pcre - Man Page

Perl-compatible regular expressions (original API)

Please Take Note

This document relates to PCRE releases that use the original API, with library names libpcre, libpcre16, and libpcre32. January 2015 saw the first release of a new API, known as PCRE2, with release numbers starting at 10.00 and library names libpcre2-8, libpcre2-16, and libpcre2-32. The old libraries (now called PCRE1) are now at end of life, and 8.45 is the final release. New projects are advised to use the new PCRE2 libraries.

Introduction

The PCRE library is a set of functions that implement regular expression pattern matching using the same syntax and semantics as Perl, with just a few differences. Some features that appeared in Python and PCRE before they appeared in Perl are also available using the Python syntax, there is some support for one or two .NET and Oniguruma syntax items, and there is an option for requesting some minor changes that give better JavaScript compatibility.

Starting with release 8.30, it is possible to compile two separate PCRE libraries: the original, which supports 8-bit character strings (including UTF-8 strings), and a second library that supports 16-bit character strings (including UTF-16 strings). The build process allows either one or both to be built. The majority of the work to make this possible was done by Zoltan Herczeg.

Starting with release 8.32 it is possible to compile a third separate PCRE library that supports 32-bit character strings (including UTF-32 strings). The build process allows any combination of the 8-, 16- and 32-bit libraries. The work to make this possible was done by Christian Persch.

The three libraries contain identical sets of functions, except that the names in the 16-bit library start with pcre16_ instead of pcre_, and the names in the 32-bit library start with pcre32_ instead of pcre_. To avoid over-complication and reduce the documentation maintenance load, most of the documentation describes the 8-bit library, with the differences for the 16-bit and 32-bit libraries described separately in the pcre16 and pcre32 pages. References to functions or structures of the form pcre[16|32]_xxx should be read as meaning "pcre_xxx when using the 8-bit library, pcre16_xxx when using the 16-bit library, or pcre32_xxx when using the 32-bit library".

The current implementation of PCRE corresponds approximately with Perl 5.12, including support for UTF-8/16/32 encoded strings and Unicode general category properties. However, UTF-8/16/32 and Unicode support has to be explicitly enabled; it is not the default. The Unicode tables correspond to Unicode release 6.3.0.

In addition to the Perl-compatible matching function, PCRE contains an alternative function that matches the same compiled patterns in a different way. In certain circumstances, the alternative function has some advantages. For a discussion of the two matching algorithms, see the pcrematching page.

PCRE is written in C and released as a C library. A number of people have written wrappers and interfaces of various kinds. In particular, Google Inc. have provided a comprehensive C++ wrapper for the 8-bit library. This is now included as part of the PCRE distribution. The pcrecpp page has details of this interface. Other people's contributions can be found in the Contrib directory at the primary FTP site, which is:

ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre

Details of exactly which Perl regular expression features are and are not supported by PCRE are given in separate documents. See the pcrepattern and pcrecompat pages. There is a syntax summary in the pcresyntax page.

Some features of PCRE can be included, excluded, or changed when the library is built. The pcre_config() function makes it possible for a client to discover which features are available. The features themselves are described in the pcrebuild page. Documentation about building PCRE for various operating systems can be found in the README and NON-AUTOTOOLS_BUILD files in the source distribution.

The libraries contains a number of undocumented internal functions and data tables that are used by more than one of the exported external functions, but which are not intended for use by external callers. Their names all begin with "_pcre_" or "_pcre16_" or "_pcre32_", which hopefully will not provoke any name clashes. In some environments, it is possible to control which external symbols are exported when a shared library is built, and in these cases the undocumented symbols are not exported.

Security Considerations

If you are using PCRE in a non-UTF application that permits users to supply arbitrary patterns for compilation, you should be aware of a feature that allows users to turn on UTF support from within a pattern, provided that PCRE was built with UTF support. For example, an 8-bit pattern that begins with "(*UTF8)" or "(*UTF)" turns on UTF-8 mode, which interprets patterns and subjects as strings of UTF-8 characters instead of individual 8-bit characters. This causes both the pattern and any data against which it is matched to be checked for UTF-8 validity. If the data string is very long, such a check might use sufficiently many resources as to cause your application to lose performance.

One way of guarding against this possibility is to use the pcre_fullinfo() function to check the compiled pattern's options for UTF. Alternatively, from release 8.33, you can set the PCRE_NEVER_UTF option at compile time. This causes a compile time error if a pattern contains a UTF-setting sequence.

If your application is one that supports UTF, be aware that validity checking can take time. If the same data string is to be matched many times, you can use the PCRE_NO_UTF[8|16|32]_CHECK option for the second and subsequent matches to save redundant checks.

Another way that performance can be hit is by running a pattern that has a very large search tree against a string that will never match. Nested unlimited repeats in a pattern are a common example. PCRE provides some protection against this: see the PCRE_EXTRA_MATCH_LIMIT feature in the pcreapi page.

User Documentation

The user documentation for PCRE comprises a number of different sections. In the "man" format, each of these is a separate "man page". In the HTML format, each is a separate page, linked from the index page. In the plain text format, the descriptions of the pcregrep and pcretest programs are in files called pcregrep.txt and pcretest.txt, respectively. The remaining sections, except for the pcredemo section (which is a program listing), are concatenated in pcre.txt, for ease of searching. The sections are as follows:

 pcre              this document
 pcre-config       show PCRE installation configuration information
 pcre16            details of the 16-bit library
 pcre32            details of the 32-bit library
 pcreapi           details of PCRE's native C API
 pcrebuild         building PCRE
 pcrecallout       details of the callout feature
 pcrecompat        discussion of Perl compatibility
 pcrecpp           details of the C++ wrapper for the 8-bit library
 pcredemo          a demonstration C program that uses PCRE
 pcregrep          description of the pcregrep command (8-bit only)
 pcrejit           discussion of the just-in-time optimization support
 pcrelimits        details of size and other limits
 pcrematching      discussion of the two matching algorithms
 pcrepartial       details of the partial matching facility
 pcrepattern       syntax and semantics of supported
                     regular expressions
 pcreperform       discussion of performance issues
 pcreposix         the POSIX-compatible C API for the 8-bit library
 pcreprecompile    details of saving and re-using precompiled patterns
 pcresample        discussion of the pcredemo program
 pcrestack         discussion of stack usage
 pcresyntax        quick syntax reference
 pcretest          description of the pcretest testing command
 pcreunicode       discussion of Unicode and UTF-8/16/32 support

In the "man" and HTML formats, there is also a short page for each C library function, listing its arguments and results.

Author

Philip Hazel
University Computing Service
Cambridge CB2 3QH, England.

Putting an actual email address here seems to have been a spam magnet, so I've taken it away. If you want to email me, use my two initials, followed by the two digits 10, at the domain cam.ac.uk.

Revision

Last updated: 14 June 2021
Copyright (c) 1997-2021 University of Cambridge.

Referenced By

gd_match_entries(3), mu-cfind(1), mu-easy(7), mu-extract(1), mu-init(1), mu-query(7), pads(8), pcre-config(1), pcrepattern(3), pcresyntax(3), pcretest(1), pdfgrep(1), sefcontext_compile(8), tin(1), tin(5), vcl(7), xgrep(1).

14 June 2021 PCRE 8.45