sstegr.f man page

sstegr.f —

Synopsis

Functions/Subroutines

subroutine sstegr (JOBZ, RANGE, N, D, E, VL, VU, IL, IU, ABSTOL, M, W, Z, LDZ, ISUPPZ, WORK, LWORK, IWORK, LIWORK, INFO)
SSTEGR

Function/Subroutine Documentation

subroutine sstegr (character JOBZ, character RANGE, integer N, real, dimension( * ) D, real, dimension( * ) E, real VL, real VU, integer IL, integer IU, real ABSTOL, integer M, real, dimension( * ) W, real, dimension( ldz, * ) Z, integer LDZ, integer, dimension( * ) ISUPPZ, real, dimension( * ) WORK, integer LWORK, integer, dimension( * ) IWORK, integer LIWORK, integer INFO)

SSTEGR  

Purpose:

 SSTEGR computes selected eigenvalues and, optionally, eigenvectors
 of a real symmetric tridiagonal matrix T. Any such unreduced matrix has
 a well defined set of pairwise different real eigenvalues, the corresponding
 real eigenvectors are pairwise orthogonal.

 The spectrum may be computed either completely or partially by specifying
 either an interval (VL,VU] or a range of indices IL:IU for the desired
 eigenvalues.

 SSTEGR is a compatibility wrapper around the improved SSTEMR routine.
 See SSTEMR for further details.

 One important change is that the ABSTOL parameter no longer provides any
 benefit and hence is no longer used.

 Note : SSTEGR and SSTEMR work only on machines which follow
 IEEE-754 floating-point standard in their handling of infinities and
 NaNs.  Normal execution may create these exceptiona values and hence
 may abort due to a floating point exception in environments which
 do not conform to the IEEE-754 standard.
Parameters:

JOBZ

          JOBZ is CHARACTER*1
          = 'N':  Compute eigenvalues only;
          = 'V':  Compute eigenvalues and eigenvectors.

RANGE

          RANGE is CHARACTER*1
          = 'A': all eigenvalues will be found.
          = 'V': all eigenvalues in the half-open interval (VL,VU]
                 will be found.
          = 'I': the IL-th through IU-th eigenvalues will be found.

N

          N is INTEGER
          The order of the matrix.  N >= 0.

D

          D is REAL array, dimension (N)
          On entry, the N diagonal elements of the tridiagonal matrix
          T. On exit, D is overwritten.

E

          E is REAL array, dimension (N)
          On entry, the (N-1) subdiagonal elements of the tridiagonal
          matrix T in elements 1 to N-1 of E. E(N) need not be set on
          input, but is used internally as workspace.
          On exit, E is overwritten.

VL

          VL is REAL

          If RANGE='V', the lower bound of the interval to
          be searched for eigenvalues. VL < VU.
          Not referenced if RANGE = 'A' or 'I'.

VU

          VU is REAL

          If RANGE='V', the upper bound of the interval to
          be searched for eigenvalues. VL < VU.
          Not referenced if RANGE = 'A' or 'I'.

IL

          IL is INTEGER

          If RANGE='I', the index of the
          smallest eigenvalue to be returned.
          1 <= IL <= IU <= N, if N > 0.
          Not referenced if RANGE = 'A' or 'V'.

IU

          IU is INTEGER

          If RANGE='I', the index of the
          largest eigenvalue to be returned.
          1 <= IL <= IU <= N, if N > 0.
          Not referenced if RANGE = 'A' or 'V'.

ABSTOL

          ABSTOL is REAL
          Unused.  Was the absolute error tolerance for the
          eigenvalues/eigenvectors in previous versions.

M

          M is INTEGER
          The total number of eigenvalues found.  0 <= M <= N.
          If RANGE = 'A', M = N, and if RANGE = 'I', M = IU-IL+1.

W

          W is REAL array, dimension (N)
          The first M elements contain the selected eigenvalues in
          ascending order.

Z

          Z is REAL array, dimension (LDZ, max(1,M) )
          If JOBZ = 'V', and if INFO = 0, then the first M columns of Z
          contain the orthonormal eigenvectors of the matrix T
          corresponding to the selected eigenvalues, with the i-th
          column of Z holding the eigenvector associated with W(i).
          If JOBZ = 'N', then Z is not referenced.
          Note: the user must ensure that at least max(1,M) columns are
          supplied in the array Z; if RANGE = 'V', the exact value of M
          is not known in advance and an upper bound must be used.
          Supplying N columns is always safe.

LDZ

          LDZ is INTEGER
          The leading dimension of the array Z.  LDZ >= 1, and if
          JOBZ = 'V', then LDZ >= max(1,N).

ISUPPZ

          ISUPPZ is INTEGER array, dimension ( 2*max(1,M) )
          The support of the eigenvectors in Z, i.e., the indices
          indicating the nonzero elements in Z. The i-th computed eigenvector
          is nonzero only in elements ISUPPZ( 2*i-1 ) through
          ISUPPZ( 2*i ). This is relevant in the case when the matrix
          is split. ISUPPZ is only accessed when JOBZ is 'V' and N > 0.

WORK

          WORK is REAL array, dimension (LWORK)
          On exit, if INFO = 0, WORK(1) returns the optimal
          (and minimal) LWORK.

LWORK

          LWORK is INTEGER
          The dimension of the array WORK. LWORK >= max(1,18*N)
          if JOBZ = 'V', and LWORK >= max(1,12*N) if JOBZ = 'N'.
          If LWORK = -1, then a workspace query is assumed; the routine
          only calculates the optimal size of the WORK array, returns
          this value as the first entry of the WORK array, and no error
          message related to LWORK is issued by XERBLA.

IWORK

          IWORK is INTEGER array, dimension (LIWORK)
          On exit, if INFO = 0, IWORK(1) returns the optimal LIWORK.

LIWORK

          LIWORK is INTEGER
          The dimension of the array IWORK.  LIWORK >= max(1,10*N)
          if the eigenvectors are desired, and LIWORK >= max(1,8*N)
          if only the eigenvalues are to be computed.
          If LIWORK = -1, then a workspace query is assumed; the
          routine only calculates the optimal size of the IWORK array,
          returns this value as the first entry of the IWORK array, and
          no error message related to LIWORK is issued by XERBLA.

INFO

          INFO is INTEGER
          On exit, INFO
          = 0:  successful exit
          < 0:  if INFO = -i, the i-th argument had an illegal value
          > 0:  if INFO = 1X, internal error in SLARRE,
                if INFO = 2X, internal error in SLARRV.
                Here, the digit X = ABS( IINFO ) < 10, where IINFO is
                the nonzero error code returned by SLARRE or
                SLARRV, respectively.
Author:

Univ. of Tennessee

Univ. of California Berkeley

Univ. of Colorado Denver

NAG Ltd.

Date:

June 2016

Contributors:

Inderjit Dhillon, IBM Almaden, USA
Osni Marques, LBNL/NERSC, USA
Christof Voemel, LBNL/NERSC, USA

Definition at line 267 of file sstegr.f.

Author

Generated automatically by Doxygen for LAPACK from the source code.

Referenced By

The man page sstegr(3) is an alias of sstegr.f(3).

Sat Jun 24 2017 Version 3.7.1 LAPACK