 : AMC slot B3
    b4 : AMC slot B4
    sm : Shelf Manager

Options

-m 002000

Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). This could be used for PICMG or ATCA blade systems. The trailing character, if present, indicates SMI addressing if 's', or IPMB addressing if 'i' or not present.

-x

Causes extra debug messages to be displayed.

-N nodename

Nodename or IP address of the remote target system.  If a nodename is specified, IPMI LAN interface is used.  Otherwise the local system management interface is used.

-P/-R rmt_pswd

Remote password for the nodename given.  The default is a null password.

-U rmt_user

Remote username for the nodename given.  The default is a null username.

-E

Use the remote password from Environment variable IPMI_PASSWORD.

-F drv_t

Force the driver type to one of the followng: imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. Note that lan2i means lan2 with intelplus. The default is to detect any available driver type and use it.

-J

Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, 1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, 5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. Default is 3.

-T

Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.

-V

Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.

-Y

Yes, do prompt the user for the IPMI LAN remote password. Alternatives for the password are -E or -P.

Commands

The available commands for ekanalyzer are:

print [carrier | power | all]
carrier (default) oc=filename1 oc=filename2 ...

Display point to point physical connectivity between carriers and AMC modules.
Example:
  # ipmiutil ekanalyzer print carrier oc=fru oc=carrierfru
  From Carrier file: fru
     Number of AMC bays supported by Carrier: 2
     AMC slot B1 topology:
        Port 0 =====> On Carrier Device ID 0, Port 16
        Port 1 =====> On Carrier Device ID 0, Port 12
        Port 2 =====> AMC slot B2, Port 2
     AMC slot B2 topology:
        Port 0 =====> On Carrier Device ID 0, Port 3
        Port 2 =====> AMC slot B1, Port 2
  *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
  From Carrier file: carrierfru
     On Carrier Device ID 0 topology:
        Port 0 =====> AMC slot B1, Port 4
        Port 1 =====> AMC slot B1, Port 5
        Port 2 =====> AMC slot B2, Port 6
        Port 3 =====> AMC slot B2, Port 7
     AMC slot B1 topology:
        Port 0 =====> AMC slot B2, Port 0
     AMC slot B1 topology:
        Port 1 =====> AMC slot B2, Port 1
     Number of AMC bays supported by Carrier: 2

power xx=filename1 xx=filename2 ...

Display power supply information between carrier and AMC modules.

all xx=filename xx=filename ...

Display both physical connectivity and power supply of each carrier and AMC modules.

frushow xx=filename

Convert a binary FRU file into human readable text format. Use -v option to get more display information.

summary [match | unmatch | all]
match (default) xx=filename xx=filename ...

Display only matched results of Ekeying match between an On-Carrier device and an AMC module or between 2 AMC modules. Example:
# ipmiutil ekanalyzer summary match oc=fru b1=amcB1 a2=amcA2
On-Carrier Device vs AMC slot B1
 AMC slot B1 port 0 ==> On-Carrier Device 0 port 16
  Matching Result
  From On-Carrier Device ID 0
    Channel ID 11 || Lane 0: enable
    Link Type: AMC.2 Ethernet
    Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
    Link Group ID: 0 || Link Asym. Match: exact match
  To AMC slot B1
    Channel ID 0 || Lane 0: enable
    Link Type: AMC.2 Ethernet
    Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
    Link Group ID: 0 || Link Asym. Match: exact match
  *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
 AMC slot B1 port 1 ==> On-Carrier Device 0 port 12
  Matching Result
  From On-Carrier Device ID 0
    Channel ID 6 || Lane 0: enable
    Link Type: AMC.2 Ethernet
    Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
    Link Group ID: 0 || Link Asym. Match: exact match
  To AMC slot B1
    Channel ID 1 || Lane 0: enable
    Link Type: AMC.2 Ethernet
    Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
    Link Group ID: 0 || Link Asym. Match: exact match
  *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
On-Carrier Device vs AMC slot A2
 AMC slot A2 port 0 ==> On-Carrier Device 0 port 3
  Matching Result
  From On-Carrier Device ID 0
    Channel ID 9 || Lane 0: enable
    Link Type: AMC.2 Ethernet
    Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
    Link Group ID: 0 || Link Asym. Match: exact match
  To AMC slot A2
    Channel ID 0 || Lane 0: enable
    Link Type: AMC.2 Ethernet
    Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
    Link Group ID: 0 || Link Asym. Match: exact match
  *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
AMC slot B1 vs AMC slot A2
 AMC slot A2 port 2 ==> AMC slot B1 port 2
  Matching Result
  From AMC slot B1
    Channel ID 2 || Lane 0: enable
    Link Type: AMC.3 Storage
    Link Type extension: Serial Attached SCSI (SAS/SATA)
    Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
  To AMC slot A2
    Channel ID 2 || Lane 0: enable
    Link Type: AMC.3 Storage
    Link Type extension: Serial Attached SCSI (SAS/SATA)
    Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

unmatch xx=filename xx=filename ...

Display the unmatched results of Ekeying match between an On-Carrier device and an AMC module or between 2 AMC modules

all xx=filename xx=filename ...

Display both matched result and unmatched results of Ekeying match between two cards or two modules.

See Also

ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifirewall(8)  ifru(8) ifruset(8) ifwum(8) igetevent(8) ihealth(8) ihpm(8) ilan(8) ipicmg(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) isunoem(8) iwdt(8) ipmiutil(8) ipmi_port(8)

Warnings

See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.

Author

Andy Cress <arcress at users.sourceforge.net>

Info

Version 1.0: 09 Sep 2010