fence_cisco_ucs man page

fence_cisco_ucs — Fence agent for Cisco UCS

Description

fence_cisco_ucs is an I/O Fencing agent which can be used with Cisco UCS to fence machines.

fence_cisco_ucs accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_cisco_ucs can be run by itself with command line options.  This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.cisco.com

Parameters

-o, --action=[action]

Fencing action (Default Value: reboot)

-4, --inet4-only

Forces agent to use IPv4 addresses only

-6, --inet6-only

Forces agent to use IPv6 addresses only

-a, --ip=[ip]

IP address or hostname of fencing device This parameter is always required.

-u, --ipport=[port]

TCP/UDP port to use for connection with device (Default Value: 80)

-t, --notls

Disable TLS negotiation and force SSL3.0. This should only be used for devices that do not support TLS1.0 and up.

-p, --password=[password]

Login password or passphrase

-S, --password-script=[script]

Script to run to retrieve password

-n, --plug=[id]

Physical plug number on device, UUID or identification of machine This parameter is always required.

-z, --ssl

Use SSL connection with verifying certificate

--ssl-insecure

Use SSL connection without verifying certificate

--ssl-secure

Use SSL connection with verifying certificate

--suborg=[path]

Additional path needed to access suborganization (Default Value: )

-l, --username=[name]

Login name This parameter is always required.

-q, --quiet

Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

-v, --verbose

Verbose mode

-D, --debug-file=[debugfile]

Write debug information to given file

-V, --version

Display version information and exit

-h, --help

Display help and exit

-C, --separator=[char]

Separator for CSV created by 'list' operation (Default Value: ,)

--delay=[seconds]

Wait X seconds before fencing is started (Default Value: 0)

--login-timeout=[seconds]

Wait X seconds for cmd prompt after login (Default Value: 5)

--missing-as-off

Missing port returns OFF instead of failure

--power-timeout=[seconds]

Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds]

Wait X seconds after issuing ON/OFF (Default Value: 0)

--shell-timeout=[seconds]

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--retry-on=[attempts]

Count of attempts to retry power on (Default Value: 1)

--gnutlscli-path=[path]

Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

Actions

on

Power on machine.

off

Power off machine.

reboot

Reboot machine.

status

This returns the status of the plug/virtual machine.

list

List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

list-status

List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.

monitor

Check the health of fence device

metadata

Display the XML metadata describing this resource.

manpage

The operational behavior of this is not known.

validate-all

Validate if all required parameters are entered.

Stdin Parameters

action

Fencing action (Default Value: reboot)

inet4_only

Forces agent to use IPv4 addresses only

inet6_only

Forces agent to use IPv6 addresses only

ip

IP address or hostname of fencing device This parameter is always required. Obsoletes: ipaddr

ipport

TCP/UDP port to use for connection with device (Default Value: 80)

notls

Disable TLS negotiation and force SSL3.0. This should only be used for devices that do not support TLS1.0 and up.

password

Login password or passphrase Obsoletes: passwd

password_script

Script to run to retrieve password Obsoletes: passwd_script

plug

Physical plug number on device, UUID or identification of machine This parameter is always required. Obsoletes: port

ssl

Use SSL connection with verifying certificate

ssl_insecure

Use SSL connection without verifying certificate

ssl_secure

Use SSL connection with verifying certificate

suborg

Additional path needed to access suborganization (Default Value: )

username

Login name This parameter is always required. Obsoletes: login

quiet

Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

verbose

Verbose mode

debug_file

Write debug information to given file Obsoletes: debug

version

Display version information and exit

help

Display help and exit

separator

Separator for CSV created by 'list' operation (Default Value: ,)

delay

Wait X seconds before fencing is started (Default Value: 0)

login_timeout

Wait X seconds for cmd prompt after login (Default Value: 5)

missing_as_off

Missing port returns OFF instead of failure

power_timeout

Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait

Wait X seconds after issuing ON/OFF (Default Value: 0)

shell_timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

retry_on

Count of attempts to retry power on (Default Value: 1)

gnutlscli_path

Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

Info

2009-10-20 fence_cisco_ucs (Fence Agent)