gpg_web_selinux man page

gpg_web_selinux — Security Enhanced Linux Policy for the gpg_web processes

Description

Security-Enhanced Linux secures the gpg_web processes via flexible mandatory access control.

The gpg_web processes execute with the gpg_web_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep gpg_web_t

Entrypoints

The gpg_web_t SELinux type can be entered via the gpg_exec_t file type.

The default entrypoint paths for the gpg_web_t domain are the following:

/usr/bin/gpg(2)?, /usr/lib/gnupg/.*, /usr/bin/gpgsm

Process Types

SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to psbP

Policy governs the access confined processes have to files. SELinux gpg_web policy is very flexible allowing users to setup their gpg_web processes in as secure a method as possible.

The following process types are defined for gpg_web:

gpg_web_t

Note: semanage permissive -a gpg_web_t can be used to make the process type gpg_web_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

Booleans

SELinux policy is customizable based on least access required. gpg_web policy is extremely flexible and has several booleans that allow you to manipulate the policy and run gpg_web with the tightest access possible.

If you want to deny any process from ptracing or debugging any other processes, you must turn on the deny_ptrace boolean. Enabled by default.

setsebool -P deny_ptrace 1

If you want to allow all domains to use other domains file descriptors, you must turn on the domain_fd_use boolean. Enabled by default.

setsebool -P domain_fd_use 1

If you want to allow all domains to have the kernel load modules, you must turn on the domain_kernel_load_modules boolean. Disabled by default.

setsebool -P domain_kernel_load_modules 1

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

If you want to enable reading of urandom for all domains, you must turn on the global_ssp boolean. Disabled by default.

setsebool -P global_ssp 1

If you want to allow httpd cgi support, you must turn on the httpd_enable_cgi boolean. Disabled by default.

setsebool -P httpd_enable_cgi 1

If you want to allow httpd to run gpg, you must turn on the httpd_use_gpg boolean. Disabled by default.

setsebool -P httpd_use_gpg 1

Managed Files

The SELinux process type gpg_web_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.

httpd_sys_rw_content_t

/etc/rt(/.*)?
/etc/glpi(/.*)?
/etc/horde(/.*)?
/etc/drupal.*
/etc/z-push(/.*)?
/var/lib/svn(/.*)?
/var/www/svn(/.*)?
/etc/owncloud(/.*)?
/var/www/html(/.*)?/uploads(/.*)?
/var/www/html(/.*)?/wp-content(/.*)?
/var/www/html(/.*)?/wp_backups(/.*)?
/var/www/html(/.*)?/sites/default/files(/.*)?
/var/www/html(/.*)?/sites/default/settings.php
/etc/mock/koji(/.*)?
/var/lib/drupal.*
/etc/zabbix/web(/.*)?
/var/lib/moodle(/.*)?
/var/log/z-push(/.*)?
/var/spool/gosa(/.*)?
/etc/WebCalendar(/.*)?
/usr/share/joomla(/.*)?
/var/lib/dokuwiki(/.*)?
/var/lib/owncloud(/.*)?
/var/spool/viewvc(/.*)?
/var/lib/pootle/po(/.*)?
/var/www/moodledata(/.*)?
/srv/gallery2/smarty(/.*)?
/var/www/moodle/data(/.*)?
/var/lib/graphite-web(/.*)?
/var/www/gallery/albums(/.*)?
/var/www/html/owncloud/data(/.*)?
/usr/share/wordpress-mu/wp-content(/.*)?
/usr/share/wordpress/wp-content/uploads(/.*)?
/usr/share/wordpress/wp-content/upgrade(/.*)?
/var/www/html/configuration.php

public_content_rw_t

/var/spool/abrt-upload(/.*)?

Sharing Files

If you want to share files with multiple domains (Apache, FTP, rsync, Samba), you can set a file context of public_content_t and public_content_rw_t. These context allow any of the above domains to read the content. If you want a particular domain to write to the public_content_rw_t domain, you must set the appropriate boolean.

Allow gpg_web servers to read the /var/gpg_web directory by adding the public_content_t file type to the directory and by restoring the file type.

semanage fcontext -a -t public_content_t "/var/gpg_web(/.*)?"
restorecon -F -R -v /var/gpg_web

Allow gpg_web servers to read and write /var/gpg_web/incoming by adding the public_content_rw_t type to the directory and by restoring the file type. You also need to turn on the gpg_web_anon_write boolean.

semanage fcontext -a -t public_content_rw_t "/var/gpg_web/incoming(/.*)?"
restorecon -F -R -v /var/gpg_web/incoming
setsebool -P gpg_web_anon_write 1

If you want to allow gpg web domain to modify public files used for public file transfer services., you must turn on the gpg_web_anon_write boolean.

setsebool -P gpg_web_anon_write 1

Commands

semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove policy modules.

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux policy settings.

Author

This manual page was auto-generated using sepolicy manpage .

See Also

selinux(8), gpg_web(8), semanage(8), restorecon(8), chcon(1), sepolicy(8) , setsebool(8)

Referenced By

gpg_selinux(8).

16-12-07 gpg_web SELinux Policy gpg_web