freeipmi_interpret_sensor.conf - Man Page

specify sensor interpretation rules

Description

The /etc/freeipmi//freeipmi_interpret_sensor.conf defines how IPMI sensors should be interpreted. IPMI based sensors specify a number of states/thresholds when they are read. Based on those states/thresholds, libraries and tools such as libfreeipmi(3), libipmimonitoring(3) and ipmi-sensors(8) can report if a sensor reading is "good" or "bad" via a report of a NOMINAL, WARNING, or CRITICAL state.

Each of the states listed below are (hopefully) descriptive enough to describe the state conditions that may be set/unset for each sensor type. For more detailed information on each of the individual states listed below, please see the IPMI Specification "Sensor and Event Code Tables". Ipmi-sensors(8) can be used to determine the sensor types and the states/thresholds that exist on a system by outputting very verbose output and seeing what types of Assertion or Deassertion events are possible.

The possible values for all states/thresholds below are:

Nominal - Signal Nominal reading if state/threshold tripped

Warning - Signal Warning reading if state/treshold tripped

Critical - Signal Critical reading if state/threshold tripped

Not all IPMI sensor types and event types are currently supported. If you would like more to be supported, please e-mail the FreeIPMI mailing list.

The default values selected for individual states/thresholds being tripped are based on best guesses and motherboards being analyzed. If you think they should be changed, please e-mail the FreeIPMI mailing list to discuss what the defaults should be.

Most default interpretations can be determined quite easily and can meet the needs of most users. For example, a reading of "Performance_Met" is normally better than "Performance_Lags". However, some sensors can be ambiguous and depend completely on the manufacturer. For example, "State_Asserted" vs. "State_Deasserted" are completely at the interpretation of the vendor. Users are advised to adjust the interpretations below as needed for their machines.

Every group of state conditions below includes a configuration for "No_Event". This is the condition under which no sensor states/events have occurred or are triggered. Under most conditions, a mapping to "Nominal" is preferred. However, under some circumstances, it may be useful to report something else. For example, if a sensor on a particular motherboard is required to report a state/event, a no sensor state condition could indicate a broken a sensor. This is highly dependent on the motherboard.

Format

The configuration options that can be specified in the configuration file are listed below. Each configuration option must be listed on a separate line. Arguments for an option are separated by any amount of whitespace. Multiple arguments are also separated by whitespace. Comments can be marked by using the pound sign ("#") character, and lines can be continued on the next using backslash ("\").

Options

IPMI_Threshold_Sensor

The following states correspond to threshold sensors. This normally applies to sensors that measure non-discrete values, such as temperatures, voltages, RPM, etc.

IPMI_Threshold_Sensor_No_Event

Defaults to Nominal.

IPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Critical_Threshold

Defaults to Nominal.

IPMI_Threshold_Sensor_At_Or_Below_Lower_Critical_Threshold

Defaults to Critical.

IPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Recoverable_Threshold

Defaults to Critical.

IPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Critical_Threshold

Defaults to Nominal.

IPMI_Threshold_Sensor_At_Or_Above_Upper_Critical_Threshold

Defaults to Critical.

IPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Recoverable_Threshold

Defaults to Critical.

IPMI_Temperature_State

The following states correspond to Temperature sensors that report an assertion or deassertion.

IPMI_Temperature_State_No_Event

Defaults to Nominal.

IPMI_Temperature_State_Deasserted

Defaults to Nominal.

IPMI_Temperature_State_Asserted

Defaults to Warning.

IPMI_Temperature_Limit

The following states correspond to Temperature sensors that report on limits.

IPMI_Temperature_Limit_No_Event

Defaults to Nominal.

IPMI_Temperature_Limit_Not_Exceeded

Defaults to Nominal.

IPMI_Temperature_Limit_Exceeded

Defaults to Critical.

IPMI_Temperature_Transition_Severity

The following states correspond to Temperature sensors that report on device severity.

IPMI_Temperature_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Temperature_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Temperature_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Temperature_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Voltage_State

The following states correspond to Voltage sensors that report an assertion or deassertion.

IPMI_Voltage_State_No_Event

Defaults to Nominal.

IPMI_Voltage_State_Deasserted

Defaults to Nominal.

IPMI_Voltage_State_Asserted

Defaults to Warning.

IPMI_Voltage_Limit

The following states correspond to Voltage sensors that report on limits.

IPMI_Voltage_Limit_No_Event

Defaults to Nominal.

IPMI_Voltage_Limit_Not_Exceeded

Defaults to Nominal.

IPMI_Voltage_Limit_Exceeded

Defaults to Critical.

IPMI_Voltage_Performance

The following states correspond to Voltage sensors that report on performance.

IPMI_Voltage_Performance_No_Event

Defaults to Nominal.

IPMI_Voltage_Performance_Met

Defaults to Nominal.

IPMI_Voltage_Performance_Lags

Defaults to Critical.

IPMI_Voltage_Transition_Severity

The following states correspond to Voltage sensors that report on device severity.

IPMI_Voltage_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Voltage_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Voltage_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Voltage_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Current_Transition_Severity

The following states correspond to Current sensors that report on device severity.

IPMI_Current_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Current_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Current_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Current_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Current_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Current_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Current_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Fan_State

The following states correspond to Fan sensors that report an assertion or deassertion.

IPMI_Fan_State_No_Event

Defaults to Nominal.

IPMI_Fan_State_Deasserted

Defaults to Nominal.

IPMI_Fan_State_Asserted

Defaults to Warning.

IPMI_Fan_Transition_Severity

The following states correspond to Fan sensors that report on device severity.

IPMI_Fan_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Fan_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Fan_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Fan_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Fan_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Fan_Device_Present

The following states correspond to Fan sensors that report on device installation.

IPMI_Fan_Device_Present_Device_No_Event

Defaults to Nominal.

IPMI_Fan_Device_Present_Device_Removed_Device_Absent

Defaults to Critical.

IPMI_Fan_Device_Present_Device_Inserted_Device_Present

Defaults to Nominal.

IPMI_Power_Supply_Transition_Severity

The following states correspond to Power Supply sensors that report on device severity.

IPMI_Power_Supply_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Power_Supply_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Power_Supply_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Power_Supply_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Fan_Transition_Availability

The following states correspond to Fan sensors that report on device availability.

IPMI_Fan_Transition_Availability_No_Event

Defaults to Nominal.

IPMI_Fan_Transition_Availability_To_Running

Defaults to Nominal.

IPMI_Fan_Transition_Availability_To_In_Test

Defaults to Warning.

IPMI_Fan_Transition_Availability_To_Power_Off

Defaults to Warning.

IPMI_Fan_Transition_Availability_To_On_Line

Defaults to Warning.

IPMI_Fan_Transition_Availability_To_Off_Line

Defaults to Warning.

IPMI_Fan_Transition_Availability_To_Off_Duty

Defaults to Warning.

IPMI_Fan_Transition_Availability_To_Degraded

Defaults to Critical.

IPMI_Fan_Transition_Availability_To_Power_Save

Defaults to Warning.

IPMI_Fan_Transition_Availability_Install_Error

Defaults to Critical.

IPMI_Fan_Redundancy

The following states correspond to Fan sensors that report on redundancy.

IPMI_Fan_Redundancy_No_Event

Defaults to Nominal.

IPMI_Fan_Redundancy_Fully_Redundant

Defaults to Nominal.

IPMI_Fan_Redundancy_Redundancy_Lost

Defaults to Critical.

IPMI_Fan_Redundancy_Redundancy_Degraded

Defaults to Warning.

IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant

Defaults to Critical.

IPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy

Defaults to Critical.

IPMI_Fan_Redundancy_Non_Redundant_Insufficient_Resources

Defaults to Critical.

IPMI_Fan_Redundancy_Redundancy_Degraded_From_Fully_Redundant

Defaults to Warning.

IPMI_Fan_Redundancy_Redundancy_Degraded_From_Non_Redundant

Defaults to Warning.

IPMI_Physical_Security

The following states correspond to Physical Security sensors w/ Physical Security specific output states.

IPMI_Physical_Security_No_Event

Defaults to Nominal.

IPMI_Physical_Security_General_Chassis_Intrusion

Defaults to Critical.

IPMI_Physical_Security_Drive_Bay_Intrusion

Defaults to Critical.

IPMI_Physical_Security_IO_Card_Intrusion

Defaults to Critical.

IPMI_Physical_Security_Processor_Area_Intrusion

Defaults to Critical.

IPMI_Physical_Security_LAN_Leash_Lost

Defaults to Critical.

IPMI_Physical_Security_Unauthorized_Dock_Undock

Defaults to Critical.

IPMI_Physical_Security_FAN_Area_Intrusion

Defaults to Critical.

IPMI_Platform_Security_Violation_Attempt

The following states correspond to Platform Violation Attempt sensors w/ Platform Security Violation Attempt specific output states.

IPMI_Platform_Security_Violation_Attempt_No_Event

Defaults to Nominal.

IPMI_Platform_Security_Violation_Attempt_Secure_Mode_Violation_Attempt

Defaults to Critical.

IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_User_Password

Defaults to Critical.

IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Attempt_Setup_Password

Defaults to Critical.

IPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Network_Boot_Password

Defaults to Critical.

IPMI_Platform_Security_Violation_Attempt_Other_Pre_Boot_Password_Violation

Defaults to Critical.

IPMI_Platform_Security_Violation_Attempt_Out_Of_Band_Access_Password_Violation

Defaults to Critical.

IPMI_Processor

The following states correspond to Processor sensors w/ Processor specific output states.

IPMI_Processor_No_Event

Defaults to Nominal.

IPMI_Processor_IERR

Defaults to Critical.

IPMI_Processor_Thermal_Trip

Defaults to Critical.

IPMI_Processor_FRB1_BIST_Failure

Defaults to Critical.

IPMI_Processor_FRB2_Hang_In_POST_Failure

Defaults to Critical.

IPMI_Processor_FRB3_Processor_Startup_Initialization_Failure

Defaults to Critical.

IPMI_Processor_Configuration_Error

Defaults to Critical.

IPMI_Processor_SMBIOS_Uncorrectable_CPU_Complex_Error

Defaults to Critical.

IPMI_Processor_Processor_Presence_Detected

Defaults to Nominal.

IPMI_Processor_Processor_Disabled

Defaults to Critical.

IPMI_Processor_Terminator_Presence_Detected

Defaults to Critical.

IPMI_Processor_Processor_Automatically_Throttled

Defaults to Warning.

IPMI_Processor_Machine_Check_Exception

Defaults to Critical.

IPMI_Processor_Correctable_Machine_Check_Error

Defaults to Warning.

IPMI_Processor_State

The following states correspond to Processor sensors that report an assertion or deassertion.

IPMI_Processor_State_No_Event

Defaults to Nominal.

IPMI_Processor_State_Deasserted

Defaults to Nominal.

IPMI_Processor_State_Asserted

Defaults to Critical.

IPMI_Power_Supply

The following states correspond to Power Supply sensors w/ Power Supply specific output states.

IPMI_Power_Supply_No_Event

Defaults to Nominal.

IPMI_Power_Supply_Presence_Detected

Defaults to Nominal.

IPMI_Power_Supply_Power_Supply_Failure_Detected

Defaults to Critical.

IPMI_Power_Supply_Predictive_Failure

Defaults to Critical.

IPMI_Power_Supply_Power_Supply_Input_Lost_AC_DC

Defaults to Critical.

IPMI_Power_Supply_Power_Supply_Input_Lost_Or_Out_Of_Range

Defaults to Critical.

IPMI_Power_Supply_Power_Supply_Input_Out_Of_Range_But_Present

Defaults to Critical.

IPMI_Power_Supply_Configuration_Error

Defaults to Critical.

IPMI_Power_Supply_Power_Supply_Inactive

Defaults to Warning.

IPMI_Power_Supply_State

The following states correspond to Power_Supply sensors that report an assertion or deassertion.

IPMI_Power_Supply_State_No_Event

Defaults to Nominal.

IPMI_Power_Supply_State_Deasserted

Defaults to Critical.

IPMI_Power_Supply_State_Asserted

Defaults to Nominal.

IPMI_Power_Supply_Redundancy

The following states correspond to Power Supply sensors that report on redundancy.

IPMI_Power_Supply_Redundancy_No_Event

Defaults to Nominal.

IPMI_Power_Supply_Redundancy_Fully_Redundant

Defaults to Nominal.

IPMI_Power_Supply_Redundancy_Redundancy_Lost

Defaults to Critical.

IPMI_Power_Supply_Redundancy_Redundancy_Degraded

Defaults to Warning.

IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant

Defaults to Critical.

IPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy

Defaults to Critical.

IPMI_Power_Supply_Redundancy_Non_Redundant_Insufficient_Resources

Defaults to Critical.

IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Fully_Redundant

Defaults to Warning.

IPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Non_Redundant

Defaults to Warning.

IPMI_Power_Unit

The following states correspond to Power Unit sensors w/ Power Unit specific output states.

IPMI_Power_Unit_No_Event

Defaults to Nominal.

IPMI_Power_Unit_Power_Off_Power_Down

Defaults to Nominal.

IPMI_Power_Unit_Power_Cycle

Defaults to Nominal.

IPMI_Power_Unit_240VA_Power_Down

Defaults to Warning.

IPMI_Power_Unit_Interlock_Power_Down

Defaults to Warning.

IPMI_Power_Unit_AC_Lost

Defaults to Critical.

IPMI_Power_Unit_Soft_Power_Control_Failure

Defaults to Critical.

IPMI_Power_Unit_Power_Unit_Failure_Detected

Defaults to Critical.

IPMI_Power_Unit_Predictive_Failure

Defaults to Critical.

IPMI_Power_Unit_Device_Present

The following states correspond to Power Unit sensors that report on device installation.

IPMI_Power_Unit_Device_Present_No_Event

Defaults to Nominal.

IPMI_Power_Unit_Device_Present_Device_Removed_Device_Absent

Defaults to Critical.

IPMI_Power_Unit_Device_Present_Device_Inserted_Device_Present

Defaults to Nominal.

IPMI_Power_Unit_Redundancy

The following states correspond to Power Unit sensors that report on redundancy.

IPMI_Power_Unit_Redundancy_No_Event

Defaults to Nominal.

IPMI_Power_Unit_Redundancy_Fully_Redundant

Defaults to Nominal.

IPMI_Power_Unit_Redundancy_Redundancy_Lost

Defaults to Critical.

IPMI_Power_Unit_Redundancy_Redundancy_Degraded

Defaults to Warning.

IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant

Defaults to Critical.

IPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy

Defaults to Critical.

IPMI_Power_Unit_Redundancy_Non_Redundant_Insufficient_Resources

Defaults to Critical.

IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Fully_Redundant

Defaults to Warning.

IPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Non_Redundant

Defaults to Warning.

IPMI_Cooling_Device_Redundancy

The following states correspond to Cooling Device sensors that report on redundancy.

IPMI_Cooling_Device_Redundancy_No_Event

Defaults to Nominal.

IPMI_Cooling_Device_Redundancy_Fully_Redundant

Defaults to Nominal.

IPMI_Cooling_Device_Redundancy_Redundancy_Lost

Defaults to Critical.

IPMI_Cooling_Device_Redundancy_Redundancy_Degraded

Defaults to Warning.

IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant

Defaults to Critical.

IPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy

Defaults to Critical.

IPMI_Cooling_Device_Redundancy_Non_Redundant_Insufficient_Resources

Defaults to Critical.

IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Fully_Redundant

Defaults to Warning.

IPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Non_Redundant

Defaults to Warning.

IPMI_Memory

The following states correspond to Memory sensors w/ Memory specific output states.

IPMI_Memory_No_Event

Defaults to Nominal.

IPMI_Memory_Correctable_Memory_Error

Defaults to Warning.

IPMI_Memory_Uncorrectable_Memory_Error

Defaults to Critical.

IPMI_Memory_Parity

Defaults to Critical.

IPMI_Memory_Memory_Scrub_Failed

Defaults to Critical.

IPMI_Memory_Memory_Device_Disabled

Defaults to Critical.

IPMI_Memory_Correctable_Memory_Error_Logging_Limit_Reached

Defaults to Warning.

IPMI_Memory_Presence_Detected

Defaults to Nominal.

IPMI_Memory_Configuration_Error

Defaults to Critical.

IPMI_Memory_Spare

Defaults to Nominal.

IPMI_Memory_Memory_Automatically_Throttled

Defaults to Warning.

IPMI_Memory_Critical_Overtemperature

Defaults to Critical.

IPMI_Memory_State

The following states correspond to Memory sensors that report an assertion or deassertion.

IPMI_Memory_State_No_Event

Defaults to Nominal.

IPMI_Memory_State_Deasserted

Defaults to Nominal.

IPMI_Memory_State_Asserted

Defaults to Critical.

IPMI_Memory_Transition_Severity

The following states correspond to Memory sensors that report on device severity.

IPMI_Memory_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Memory_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Memory_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Memory_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Memory_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Memory_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Memory_Redundancy

The following states correspond to Cooling Device sensors that report on redundancy.

IPMI_Memory_Redundancy_No_Event

Defaults to Nominal.

IPMI_Memory_Redundancy_Fully_Redundant

Defaults to Nominal.

IPMI_Memory_Redundancy_Redundancy_Lost

Defaults to Critical.

IPMI_Memory_Redundancy_Redundancy_Degraded

Defaults to Warning.

IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant

Defaults to Critical.

IPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy

Defaults to Critical.

IPMI_Memory_Redundancy_Non_Redundant_Insufficient_Resources

Defaults to Critical.

IPMI_Memory_Redundancy_Redundancy_Degraded_From_Fully_Redundant

Defaults to Warning.

IPMI_Memory_Redundancy_Redundancy_Degraded_From_Non_Redundant

Defaults to Warning.

IPMI_Drive_Slot

The following states correspond to Drive Slot sensors w/ Drive Slot specific output states.

IPMI_Drive_Slot_No_Event

Defaults to Nominal.

IPMI_Drive_Slot_Drive_Presence

Defaults to Nominal.

IPMI_Drive_Slot_Drive_Fault

Defaults to Critical.

IPMI_Drive_Slot_Predictive_Failure

Defaults to Critical.

IPMI_Drive_Slot_Hot_Spare

Defaults to Nominal.

IPMI_Drive_Slot_Consistency_Check_Parity_Check_In_Progress

Defaults to Nominal.

IPMI_Drive_Slot_In_Critical_Array

Defaults to Critical.

IPMI_Drive_Slot_In_Failed_Array

Defaults to Critical.

IPMI_Drive_Slot_Rebuild_Remap_In_Progress

Defaults to Nominal.

IPMI_Drive_Slot_Rebuild_Remap_Aborted

Defaults to Critical.

IPMI_Drive_Slot_State

The following states correspond to Drive Slot sensors that report an assertion or deassertion.

IPMI_Drive_Slot_State_No_Event

Defaults to Nominal.

IPMI_Drive_Slot_State_Deasserted

Defaults to Warning.

IPMI_Drive_Slot_State_Asserted

Defaults to Nominal.

IPMI_Drive_Slot_Predictive_Failure

The following states correspond to Drive_Slot sensors that report a predictive failure assertion or deassertion.

IPMI_Drive_Slot_Predictive_Failure_No_Event

Defaults to Nominal.

IPMI_Drive_Slot_Predictive_Failure_Deasserted

Defaults to Nominal.

IPMI_Drive_Slot_Predictive_Failure_Asserted

Defaults to Critical.

IPMI_Drive_Slot_Device_Present

The following states correspond to Drive Slot sensors that report on device installation.

IPMI_Drive_Slot_Device_Present_No_Event

Defaults to Nominal.

IPMI_Drive_Slot_Device_Present_Device_Removed_Device_Absent

Defaults to Critical.

IPMI_Drive_Slot_Device_Present_Device_Inserted_Device_Present

Defaults to Nominal.

IPMI_POST_Memory_Resize_State

The following states correspond to POST Memory Resize sensors that report an assertion or deassertion.

IPMI_POST_Memory_Resize_State_No_Event

Defaults to Nominal.

IPMI_POST_Memory_Resize_State_Deasserted

Defaults to Nominal.

IPMI_POST_Memory_Resize_State_Asserted

Defaults to Warning.

IPMI_System_Firmware_Progress

The following states correspond to System Firmware Progress sensors w/ System Firmware Progress specific output states.

IPMI_System_Firmware_Progress_No_Event

Defaults to Nominal.

IPMI_System_Firmware_Progress_System_Firmware_Error

Defaults to Critical.

IPMI_System_Firmware_Progress_System_Firmware_Hang

Defaults to Critical.

IPMI_System_Firmware_Progress_System_Firmware_Progress

Defaults to Nominal.

IPMI_System_Firmware_Progress_Transition_Severity

The following states correspond to System Firmware Progress sensors that report on device severity.

IPMI_System_Firmware_Progress_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_System_Firmware_Progress_Transition_Severity_Monitor

Defaults to Warning.

IPMI_System_Firmware_Progress_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Event_Logging_Disabled

The following states correspond to Event Logging Disabled sensors w/

IPMI_Event_Logging_Disabled_No_Event

Defaults to Nominal.

IPMI_Event_Logging_Disabled_Correctable_Memory_Error_Logging_Disabled

Defaults to Critical.

IPMI_Event_Logging_Disabled_Event_Type_Logging_Disabled

Defaults to Critical.

IPMI_Event_Logging_Disabled_Log_Area_Reset_Cleared

Defaults to Nominal.

IPMI_Event_Logging_Disabled_All_Event_Logging_Disabled

Defaults to Critical.

IPMI_Event_Logging_Disabled_SEL_Full

Defaults to Critical.

IPMI_Event_Logging_Disabled_SEL_Almost_Full

Defaults to Warning.

IPMI_Event_Logging_Disabled_Correctable_Machine_Check_Error_Logging_Disabled

Defaults to Critical.

IPMI_System_Event

The following states correspond to System Event sensors w/ System Event specific output states.

IPMI_System_Event_No_Event

Defaults to Nominal.

IPMI_System_Event_System_Reconfigured

Defaults to Warning.

IPMI_System_Event_OEM_System_Boot_Event

Defaults to Nominal.

IPMI_System_Event_Undetermined_System_Hardware_Failure

Defaults to Critical.

IPMI_System_Event_Entry_Added_To_Auxiliary_Log

Defaults to Nominal.

IPMI_System_Event_PEF_Action

Defaults to Nominal.

IPMI_System_Event_Timestamp_Clock_Sync

Defaults to Warning.

IPMI_System_Event_Transition_State

The following states correspond to System Event sensors that report a transition state.

IPMI_System_Event_Transition_State_No_Event

Defaults to Nominal.

IPMI_System_Event_Transition_State_Active

Defaults to Nominal.

IPMI_System_Event_Transition_State_Idle

Defaults to Nominal.

IPMI_System_Event_Transition_State_Busy

Defaults to Nominal.

IPMI_System_Event_State

The following states correspond to System Event sensors that report an assertion or deassertion.

IPMI_System_Event_State_No_Event

Defaults to Nominal.

IPMI_System_Event_State_Deasserted

Defaults to Nominal.

IPMI_System_Event_State_Asserted

Defaults to Warning.

IPMI_Critical_Interrupt

The following states correspond to Critical Interrupt sensors w/ Critical Interrupt specific output states.

IPMI_Critical_Interrupt_No_Event

Defaults to Nominal.

IPMI_Critical_Interrupt_Front_Panel_NMI_Diagnostic_Interrupt

Defaults to Critical.

IPMI_Critical_Interrupt_Bus_Timeout

Defaults to Critical.

IPMI_Critical_Interrupt_IO_Channel_Check_NMI

Defaults to Critical.

IPMI_Critical_Interrupt_Software_NMI

Defaults to Warning.

IPMI_Critical_Interrupt_PCI_PERR

Defaults to Critical.

IPMI_Critical_Interrupt_PCI_SERR

Defaults to Critical.

IPMI_Critical_Interrupt_EISA_Fail_Safe_Timeout

Defaults to Critical.

IPMI_Critical_Interrupt_Bus_Correctable_Error

Defaults to Warning.

IPMI_Critical_Interrupt_Bus_Uncorrectable_Error

Defaults to Critical.

IPMI_Critical_Interrupt_Fatal_NMI

Defaults to Critical.

IPMI_Critical_Interrupt_Bus_Fatal_Error

Defaults to Critical. IPMI_Critical_Interrupt_Bus_Degraded Defaults to Warning.

IPMI_Button_Switch

The following states correspond to Button/Switch sensors w/ Button/Switch specific output states.

IPMI_Button_Switch_No_Event

Defaults to Nominal.

IPMI_Button_Switch_Power_Button_Pressed

Defaults to Nominal.

IPMI_Button_Switch_Sleep_Button_Pressed

Defaults to Nominal.

IPMI_Button_Switch_Reset_Button_Pressed

Defaults to Nominal.

IPMI_Button_Switch_FRU_Latch_Open

Defaults to Warning.

IPMI_Button_Switch_FRU_Service_Request_Button

Defaults to Warning.

IPMI_Button_Switch_State

The following states correspond to Button/Switch sensors that report an assertion or deassertion.

IPMI_Button_Switch_State_No_Event

Defaults to Nominal.

IPMI_Button_Switch_State_Deasserted

Defaults to Nominal.

IPMI_Button_Switch_State_Asserted

Defaults to Nominal.

IPMI_Button_Switch_Transition_Severity

The following states correspond to Button/Switch sensors that report on device severity.

IPMI_Button_Switch_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Button_Switch_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Button_Switch_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Button_Switch_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Button_Switch_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Button_Switch_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Module_Board_State

The following states correspond to Module/Board sensors that report an assertion or deassertion.

IPMI_Module_Board_State_No_Event

Defaults to Nominal.

IPMI_Module_Board_State_Deasserted

Defaults to Nominal.

IPMI_Module_Board_State_Asserted

Defaults to Critical.

IPMI_Module_Board_Device_Present

The following states correspond to Module/Board sensors that report on device installation.

IPMI_Module_Board_Device_Present_No_Event

Defaults to Nominal.

IPMI_Module_Board_Device_Present_Device_Removed_Device_Absent

Defaults to Critical.

IPMI_Module_Board_Device_Present_Device_Inserted_Device_Present

Defaults to Nominal.

IPMI_Chassis_Transition_Severity

The following states correspond to Chassis sensors that report on device severity.

IPMI_Chassis_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Chassis_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Chassis_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Chassis_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Chip_Set_Transition_Severity

The following states correspond to Chip Set sensors that report on device severity.

IPMI_Chip_Set_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Chip_Set_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Chip_Set_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Chip_Set_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Cable_Interconnect

The following states correspond to Cable/Interconnect sensors w/ Cable/Interconnect specific output states.

IPMI_Cable_Interconnect_No_Event

Defaults to Nominal.

IPMI_Cable_Interconnect_Is_Connected

Defaults to Nominal.

IPMI_Cable_Interconnect_Configuration_Error

Defaults to Critical.

IPMI_Cable_Interconnect_Transition_Severity

The following states correspond to Cable/Interconnect sensors that report on device severity.

IPMI_Cable_Interconnect_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Cable_Interconnect_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Cable_Interconnect_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Cable_Interconnect_Transition_Severity_Informational

Defaults to Nominal.

IPMI_Boot_Error

The following states correspond to Boot Error sensors w/ Boot Error specific output states.

IPMI_Boot_Error_No_Event

Defaults to Nominal.

IPMI_Boot_Error_No_Bootable_Media

Defaults to Critical.

IPMI_Boot_Error_Non_Bootable_Diskette_Left_In_Drive

Defaults to Critical.

IPMI_Boot_Error_PXE_Server_Not_Found

Defaults to Critical.

IPMI_Boot_Error_Invalid_Boot_Sector

Defaults to Critical.

IPMI_Boot_Error_Timeout_Waiting_For_User_Selection_Of_Boot_Source

Defaults to Warning.

IPMI_Boot_Error_State

The following states correspond to Boot Error sensors that report an assertion or deassertion.

IPMI_Boot_Error_State_No_Event

Defaults to Nominal.

IPMI_Boot_Error_State_Deasserted

Defaults to Nominal.

IPMI_Boot_Error_State_Asserted

Defaults to Critical.

IPMI_Boot_Error_Transition_Severity

The following states correspond to Boot Error sensors that report on device severity.

IPMI_Boot_Error_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Boot_Error_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Boot_Error_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Boot_Error_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Boot_Error_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Boot_Error_Transition_Severity_Informational

Defaults to Nominal.

IPMI_OS_Boot

The following states correspond to OS Boot sensors w/ OS Boot specific output events.
IPMI_OS_Boot_No_Event Defaults to Nominal. IPMI_OS_Boot_A_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_C_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_PXE_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_Diagnostic_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_CD_ROM_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_ROM_Boot_Completed Defaults to Nominal. IPMI_OS_Boot_Boot_Completed_Boot_Device_Not_Specified Defaults to Warning. IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Started Defaults to Nominal. IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Completed Defaults to Nominal. IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Aborted Defaults to Warning. IPMI_OS_Boot_Base_OS_Hypervisor_Installation_Failed Defaults to Critical.

IPMI_OS_Critical_Stop_State

The following states correspond to OS Critical Stop sensors that report an assertion or deassertion.

IPMI_OS_Critical_Stop_State_No_Event

Defaults to Nominal.

IPMI_OS_Critical_Stop_State_Deasserted

Defaults to Nominal.

IPMI_OS_Critical_Stop_State_Asserted

Defaults to Critical.

IPMI_Slot_Connector

The following states correspond to Slot Connector sensors w/ Slot Connector specific output states.

IPMI_Slot_Connector_No_Event

Defaults to Nominal.

IPMI_Slot_Connector_Fault_Status_Asserted

Defaults to Critical.

IPMI_Slot_Connector_Identify_Status_Asserted

Defaults to Warning.

IPMI_Slot_Connector_Slot_Connector_Device_Installed_Attached

Defaults to Nominal.

IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Installation

Defaults to Nominal.

IPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Removal

Defaults to Nominal.

IPMI_Slot_Connector_Slot_Power_Is_Off

Defaults to Nominal.

IPMI_Slot_Connector_Slot_Connector_Device_Removal_Request

Defaults to Warning.

IPMI_Slot_Connector_Interlock_Asserted

Defaults to Warning.

IPMI_Slot_Connector_Slot_Is_Disabled

Defaults to Warning.

IPMI_Slot_Connector_Slot_Holds_Spare_Device

Defaults to Nominal.

IPMI_Slot_Connector_Transition_Severity

The following states correspond to Slot Connector sensors that report on device severity.

IPMI_Slot_Connector_Transition_Severity_No_Event

Defaults to Nominal.

IPMI_Slot_Connector_Transition_Severity_Transition_To_OK

Defaults to Nominal.

IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Critical_From_OK

Defaults to Warning.

IPMI_Slot_Connector_Transition_Severity_Transition_To_Critical_From_Less_Severe

Defaults to Critical.

IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe

Defaults to Critical.

IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Critical_From_More_Severe

Defaults to Warning.

IPMI_Slot_Connector_Transition_Severity_Transition_To_Critical_From_Non_Recoverable

Defaults to Critical.

IPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recoverable

Defaults to Critical.

IPMI_Slot_Connector_Transition_Severity_Monitor

Defaults to Warning.

IPMI_Slot_Connector_Transition_Severity_Informational

Defaults to Nominal.

IPMI_System_ACPI_Power_State
IPMI_System_ACPI_Power_State_No_Event

Defaults to Nominal.

IPMI_System_ACPI_Power_State_S0_G0

Defaults to Nominal.

IPMI_System_ACPI_Power_State_S1

Defaults to Nominal.

IPMI_System_ACPI_Power_State_S2

Defaults to Nominal.

IPMI_System_ACPI_Power_State_S3

Defaults to Nominal.

IPMI_System_ACPI_Power_State_S4

Defaults to Nominal.

IPMI_System_ACPI_Power_State_S5_G2

Defaults to Nominal.

IPMI_System_ACPI_Power_State_S4_S5_Soft_Off

Defaults to Nominal.

IPMI_System_ACPI_Power_State_G3_Mechanical_Off

Defaults to Nominal.

IPMI_System_ACPI_Power_State_Sleeping_in_an_S1_S2_or_S3_States

Defaults to Nominal.

IPMI_System_ACPI_Power_State_G1_Sleeping

Defaults to Nominal.

IPMI_System_ACPI_Power_State_S5_Entered_By_Override

Defaults to Nominal.

IPMI_System_ACPI_Power_State_Legacy_ON_State

Defaults to Nominal.

IPMI_System_ACPI_Power_State_Legacy_OFF_State

Defaults to Nominal.

IPMI_System_ACPI_Power_State_Unspecified

Defaults to Critical.

IPMI_System_ACPI_Power_State_Unknown

Defaults to Critical.

IPMI_Watchdog2

The following states correspond to Watchdog 2 sensors w/ Watchdog 2 specific output states.

IPMI_Watchdog2_No_Event

Defaults to Nominal.

IPMI_Watchdog2_Timer_Expired

Defaults to Warning.

IPMI_Watchdog2_Hard_Reset

Defaults to Critical.

IPMI_Watchdog2_Power_Down

Defaults to Critical.

IPMI_Watchdog2_Power_Cycle

Defaults to Critical.

IPMI_Watchdog2_Reserved1

Defaults to Nominal.

IPMI_Watchdog2_Reserved2

Defaults to Nominal.

IPMI_Watchdog2_Reserved3

Defaults to Nominal.

IPMI_Watchdog2_Reserved4

Defaults to Nominal.

IPMI_Watchdog2_Timer_Interrupt

Defaults to Warning.

IPMI_Platform_Alert_State

The following states correspond to Platform Alert sensors that report an assertion or deassertion.

IPMI_Platform_Alert_State_No_Event

Defaults to Nominal.

IPMI_Platform_Alert_State_Deasserted

Defaults to Nominal.

IPMI_Platform_Alert_State_Asserted

Defaults to Critical.

IPMI_Entity_Presence

The following states correspond to Entity Presence sensors w/ Entity Presence specific output states.

IPMI_Entity_Presence_No_Event

Defaults to Nominal.

IPMI_Entity_Presence_Entity_Present

Defaults to Nominal.

IPMI_Entity_Presence_Entity_Absent

Defaults to Critical.

IPMI_Entity_Presence_Entity_Disabled

Defaults to Critical.

IPMI_Entity_Presence_Device_Present

The following states correspond to Entity Presence sensors that report on device installation.

IPMI_Entity_Presence_Device_Present_No_Event

Defaults to Nominal.

IPMI_Entity_Presence_Device_Present_Device_Removed_Device_Absent

Defaults to Nominal.

IPMI_Entity_Presence_Device_Present_Device_Inserted_Device_Present

Defaults to Nominal.

IPMI_Management_Subsystem_Health

The following states correspond to Management Subsystem Health sensors w/ Management Subsystem Health specific output states.

IPMI_Management_Subsystem_Health_No_Event

Defaults to Nominal.

IPMI_Management_Subsystem_Health_Sensor_Access_Degraded_Or_Unavailable

Defaults to Critical.

IPMI_Management_Subsystem_Health_Controller_Access_Degraded_Or_Unavailable

Defaults to Critical.

IPMI_Management_Subsystem_Health_Management_Controller_Off_Line

Defaults to Critical.

IPMI_Management_Subsystem_Health_Management_Controller_Unavailable

Defaults to Critical.

IPMI_Management_Subsystem_Health_Sensor_Failure

Defaults to Critical.

IPMI_Management_Subsystem_Health_FRU_Failure

Defaults to Critical.

IPMI_Battery

The following states correspond to Battery sensors w/ Battery specific output states.

IPMI_Battery_No_Event

Defaults to Nominal.

IPMI_Battery_Battery_Low

Defaults to Warning.

IPMI_Battery_Battery_Failed

Defaults to Critical.

IPMI_Battery_Battery_Presence_Detected

Defaults to Nominal.

IPMI_Session_Audit

The following states correspond to Session Audit sensors w/ Session_Audit specific output states.

IPMI_Version_Change_No_Event

Defaults to Nominal.

IPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity

Defaults to Warning.

IPMI_Version_Change_Firmware_Or_Software_Change_Detected_With_Associated_Entity

Defaults to Warning.

IPMI_Version_Change_Hardware_Incompatability_Detected_With_Associated_Entity

Defaults to Critical.

IPMI_Version_Change_Firmware_Or_Software_Incompatability_Detected_With_Associated_Entity

Defaults to Critical.

IPMI_Version_Change_Entity_Is_Of_An_Invalid_Or_Unsupported_Hardware_Version

Defaults to Critical.

IPMI_Version_Change_Entity_Contains_An_Invalid_Or_Unsupported_Firmware_Or_Software_Version

Defaults to Critical.

IPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity_Was_Successful

Defaults to Nominal.

IPMI_Version_Change_Software_Or_FW_Change_Detected_With_Associated_Entity_Was_Successful

Defaults to Nominal.

IPMI_FRU_State

The following states correspond to FRU State sensors w/ FRU State specific output states.

IPMI_FRU_State_No_Event

Defaults to Nominal.

IPMI_FRU_State_FRU_Not_Installed

Defaults to Critical.

IPMI_FRU_State_FRU_Inactive

Defaults to Critical.

IPMI_FRU_State_FRU_Activation_Requested

Defaults to Warning.

IPMI_FRU_State_FRU_Activation_In_Progress

Defaults to Warning.

IPMI_FRU_State_FRU_Active

Defaults to Nominal.

IPMI_FRU_State_FRU_Deactivation_Requested

Defaults to Warning.

IPMI_FRU_State_FRU_Deactivation_In_Progress

Defaults to Warning.

IPMI_FRU_State_FRU_Communication_Lost

Defaults to Critical.

IPMI_OEM

The following configuration options can be used to configure OEM specific interpretations. Users should be aware that both IPMI_OEM_Bitmask and IPMI_OEM_Value can be configured for an identical Manufacturer-ID, Product-ID, Event-Reading-Type-Code, and Sensor-Type combination. All interpretations rules for a specific combination are iterated through and the worst resulting sensor state is returned (i.e. Warning < Nominal, Critical < Warning). If no match is found, no sensor state is returned for the OEM sensor reading. For each of the configuration options below, <Manufacturer-ID> is the numeric IANA manufacturer ID for the manufacturer in question. The <Product-ID> is one or more numeric IDs representing the manufacturer's product.  The <Product-ID> can be listed as a single numeric number (e.g. 1234), a range of IDs separated by a dash (e.g. 12-20), or a list of specific product IDs separated by a plus (e.g. 12+19+22). Both the Manufacturer-ID and Product-ID can be found using bmc-info(8). Multiple <Manufacturer-ID> and <Product-ID> pairs can be input separated by commas. The Event-Reading-Type-Code and Sensor-Type need not be OEM types. They may be non-OEM types and used to provide interpretation rules for sensors that may be behaving outside the standard of the IPMI specification.

IPMI_OEM_Bitmask <Manufacturer-ID>:<Product-ID>,... Event-Reading-Type-Code Sensor-Type Sensor-Event-Bitmask State

IPMI_OEM_Bitmask can be used to configure a state interpretation for a specific Manufacturer-ID, Product-ID, Event-Reading-Type-Code, and Sensor-Type combination and a specific bitmask of the Sensor-Event. The state will be accepted as the sensor interpretation if the inputted bitmask ANDed with the actual sensor event bitmask reading is true. As a special case, the state will be accepted if the inputted bitmask and the actual sensor event bitmask are both 0. In other words, if no events happened, an OEM interpretation can be configured for this case by inputing a bitmask of 0x0000.

IPMI_OEM_Value <Manufacturer-ID>:<Product-ID>,... Event-Reading-Type-Code Sensor-Type Sensor-Event-Bitmask-Value State

IPMI_OEM_Value can be used to configure a state interpretation for a specific Manufacturer-ID, Product-ID, Event-Reading-Type-Code, and Sensor-Type combination and a specific value for the Sensor-Event-Bitmask. The state will be accepted as the sensor interpretation if the inputted bitmask value is equal to the actual sensor event bitmask reading.

Files

/etc/freeipmi//freeipmi_interpret_sensor.conf

Reporting Bugs

Report bugs to <freeipmi-users@gnu.org> or <freeipmi-devel@gnu.org>.

See Also

libfreeipmi(3), libipmimonitoring(3), ipmi-sensors(8)

http://www.gnu.org/software/freeipmi/

Referenced By

ipmi-sensors(8), libipmimonitoring(3).

The man pages ipmimonitoring.conf(5), ipmi_monitoring_sensors.conf(5), ipmimonitoring_sensors.conf(5) and libipmimonitoring.conf(5) are aliases of freeipmi_interpret_sensor.conf(5).

2024-07-17 FreeIPMI 1.6.14 Configuration