belkin - Man Page
Driver for Belkin serial UPS equipment
Synopsis
belkin -h
belkin -a UPS_NAME [OPTIONS]
Note
This man page only documents the hardware-specific features of the belkin driver. For information about the core driver, see nutupsdrv(8).
Supported Hardware
The belkin driver is known to support the Regulator Pro 525 (F6C525-SER). Other similar models such as the 425 and 625 should also work.
The Trust UPS and older Belkin units are not supported.
This driver only supports serial connections. If your UPS has a USB port, please consult the Hardware Compatibility List (HCL) to see which of the USB drivers you should use.
Extra Arguments
This driver does not support any extra settings in the ups.conf(5).
Bugs
There are dragons lurking within the protocol to this UPS. I have one that essentially behaves like a glorified power strip due to some invasive probing on my part. Don’t mess with it directly.
Note
The driver doesn’t go anywhere near these character sequences, so it won’t zap your UPS. I only mention this here as yet another reminder of the perils of closed hardware.
See Also
The core driver
Other Belkin drivers
Internet resources
The NUT (Network UPS Tools) home page: https://www.networkupstools.org/historic/v2.8.5/
Referenced By
belkinunv(8), nut(7), nutupsdrv(8), upsd(8).