strevc.f man page

strevc.f —

Synopsis

Functions/Subroutines

subroutine strevc (SIDE, HOWMNY, SELECT, N, T, LDT, VL, LDVL, VR, LDVR, MM, M, WORK, INFO)
STREVC

Function/Subroutine Documentation

subroutine strevc (characterSIDE, characterHOWMNY, logical, dimension( * )SELECT, integerN, real, dimension( ldt, * )T, integerLDT, real, dimension( ldvl, * )VL, integerLDVL, real, dimension( ldvr, * )VR, integerLDVR, integerMM, integerM, real, dimension( * )WORK, integerINFO)

STREVC

Purpose:

STREVC computes some or all of the right and/or left eigenvectors of
a real upper quasi-triangular matrix T.
Matrices of this type are produced by the Schur factorization of
a real general matrix:  A = Q*T*Q**T, as computed by SHSEQR.

The right eigenvector x and the left eigenvector y of T corresponding
to an eigenvalue w are defined by:

   T*x = w*x,     (y**T)*T = w*(y**T)

where y**T denotes the transpose of y.
The eigenvalues are not input to this routine, but are read directly
from the diagonal blocks of T.

This routine returns the matrices X and/or Y of right and left
eigenvectors of T, or the products Q*X and/or Q*Y, where Q is an
input matrix.  If Q is the orthogonal factor that reduces a matrix
A to Schur form T, then Q*X and Q*Y are the matrices of right and
left eigenvectors of A.

Parameters:

SIDE

SIDE is CHARACTER*1
= 'R':  compute right eigenvectors only;
= 'L':  compute left eigenvectors only;
= 'B':  compute both right and left eigenvectors.

HOWMNY

HOWMNY is CHARACTER*1
= 'A':  compute all right and/or left eigenvectors;
= 'B':  compute all right and/or left eigenvectors,
        backtransformed by the matrices in VR and/or VL;
= 'S':  compute selected right and/or left eigenvectors,
        as indicated by the logical array SELECT.

SELECT

SELECT is LOGICAL array, dimension (N)
If HOWMNY = 'S', SELECT specifies the eigenvectors to be
computed.
If w(j) is a real eigenvalue, the corresponding real
eigenvector is computed if SELECT(j) is .TRUE..
If w(j) and w(j+1) are the real and imaginary parts of a
complex eigenvalue, the corresponding complex eigenvector is
computed if either SELECT(j) or SELECT(j+1) is .TRUE., and
on exit SELECT(j) is set to .TRUE. and SELECT(j+1) is set to
.FALSE..
Not referenced if HOWMNY = 'A' or 'B'.

N

N is INTEGER
The order of the matrix T. N >= 0.

T

T is REAL array, dimension (LDT,N)
The upper quasi-triangular matrix T in Schur canonical form.

LDT

LDT is INTEGER
The leading dimension of the array T. LDT >= max(1,N).

VL

VL is REAL array, dimension (LDVL,MM)
On entry, if SIDE = 'L' or 'B' and HOWMNY = 'B', VL must
contain an N-by-N matrix Q (usually the orthogonal matrix Q
of Schur vectors returned by SHSEQR).
On exit, if SIDE = 'L' or 'B', VL contains:
if HOWMNY = 'A', the matrix Y of left eigenvectors of T;
if HOWMNY = 'B', the matrix Q*Y;
if HOWMNY = 'S', the left eigenvectors of T specified by
                 SELECT, stored consecutively in the columns
                 of VL, in the same order as their
                 eigenvalues.
A complex eigenvector corresponding to a complex eigenvalue
is stored in two consecutive columns, the first holding the
real part, and the second the imaginary part.
Not referenced if SIDE = 'R'.

LDVL

LDVL is INTEGER
The leading dimension of the array VL.  LDVL >= 1, and if
SIDE = 'L' or 'B', LDVL >= N.

VR

VR is REAL array, dimension (LDVR,MM)
On entry, if SIDE = 'R' or 'B' and HOWMNY = 'B', VR must
contain an N-by-N matrix Q (usually the orthogonal matrix Q
of Schur vectors returned by SHSEQR).
On exit, if SIDE = 'R' or 'B', VR contains:
if HOWMNY = 'A', the matrix X of right eigenvectors of T;
if HOWMNY = 'B', the matrix Q*X;
if HOWMNY = 'S', the right eigenvectors of T specified by
                 SELECT, stored consecutively in the columns
                 of VR, in the same order as their
                 eigenvalues.
A complex eigenvector corresponding to a complex eigenvalue
is stored in two consecutive columns, the first holding the
real part and the second the imaginary part.
Not referenced if SIDE = 'L'.

LDVR

LDVR is INTEGER
The leading dimension of the array VR.  LDVR >= 1, and if
SIDE = 'R' or 'B', LDVR >= N.

MM

MM is INTEGER
The number of columns in the arrays VL and/or VR. MM >= M.

M

M is INTEGER
The number of columns in the arrays VL and/or VR actually
used to store the eigenvectors.
If HOWMNY = 'A' or 'B', M is set to N.
Each selected real eigenvector occupies one column and each
selected complex eigenvector occupies two columns.

WORK

WORK is REAL array, dimension (3*N)

INFO

INFO is INTEGER
= 0:  successful exit
< 0:  if INFO = -i, the i-th argument had an illegal value

Author:

Univ. of Tennessee

Univ. of California Berkeley

Univ. of Colorado Denver

NAG Ltd.

Date:

November 2011

Further Details:

The algorithm used in this program is basically backward (forward)
substitution, with scaling to make the the code robust against
possible overflow.

Each eigenvector is normalized so that the element of largest
magnitude has magnitude 1; here the magnitude of a complex number
(x,y) is taken to be |x| + |y|.

Definition at line 222 of file strevc.f.

Author

Generated automatically by Doxygen for LAPACK from the source code.

Referenced By

strevc(3) is an alias of strevc.f(3).

Sat Nov 16 2013 Version 3.4.2 LAPACK