qcanvasitem.3qt man page

QCanvasItem — Abstract graphic object on a QCanvas

Synopsis

#include <qcanvas.h>

Inherits Qt.

Inherited by QCanvasSprite, QCanvasPolygonalItem, and QCanvasText.

Public Members

QCanvasItem ( QCanvas * canvas )

virtual ~QCanvasItem ()

double x () const

double y () const

double z () const

virtual void moveBy ( double dx, double dy )

void move ( double x, double y )

void setX ( double x )

void setY ( double y )

void setZ ( double z )

bool animated () const

virtual void setAnimated ( bool y )

virtual void setVelocity ( double vx, double vy )

void setXVelocity ( double vx )

void setYVelocity ( double vy )

double xVelocity () const

double yVelocity () const

virtual void advance ( int phase )

virtual bool collidesWith ( const QCanvasItem * other ) const = 0

QCanvasItemList collisions ( bool exact ) const

virtual void setCanvas ( QCanvas * c )

virtual void draw ( QPainter & painter ) = 0

void show ()

void hide ()

virtual void setVisible ( bool yes )

bool isVisible () const

virtual void setSelected ( bool yes )

bool isSelected () const

virtual void setEnabled ( bool yes )

bool isEnabled () const

virtual void setActive ( bool yes )

bool isActive () const

bool visible () const (obsolete)

bool selected () const (obsolete)

bool enabled () const (obsolete)

bool active () const (obsolete)

enum RttiValues { Rtti_Item = 0, Rtti_Sprite = 1, Rtti_PolygonalItem = 2, Rtti_Text = 3, Rtti_Polygon = 4, Rtti_Rectangle = 5, Rtti_Ellipse = 6, Rtti_Line = 7, Rtti_Spline = 8 }

virtual int rtti () const

virtual QRect boundingRect () const = 0

virtual QRect boundingRectAdvanced () const

QCanvas * canvas () const

Protected Members

void update ()

Description

The QCanvasItem class provides an abstract graphic object on a QCanvas.

A variety of QCanvasItem subclasses provide immediately usable behaviour. This class is a pure abstract superclass providing the behaviour that is shared among all the concrete canvas item classes. QCanvasItem is not intended for direct subclassing. It is much easier to subclass one of its subclasses, e.g. QCanvasPolygonalItem (the commonest base class), QCanvasRectangle, QCanvasSprite, QCanvasEllipse or QCanvasText.

Canvas items are added to a canvas by constructing them and passing the canvas to the canvas item's constructor. An item can be moved to a different canvas using setCanvas().

Items appear on the canvas after their show() function has been called (or setVisible(TRUE)), and after update() has been called. The canvas only shows items that are visible, and then only if update() is called. If you created the canvas without passing a width and height to the constructor you'll also need to call resize(). Since the canvas background defaults to white and canvas items default to white, you may need to change colors to see your items.

A QCanvasItem object can be moved in the x(), y() and z() dimensions using functions such as move(), moveBy(), setX(), setY() and setZ(). A canvas item can be set in motion, `animated', using setAnimated() and given a velocity in the x and y directions with setXVelocity() and setYVelocity() -- the same effect can be achieved by calling setVelocity(). Use the collidesWith() function to see if the canvas item will collide on the next advance(1) and use collisions() to see what collisions have occurred.

Use QCanvasSprite or your own subclass of QCanvasSprite to create canvas items which are animated, i.e. which change over time.

The size of a canvas item is given by boundingRect(). Use boundingRectAdvanced() to see what the size of the canvas item will be after the next advance(1) call.

The rtti() function is used for identifying subclasses of QCanvasItem. The canvas() function returns a pointer to the canvas which contains the canvas item.

QCanvasItem provides the show() and isVisible() functions like those in QWidget.

QCanvasItem also provides the setEnabled(), setActive() and setSelected() functions; these functions set the relevant boolean and cause a repaint but the boolean values they set are not used in QCanvasItem itself. You can make use of these booleans in your subclasses.

By default, canvas items have no velocity, no size, and are not in motion. The subclasses provided in Qt do not change these defaults except where noted.

See also Graphics Classes and Image Processing Classes.

Member Type Documentation

QCanvasItem::RttiValues

This enum is used to name the different types of canvas item.

QCanvasItem::Rtti_Item - Canvas item abstract base class

QCanvasItem::Rtti_Ellipse

QCanvasItem::Rtti_Line

QCanvasItem::Rtti_Polygon

QCanvasItem::Rtti_PolygonalItem

QCanvasItem::Rtti_Rectangle

QCanvasItem::Rtti_Spline

QCanvasItem::Rtti_Sprite

QCanvasItem::Rtti_Text

QCanvasItem::QCanvasItem ( QCanvas * canvas )

Constructs a QCanvasItem on canvas canvas.

See also setCanvas().

QCanvasItem::~QCanvasItem () [virtual]

Destroys the QCanvasItem and removes it from its canvas.

bool QCanvasItem::active () const

This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.

Use isActive() instead.

void QCanvasItem::advance ( int phase ) [virtual]

The default implementation moves the canvas item, if it is animated(), by the preset velocity if phase is 1, and does nothing if phase is 0.

Note that if you reimplement this function, the reimplementation must not change the canvas in any way, for example it must not add or remove items.

See also QCanvas::advance() and setVelocity().

Example: canvas/canvas.cpp.

Reimplemented in QCanvasSprite.

bool QCanvasItem::animated () const

Returns TRUE if the canvas item is in motion; otherwise returns FALSE.

See also setVelocity() and setAnimated().

QRect QCanvasItem::boundingRect () const [pure virtual]

Returns the bounding rectangle in pixels that the canvas item covers.

See also boundingRectAdvanced().

Reimplemented in QCanvasSprite, QCanvasPolygonalItem, and QCanvasText.

QRect QCanvasItem::boundingRectAdvanced () const [virtual]

Returns the bounding rectangle of pixels that the canvas item will cover after advance(1) is called.

See also boundingRect().

QCanvas * QCanvasItem::canvas () const

Returns the canvas containing the canvas item.

bool QCanvasItem::collidesWith ( const QCanvasItem * other ) const [pure virtual]

Returns TRUE if the canvas item will collide with the other item after they have moved by their current velocities; otherwise returns FALSE.

See also collisions().

Example: canvas/canvas.cpp.

QCanvasItemList QCanvasItem::collisions ( bool exact ) const

Returns the list of canvas items that this canvas item has collided with.

A collision is generally defined as occurring when the pixels of one item draw on the pixels of another item, but not all subclasses are so precise. Also, since pixel-wise collision detection can be slow, this function works in either exact or inexact mode, according to the exact parameter.

If exact is TRUE, the canvas items returned have been accurately tested for collision with the canvas item.

If exact is FALSE, the canvas items returned are near the canvas item. You can test the canvas items returned using collidesWith() if any are interesting collision candidates. By using this approach, you can ignore some canvas items for which collisions are not relevant.

The returned list is a list of QCanvasItems, but often you will need to cast the items to their subclass types. The safe way to do this is to use rtti() before casting. This provides some of the functionality of the standard C++ dynamic cast operation even on compilers where dynamic casts are not available.

Note that a canvas item may be `on' a canvas, e.g. it was created with the canvas as parameter, even though its coordinates place it beyond the edge of the canvas's area. Collision detection only works for canvas items which are wholly or partly within the canvas's area.

Note that if items have a velocity (see setVelocity()), then collision testing is done based on where the item will be when it moves, not its current location. For example, a "ball" item doesn't need to actually embed into a "wall" item before a collision is detected. For items without velocity, plain intersection is used.

void QCanvasItem::draw ( QPainter & painter ) [pure virtual]

This abstract virtual function draws the canvas item using painter.

Warning: When you reimplement this function, make sure that you leave the painter in the same state as you found it. For example, if you start by calling QPainter::translate(50, 50), end your code by calling QPainter::translate(-50, -50). Be also aware that the painter might already have some transformations set (i.e., don't call QPainter::resetXForm() when you're done).

Reimplemented in QCanvasSprite, QCanvasPolygonalItem, and QCanvasText.

bool QCanvasItem::enabled () const

This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.

Use isEnabled() instead.

void QCanvasItem::hide ()

Shorthand for setVisible(FALSE).

bool QCanvasItem::isActive () const

Returns TRUE if the QCanvasItem is active; otherwise returns FALSE.

bool QCanvasItem::isEnabled () const

Returns TRUE if the QCanvasItem is enabled; otherwise returns FALSE.

bool QCanvasItem::isSelected () const

Returns TRUE if the canvas item is selected; otherwise returns FALSE.

bool QCanvasItem::isVisible () const

Returns TRUE if the canvas item is visible; otherwise returns FALSE.

Note that in this context TRUE does not mean that the canvas item is currently in a view, merely that if a view is showing the area where the canvas item is positioned, and the item is not obscured by items with higher z values, and the view is not obscured by overlaying windows, it would be visible.

See also setVisible() and z().

void QCanvasItem::move ( double x, double y )

Moves the canvas item to the absolute position (x, y).

Example: canvas/canvas.cpp.

void QCanvasItem::moveBy ( double dx, double dy ) [virtual]

Moves the canvas item relative to its current position by (dx, dy).

Example: canvas/canvas.cpp.

int QCanvasItem::rtti () const [virtual]

Returns 0 (QCanvasItem::Rtti_Item).

Make your derived classes return their own values for rtti(), so that you can distinguish between objects returned by QCanvas::at(). You should use values greater than 1000 to allow for extensions to this class.

Overuse of this functionality can damage it's extensibility. For example, once you have identified a base class of a QCanvasItem found by QCanvas::at(), cast it to that type and call meaningful methods rather than acting upon the object based on its rtti value.

For example:

QCanvasItem* item;

// Find an item, e.g. with QCanvasItem::collisions().

...

if (item->rtti() == MySprite::RTTI ) {

    MySprite* s = (MySprite*)item;

    if (s->isDamagable()) s->loseHitPoints(1000);

    if (s->isHot()) myself->loseHitPoints(1000);

    ...

}

Example: canvas/canvas.cpp.

Reimplemented in QCanvasSprite, QCanvasPolygonalItem, and QCanvasText.

bool QCanvasItem::selected () const

This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.

Use isSelected() instead.

void QCanvasItem::setActive ( bool yes ) [virtual]

Sets the active flag of the item to yes. If this changes the item's active state the item will be redrawn when QCanvas::update() is next called.

The QCanvas, QCanvasItem and the Qt-supplied QCanvasItem subclasses do not make use of this value. The setActive() function is supplied because many applications need it, but it is up to you how you use the isActive() value.

void QCanvasItem::setAnimated ( bool y ) [virtual]

Sets the canvas item to be in motion if y is TRUE, or not if y is FALSE. The speed and direction of the motion is set with setVelocity(), or with setXVelocity() and setYVelocity().

See also advance() and QCanvas::advance().

void QCanvasItem::setCanvas ( QCanvas * c ) [virtual]

Sets the QCanvas upon which the canvas item is to be drawn to c.

See also canvas().

void QCanvasItem::setEnabled ( bool yes ) [virtual]

Sets the enabled flag of the item to yes. If this changes the item's enabled state the item will be redrawn when QCanvas::update() is next called.

The QCanvas, QCanvasItem and the Qt-supplied QCanvasItem subclasses do not make use of this value. The setEnabled() function is supplied because many applications need it, but it is up to you how you use the isEnabled() value.

void QCanvasItem::setSelected ( bool yes ) [virtual]

Sets the selected flag of the item to yes. If this changes the item's selected state the item will be redrawn when QCanvas::update() is next called.

The QCanvas, QCanvasItem and the Qt-supplied QCanvasItem subclasses do not make use of this value. The setSelected() function is supplied because many applications need it, but it is up to you how you use the isSelected() value.

void QCanvasItem::setVelocity ( double vx, double vy ) [virtual]

Sets the canvas item to be in motion, moving by vx and vy pixels in the horizontal and vertical directions respectively.

See also advance(), setXVelocity(), and setYVelocity().

void QCanvasItem::setVisible ( bool yes ) [virtual]

Makes the canvas item visible if yes is TRUE, or invisible if yes is FALSE. The change takes effect when QCanvas::update() is next called.

void QCanvasItem::setX ( double x )

Moves the canvas item so that its x-position is x.

See also x() and move().

Example: chart/chartform_canvas.cpp.

void QCanvasItem::setXVelocity ( double vx )

Sets the horizontal component of the canvas item's velocity to vx.

See also setYVelocity() and setVelocity().

void QCanvasItem::setY ( double y )

Moves the canvas item so that its y-position is y.

See also y() and move().

Example: chart/chartform_canvas.cpp.

void QCanvasItem::setYVelocity ( double vy )

Sets the vertical component of the canvas item's velocity to vy.

See also setXVelocity() and setVelocity().

void QCanvasItem::setZ ( double z )

Sets the z index of the canvas item to z. Higher-z items obscure (are in front of) lower-z items.

See also z() and move().

Examples:

void QCanvasItem::show ()

Shorthand for setVisible(TRUE).

Examples:

void QCanvasItem::update () [protected]

Call this function to repaint the canvas's changed chunks.

bool QCanvasItem::visible () const

This function is obsolete. It is provided to keep old source working. We strongly advise against using it in new code.

Use isVisible() instead.

double QCanvasItem::x () const

Returns the horizontal position of the canvas item. Note that subclasses often have an origin other than the top-left corner.

Example: canvas/canvas.cpp.

double QCanvasItem::xVelocity () const

Returns the horizontal velocity component of the canvas item.

double QCanvasItem::y () const

Returns the vertical position of the canvas item. Note that subclasses often have an origin other than the top-left corner.

Example: canvas/canvas.cpp.

double QCanvasItem::yVelocity () const

Returns the vertical velocity component of the canvas item.

double QCanvasItem::z () const

Returns the z index of the canvas item, which is used for visual order: higher-z items obscure (are in front of) lower-z items.

See Also

http://doc.trolltech.com/qcanvasitem.ht… http://www.trolltech.com/faq/tech.html

Author

Generated automatically from the source code.

Bugs

If you find a bug in Qt, please report it as described in http://doc.trolltech.com/bughowto.html. Good bug reports help us to help you. Thank you.

The definitive Qt documentation is provided in HTML format; it is located at $QTDIR/doc/html and can be read using Qt Assistant or with a web browser. This man page is provided as a convenience for those users who prefer man pages, although this format is not officially supported by Trolltech.

If you find errors in this manual page, please report them to qt-bugs@trolltech.com. Please include the name of the manual page (qcanvasitem.3qt) and the Qt version (3.3.8).

Referenced By

QCanvasItem.3qt(3) is an alias of qcanvasitem.3qt(3).

2 February 2007 Trolltech AS