fence_heuristics_ping - Man Page

Fence agent for ping-heuristic based fencing

Description

fence_heuristics_ping uses ping-heuristics to control execution of another fence agent on the same fencing level.

This is not a fence agent by itself! Its only purpose is to enable/disable another fence agent that lives on the same fencing level but after fence_heuristics_ping.

fence_heuristics_ping accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_heuristics_ping can be run by itself with command line options.  This is useful for testing and for turning outlets on or off from scripts.

Vendor URL:

Parameters

-o,  --action=[action]

Fencing action (Default Value: reboot)

-m,  --method=[method]

Method to fence (onoff|cycle) (Default Value: cycle)

--ping-count=[number]

The number of ping-probes that is being sent per target (Default Value: 10)

--ping-good-count=[number]

The number of positive ping-probes required to account a target as available (Default Value: 8)

--ping-interval=[seconds]

The interval in seconds between ping-probes (Default Value: 1)

--ping-maxfail=[number]

The number of failed ping-targets to still account as overall success (Default Value: 0)

--ping-targets=tgt1,[inet6:]tgt2

A comma separated list of ping-targets (optionally prepended by 'inet:' or 'inet6:') to be probed (Default Value: )

--ping-timeout=[seconds]

The timeout in seconds till an individual ping-probe is accounted as lost (Default Value: 2)

-q,  --quiet

Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

-v,  --verbose

Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.

--verbose-level

Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).

-D,  --debug-file=[debugfile]

Write debug information to given file

-V,  --version

Display version information and exit

-h,  --help

Display help and exit

--plug-separator=[char]

Separator for plug parameter when specifying more than 1 plug (Default Value: ,)

--delay=[seconds]

Wait X seconds before fencing is started (Default Value: 0)

--disable-timeout=[true/false]

Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

--login-timeout=[seconds]

Wait X seconds for cmd prompt after login (Default Value: 5)

--power-timeout=[seconds]

Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds]

Wait X seconds after issuing ON/OFF (Default Value: 0)

--shell-timeout=[seconds]

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--stonith-status-sleep=[seconds]

Sleep X seconds between status calls during a STONITH action (Default Value: 1)

--retry-on=[attempts]

Count of attempts to retry power on (Default Value: 1)

Actions

on

Power on machine.

off

Power off machine.

reboot

Reboot machine.

monitor

Check the health of fence device

metadata

Display the XML metadata describing this resource.

manpage

The operational behavior of this is not known.

validate-all

Validate if all required parameters are entered.

Stdin Parameters

action

Fencing action (Default Value: reboot)

method

Method to fence (onoff|cycle) (Default Value: cycle)

ping_count

The number of ping-probes that is being sent per target (Default Value: 10)

ping_good_count

The number of positive ping-probes required to account a target as available (Default Value: 8)

ping_interval

The interval in seconds between ping-probes (Default Value: 1)

ping_maxfail

The number of failed ping-targets to still account as overall success (Default Value: 0)

ping_targets

A comma separated list of ping-targets (optionally prepended by 'inet:' or 'inet6:') to be probed (Default Value: )

ping_timeout

The timeout in seconds till an individual ping-probe is accounted as lost (Default Value: 2)

quiet

Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

verbose

Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.

verbose_level

Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).

debug_file

Write debug information to given file Obsoletes: debug

version

Display version information and exit

help

Display help and exit

plug_separator

Separator for plug parameter when specifying more than 1 plug (Default Value: ,)

delay

Wait X seconds before fencing is started (Default Value: 0)

disable_timeout

Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

login_timeout

Wait X seconds for cmd prompt after login (Default Value: 5)

power_timeout

Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait

Wait X seconds after issuing ON/OFF (Default Value: 0)

shell_timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

stonith_status_sleep

Sleep X seconds between status calls during a STONITH action (Default Value: 1)

retry_on

Count of attempts to retry power on (Default Value: 1)

Info

2009-10-20 fence_heuristics_ping (Fence Agent)