dhcpd_selinux - Man Page

Security Enhanced Linux Policy for the dhcpd processes

Description

Security-Enhanced Linux secures the dhcpd processes via flexible mandatory access control.

The dhcpd processes execute with the dhcpd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep dhcpd_t

Entrypoints

The dhcpd_t SELinux type can be entered via the dhcpd_exec_t file type.

The default entrypoint paths for the dhcpd_t domain are the following:

/usr/sbin/dhcpd(6)?, /usr/sbin/dhcrelay(6)?

Process Types

SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to psbP

Policy governs the access confined processes have to files. SELinux dhcpd policy is very flexible allowing users to setup their dhcpd processes in as secure a method as possible.

The following process types are defined for dhcpd:

dhcpd_t

Note: semanage permissive -a dhcpd_t can be used to make the process type dhcpd_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

Booleans

SELinux policy is customizable based on least access required.  dhcpd policy is extremely flexible and has several booleans that allow you to manipulate the policy and run dhcpd with the tightest access possible.

If you want to determine whether DHCP daemon can use LDAP backends, you must turn on the dhcpd_use_ldap boolean. Disabled by default.

setsebool -P dhcpd_use_ldap 1

If you want to dontaudit all daemons scheduling requests (setsched, sys_nice), you must turn on the daemons_dontaudit_scheduling boolean. Enabled by default.

setsebool -P daemons_dontaudit_scheduling 1

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

If you want to allow system to run with NIS, you must turn on the nis_enabled boolean. Disabled by default.

setsebool -P nis_enabled 1

Port Types

SELinux defines port types to represent TCP and UDP ports.

You can see the types associated with a port by using the following command:

semanage port -l

Policy governs the access confined processes have to these ports. SELinux dhcpd policy is very flexible allowing users to setup their dhcpd processes in as secure a method as possible.

The following port types are defined for dhcpd:

    dhcpd_port_t

Default Defined Ports: tcp 547,548,647,847,7911 udp 67,547,548,647,847

Managed Files

The SELinux process type dhcpd_t can manage files labeled with the following file types.  The paths listed are the default paths for these file types.  Note the processes UID still need to have DAC permissions.

cluster_conf_t

/etc/cluster(/.*)?

cluster_var_lib_t

/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?

cluster_var_run_t

/run/crm(/.*)?
/run/cman_.*
/run/rsctmp(/.*)?
/run/aisexec.*
/run/heartbeat(/.*)?
/run/pcsd-ruby.socket
/run/corosync-qnetd(/.*)?
/run/corosync-qdevice(/.*)?
/run/pcsd.socket
/run/corosync.pid
/run/cpglockd.pid
/run/rgmanager.pid
/run/cluster/rgmanager.sk

dhcpd_state_t

/var/lib/dhcp(3)?/dhcpd.leases.*
/var/lib/dhcpd(/.*)?

dhcpd_tmp_t

dhcpd_var_run_t

/run/dhcpd(6)?.pid

krb5_host_rcache_t

/var/tmp/krb5_0.rcache2
/var/cache/krb5rcache(/.*)?
/var/tmp/nfs_0
/var/tmp/DNS_25
/var/tmp/host_0
/var/tmp/imap_0
/var/tmp/HTTP_23
/var/tmp/HTTP_48
/var/tmp/ldap_55
/var/tmp/ldap_487
/var/tmp/ldapmap1_0

root_t

/sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd

File Contexts

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to lsbP

Policy governs the access confined processes have to these files. SELinux dhcpd policy is very flexible allowing users to setup their dhcpd processes in as secure a method as possible.

STANDARD FILE CONTEXT

SELinux defines the file context types for the dhcpd, if you wanted to store files with these types in a different paths, you need to execute the semanage command to specify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t dhcpd_exec_t '/srv/dhcpd/content(/.*)?'
restorecon -R -v /srv/mydhcpd_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for dhcpd:

dhcpd_exec_t

- Set files with the dhcpd_exec_t type, if you want to transition an executable to the dhcpd_t domain.

Paths:

/usr/sbin/dhcpd(6)?, /usr/sbin/dhcrelay(6)?

dhcpd_initrc_exec_t

- Set files with the dhcpd_initrc_exec_t type, if you want to transition an executable to the dhcpd_initrc_t domain.

Paths:

/etc/rc.d/init.d/dhcpd(6)?, /etc/rc.d/init.d/dhcrelay(6)?

dhcpd_state_t

- Set files with the dhcpd_state_t type, if you want to treat the files as dhcpd state data.

Paths:

/var/lib/dhcp(3)?/dhcpd.leases.*, /var/lib/dhcpd(/.*)?

dhcpd_tmp_t

- Set files with the dhcpd_tmp_t type, if you want to store dhcpd temporary files in the /tmp directories.

dhcpd_unit_file_t

- Set files with the dhcpd_unit_file_t type, if you want to treat the files as dhcpd unit content.

Paths:

/usr/lib/systemd/system/dhcpd.*, /usr/lib/systemd/system/dhcpcd.*, /usr/lib/systemd/system/dhcpd6.*, /usr/lib/systemd/system/dhcrelay.*

dhcpd_var_run_t

- Set files with the dhcpd_var_run_t type, if you want to store the dhcpd files under the /run or /var/run directory.

Note: File context can be temporarily modified with the chcon command.  If you want to permanently change the file context you need to use the semanage fcontext command.  This will modify the SELinux labeling database.  You will need to use restorecon to apply the labels.

Commands

semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove policy modules.

semanage port can also be used to manipulate the port definitions

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux policy settings.

Author

This manual page was auto-generated using sepolicy manpage .

See Also

selinux(8), dhcpd(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8)

Info

24-03-15 SELinux Policy dhcpd