fence_ilo4 man page

fence_ilo4 — Fence agent for IPMI

fence_ilo3 — Fence agent for HP iLO3 (symlink)

fence_ilo4 — Fence agent for HP iLO4 (symlink)

fence_imm — Fence agent for IBM Integrated Management Module (symlink)

fence_idrac — Fence agent for Dell iDRAC (symlink)

Description

fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option.

fence_ilo4 accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo4 can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL:

Parameters

-o, --action=[action]
Fencing action (Default Value: reboot)
-A, --auth=[auth]
IPMI Lan Auth type. (md5|password|none)
-C, --cipher=[cipher]
Ciphersuite to use (same as ipmitool -C parameter)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-a, --ip=[ip]
IP address or hostname of fencing device
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 623)
-P, --lanplus
Use Lanplus to improve security of connection (Default Value: 1)
-l, --username=[name]
Login name
-m, --method=[method]
Method to fence (onoff|cycle) (Default Value: onoff)
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[ip]
IP address or hostname of fencing device (together with --port-as-ip)
-L, --privlvl=[level]
Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator)
-v, --verbose
Verbose mode
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--ipmitool-path=[path]
Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--port-as-ip
Make "port/plug" to be an alias to IP address
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 2)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--use-sudo
Use sudo (without password) when calling 3rd party software
--sudo-path=[path]
Path to sudo binary (Default Value: /usr/bin/sudo)

Actions

on
Power on machine.
off
Power off machine.
reboot
Reboot machine.
status
This returns the status of the plug/virtual machine.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
validate-all
Validate if all required parameters are entered.
diag
Pulse a diagnostic interrupt to the processor(s).

Stdin Parameters

action
Fencing action (Default Value: reboot)
auth
IPMI Lan Auth type. (md5|password|none)
cipher
Ciphersuite to use (same as ipmitool -C parameter)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ipaddr
IP address or hostname of fencing device
ipport
TCP/UDP port to use for connection with device (Default Value: 623)
lanplus
Use Lanplus to improve security of connection (Default Value: 1)
login
Login name
method
Method to fence (onoff|cycle) (Default Value: onoff)
passwd
Login password or passphrase
passwd_script
Script to run to retrieve password
port
IP address or hostname of fencing device (together with --port-as-ip)
privlvl
Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator)
verbose
Verbose mode
debug
Write debug information to given file
version
Display version information and exit
help
Display help and exit
delay
Wait X seconds before fencing is started (Default Value: 0)
ipmitool_path
Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
port_as_ip
Make "port/plug" to be an alias to IP address
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 2)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
retry_on
Count of attempts to retry power on (Default Value: 1)
sudo
Use sudo (without password) when calling 3rd party software
sudo_path
Path to sudo binary (Default Value: /usr/bin/sudo)

Info

2009-10-20 fence_ilo4 (Fence Agent)