conntrackd_selinux man page

conntrackd_selinux — Security Enhanced Linux Policy for the conntrackd processes

Description

Security-Enhanced Linux secures the conntrackd processes via flexible mandatory access control.

The conntrackd processes execute with the conntrackd_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep conntrackd_t

Entrypoints

The conntrackd_t SELinux type can be entered via the conntrackd_exec_t file type.

The default entrypoint paths for the conntrackd_t domain are the following:

/usr/sbin/conntrackd

Process Types

SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to psbP

Policy governs the access confined processes have to files. SELinux conntrackd policy is very flexible allowing users to setup their conntrackd processes in as secure a method as possible.

The following process types are defined for conntrackd:

conntrackd_t

Note: semanage permissive -a conntrackd_t can be used to make the process type conntrackd_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

Booleans

SELinux policy is customizable based on least access required.  conntrackd policy is extremely flexible and has several booleans that allow you to manipulate the policy and run conntrackd with the tightest access possible.

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

Port Types

SELinux defines port types to represent TCP and UDP ports.

You can see the types associated with a port by using the following command:

semanage port -l

Policy governs the access confined processes have to these ports. SELinux conntrackd policy is very flexible allowing users to setup their conntrackd processes in as secure a method as possible.

The following port types are defined for conntrackd:

    conntrackd_port_t

Default Defined Ports: udp 3780

Managed Files

The SELinux process type conntrackd_t can manage files labeled with the following file types.  The paths listed are the default paths for these file types.  Note the processes UID still need to have DAC permissions.

cluster_conf_t

/etc/cluster(/.*)?

cluster_var_lib_t

/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?

cluster_var_run_t

/var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/corosync-qnetd(/.*)?
/var/run/corosync-qdevice(/.*)?
/var/run/cpglockd.pid
/var/run/corosync.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk

conntrackd_log_t

/var/log/conntrackd.log

conntrackd_var_lock_t

/var/lock/conntrack.lock

conntrackd_var_run_t

/run/conntrackd.ctl

root_t

/sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd

File Contexts

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to lsbP

Policy governs the access confined processes have to these files. SELinux conntrackd policy is very flexible allowing users to setup their conntrackd processes in as secure a method as possible.

STANDARD FILE CONTEXT

SELinux defines the file context types for the conntrackd, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t conntrackd_var_lock_t '/srv/myconntrackd_content(/.*)?'
restorecon -R -v /srv/myconntrackd_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for conntrackd:

conntrackd_conf_t

- Set files with the conntrackd_conf_t type, if you want to treat the files as conntrackd configuration data, usually stored under the /etc directory.

conntrackd_exec_t

- Set files with the conntrackd_exec_t type, if you want to transition an executable to the conntrackd_t domain.

conntrackd_initrc_exec_t

- Set files with the conntrackd_initrc_exec_t type, if you want to transition an executable to the conntrackd_initrc_t domain.

conntrackd_log_t

- Set files with the conntrackd_log_t type, if you want to treat the data as conntrackd log data, usually stored under the /var/log directory.

conntrackd_unit_file_t

- Set files with the conntrackd_unit_file_t type, if you want to treat the files as conntrackd unit content.

conntrackd_var_lock_t

- Set files with the conntrackd_var_lock_t type, if you want to treat the files as conntrackd var lock data, stored under the /var/lock directory

conntrackd_var_run_t

- Set files with the conntrackd_var_run_t type, if you want to store the conntrackd files under the /run or /var/run directory.

Note: File context can be temporarily modified with the chcon command.  If you want to permanently change the file context you need to use the semanage fcontext command.  This will modify the SELinux labeling database.  You will need to use restorecon to apply the labels.

Commands

semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove policy modules.

semanage port can also be used to manipulate the port definitions

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux policy settings.

Author

This manual page was auto-generated using sepolicy manpage .

See Also

selinux(8), conntrackd(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8)

Info

18-02-09 SELinux Policy conntrackd