srec_ppx man page

srec_ppx — Stag Prom Programmer hexadecimal format

Description

This is the native hexadecimal format of the Stag Prom Programmer.

Format

The file must start with an asterisk '*' on a line by itself.

Each line has a 16‐bit address, followed by 8‐bit bytes.

The end is indicated by '$S' folloowed by a 16‐bit checksum of the data bytes as 4 hex digits.

Command Line Option

This format is specified using the -PPX command line option.

Size Multiplier

In general, binary data will expand in sized by approximately 3 times when represented with this format (worse if you use shorter lines).

Example

Here is an example PPX file. It contains the data “Hello, World” to be loaded at bytes address 0x0000 (but remember, the file contents are always multiples of four bytes).

*
0000 48 65 6C 6C 6F 2C 20 57 6F 72 6C 64 21 0A $S0473

See Also

http://matthieu.benoit.free.fr/pdf/pp39… http://www.stag.co.uk/

Maintainer

Scott FinneranE‐Mail:scottfinneran@yahoo.com.au
Peter MillerE‐Mail:pmiller@opensource.org.au

Referenced By

srec_cat(1), srec_input(1).

SRecord Reference Manual