fence_pve - Man Page

The fence_pve agent can be used to fence virtual machines acting as nodes in a virtualized cluster.

fence_pve accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_pve can be run by itself with command line options.  This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.proxmox.com/

-o,  --action=[action]

Fencing action (Default Value: reboot)

-a,  --ip=[ip]

IP Address or Hostname of a node within the Proxmox cluster. This parameter is always required.

-u,  --ipport=[port]

TCP/UDP port to use for connection with device (Default Value: 8006)

-m,  --method=[method]

Method to fence (onoff|cycle) (Default Value: onoff)

-p,  --password=[password]

Login password or passphrase

-S,  --password-script=[script]

Script to run to retrieve password

-n,  --plug=[id]

Id of the virtual machine. This parameter is always required.

-z,  --ssl

Use SSL connection with verifying certificate (Default Value: 1)

--ssl-insecure

Use SSL connection without verifying certificate

--ssl-secure

Use SSL connection with verifying certificate

-l,  --username=[name]

Login name (Default Value: root@pam)

-N,  --pve-node=[node_name]

Proxmox node name on which machine is located. (Must be specified if not using --pve-node-auto)

-A,  --pve-node-auto

Automatically select proxmox node. (This option overrides --pve-node)

--vmtype

Virtual machine type lxc or qemu. (Default: qemu) (Default Value: qemu)

--nodename

Replaced by --pve-node

-q,  --quiet

Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

-v,  --verbose

Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.

--verbose-level

Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).

-D,  --debug-file=[debugfile]

Write debug information to given file

-V,  --version

Display version information and exit

-h,  --help

Display help and exit

--plug-separator=[char]

Separator for plug parameter when specifying more than 1 plug (Default Value: ,)

-C,  --separator=[char]

Separator for CSV created by 'list' operation (Default Value: ,)

--delay=[seconds]

Wait X seconds before fencing is started (Default Value: 0)

--disable-timeout=[true/false]

Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

--login-timeout=[seconds]

Wait X seconds for cmd prompt after login (Default Value: 5)

--power-timeout=[seconds]

Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds]

Wait X seconds after issuing ON/OFF (Default Value: 0)

--shell-timeout=[seconds]

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--stonith-status-sleep=[seconds]

Sleep X seconds between status calls during a STONITH action (Default Value: 1)

--retry-on=[attempts]

Count of attempts to retry power on (Default Value: 1)

--gnutlscli-path=[path]

Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

on

Power on machine.

off

Power off machine.

reboot

Reboot machine.

status

This returns the status of the plug/virtual machine.

list

List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

list-status

List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.

monitor

Check the health of fence device

metadata

Display the XML metadata describing this resource.

manpage

The operational behavior of this is not known.

validate-all

Validate if all required parameters are entered.

action

Fencing action (Default Value: reboot)

ip

IP Address or Hostname of a node within the Proxmox cluster. This parameter is always required. Obsoletes: ipaddr

ipport

TCP/UDP port to use for connection with device (Default Value: 8006)

method

Method to fence (onoff|cycle) (Default Value: onoff)

password

Login password or passphrase Obsoletes: passwd

password_script

Script to run to retrieve password Obsoletes: passwd_script

plug

Id of the virtual machine. This parameter is always required. Obsoletes: port

ssl

Use SSL connection with verifying certificate (Default Value: 1)

ssl_insecure

Use SSL connection without verifying certificate

ssl_secure

Use SSL connection with verifying certificate

username

Login name (Default Value: root@pam) Obsoletes: login

pve_node

Proxmox node name on which machine is located. (Must be specified if not using --pve-node-auto)

pve_node_auto

Automatically select proxmox node. (This option overrides --pve-node)

vmtype

Virtual machine type lxc or qemu. (Default: qemu) (Default Value: qemu)

nodename

Replaced by --pve-node Obsoletes: node_name

quiet

Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

verbose

Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.

verbose_level

Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).

debug_file

Write debug information to given file Obsoletes: debug

version

Display version information and exit

help

Display help and exit

plug_separator

Separator for plug parameter when specifying more than 1 plug (Default Value: ,)

separator

Separator for CSV created by 'list' operation (Default Value: ,)

delay

Wait X seconds before fencing is started (Default Value: 0)

disable_timeout

Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

login_timeout

Wait X seconds for cmd prompt after login (Default Value: 5)

power_timeout

Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait

Wait X seconds after issuing ON/OFF (Default Value: 0)

shell_timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

stonith_status_sleep

Sleep X seconds between status calls during a STONITH action (Default Value: 1)

retry_on

Count of attempts to retry power on (Default Value: 1)

gnutlscli_path

Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)