gluBuild3DMipmapLevels.3G - Man Page

builds a subset of three-dimensional mipmap levels

C Specification

GLint gluBuild3DMipmapLevels( GLenum target,

	GLint internalFormat,
	GLsizei width,
	GLsizei height,
	GLsizei depth,
	GLenum format,
	GLenum type,
	GLint level,
	GLint base,
	GLint max,
	const void *data )

Parameters

target

Specifies the target texture.  Must be GL_TEXTURE_3D.

internalFormat

Requests the internal storage  of the texture image.  The most current version of the SGI implementation of GLU does not check this value for validity before passing it on to the underlying OpenGL implementation.  A value that is not accepted by the OpenGL implementation will lead to an OpenGL error.  The benefit of not checking this value at the GLU level is that OpenGL extensions can add new internal texture formats without requiring a revision of the GLU implementation.  Older implementations of GLU check this value and raise a GLU error if it is not 1, 2, 3, or 4 or one of the following symbolic constants: GL_ALPHA, GL_ALPHA4, GL_ALPHA8, GL_ALPHA12, GL_ALPHA16, GL_LUMINANCE, GL_LUMINANCE4, GL_LUMINANCE8, GL_LUMINANCE12, GL_LUMINANCE16, GL_LUMINANCE_ALPHA, GL_LUMINANCE4_ALPHA4, GL_LUMINANCE6_ALPHA2, GL_LUMINANCE8_ALPHA8, GL_LUMINANCE12_ALPHA4, GL_LUMINANCE12_ALPHA12, GL_LUMINANCE16_ALPHA16, GL_INTENSITY, GL_INTENSITY4, GL_INTENSITY8, GL_INTENSITY12, GL_INTENSITY16, GL_RGB, GL_R3_G3_B2, GL_RGB4, GL_RGB5, GL_RGB8, GL_RGB10, GL_RGB12, GL_RGB16, GL_RGBA, GL_RGBA2, GL_RGBA4, GL_RGB5_A1, GL_RGBA8, GL_RGB10_A2, GL_RGBA12, or GL_RGBA16.

width,  height,  depth

Specifies in pixels the width, height and depth respectively, of the texture image. These should be a power of 2.

format

Specifies the  of the pixel data. Must be one of GL_COLOR_INDEX, GL_DEPTH_COMPONENT, GL_RED, GL_GREEN, GL_BLUE, GL_ALPHA, GL_RGB, GL_RGBA, GL_BGR, GL_BGRA, GL_LUMINANCE, or GL_LUMINANCE_ALPHA.

type

Specifies the data type for data. Must be one of GL_UNSIGNED_BYTE, GL_BYTE, GL_BITMAP, GL_UNSIGNED_SHORT, GL_SHORT, GL_UNSIGNED_INT, GL_INT,  GL_FLOAT,  GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, or GL_UNSIGNED_INT_2_10_10_10_REV.

level

Specifies the mipmap level of the image data.

base

Specifies the minimum mipmap level to pass to glTexImage3D.

max

Specifies the maximum mipmap level to pass to glTexImage3D.

data

Specifies a pointer to the image data in memory.

Description

gluBuild3DMipmapLevels builds a subset of prefiltered three-dimensional texture maps of decreasing resolutions called a mipmap. This is used for the antialiasing of texture mapped primitives.

A return value of zero indicates success, otherwise a GLU error code is returned (see gluErrorString).

A series of mipmap levels from base to max is built by decimating data in half along both dimensions until size 1×1×1 is reached. At each level, each texel in the halved mipmap level is an average of the corresponding eight texels in the larger mipmap level. (If exactly one of the dimensions is 1, four texels are averaged.  If exactly two of the dimensions are 1, two texels are averaged.)  glTexImage3D is called to load these mipmap levels from base to max. If max is larger than the highest mipmap level for the texture of the specified size, then a GLU error code is returned (see gluErrorString) and nothing is loaded.

For example, if level is 2 and width is 16, height is 8 and depth is 4, the following levels are possible: 16×8×4, 8×4×2, 4×2×1, 2×1×1, 1×1×1. These correspond to levels 2 through 6 respectively.  If base is 3 and max is 5, then only mipmap levels 8×4×2, 4×2×1 and 2×1×1 are loaded. However, if max is 7 then an error is returned and nothing is loaded, since max is larger than the highest mipmap level which is, in this case, 6.

The highest mipmap level can be derived from the formula log2(max(width,height,depth) 2level).

See the glTexImage1D reference page for a description of the acceptable values for format parameter. See the glDrawPixels  reference page for a description of the acceptable values  for type parameter.

Notes

gluBuild3DMipmapLevels is only available if the GLU version is 1.3 or greater.

Formats GL_BGR, and GL_BGRA, and types  GL_UNSIGNED_BYTE_3_3_2, GL_UNSIGNED_BYTE_2_3_3_REV, GL_UNSIGNED_SHORT_5_6_5, GL_UNSIGNED_SHORT_5_6_5_REV, GL_UNSIGNED_SHORT_4_4_4_4, GL_UNSIGNED_SHORT_4_4_4_4_REV, GL_UNSIGNED_SHORT_5_5_5_1, GL_UNSIGNED_SHORT_1_5_5_5_REV, GL_UNSIGNED_INT_8_8_8_8, GL_UNSIGNED_INT_8_8_8_8_REV, GL_UNSIGNED_INT_10_10_10_2, and GL_UNSIGNED_INT_2_10_10_10_REV are only available if the GL version  is 1.2 or greater.

Errors

GLU_INVALID_VALUE is returned if level > base, base < 0, max < base or max is > the highest mipmap level for data.

GLU_INVALID_VALUE is returned if width, height, or depth is < 1.

GLU_INVALID_ENUM is returned if internalFormat, format, or type is not  legal.

GLU_INVALID_OPERATION is returned if type is GL_UNSIGNED_BYTE_3_3_2 or GL_UNSIGNED_BYTE_2_3_3_REV and format is not GL_RGB.

GLU_INVALID_OPERATION is returned if type is GL_UNSIGNED_SHORT_5_6_5 or GL_UNSIGNED_SHORT_5_6_5_REV and format is not GL_RGB.

GLU_INVALID_OPERATION is returned if type is GL_UNSIGNED_SHORT_4_4_4_4 or GL_UNSIGNED_SHORT_4_4_4_4_REV and format is neither GL_RGBA nor GL_BGRA.

GLU_INVALID_OPERATION is returned if type is GL_UNSIGNED_SHORT_5_5_5_1 or GL_UNSIGNED_SHORT_1_5_5_5_REV and format is neither GL_RGBA nor GL_BGRA.

GLU_INVALID_OPERATION is returned if type is GL_UNSIGNED_INT_8_8_8_8 or GL_UNSIGNED_INT_8_8_8_8_REV and format is neither GL_RGBA nor GL_BGRA.

GLU_INVALID_OPERATION is returned if type is GL_UNSIGNED_INT_10_10_10_2 or GL_UNSIGNED_INT_2_10_10_10_REV and format is neither GL_RGBA nor GL_BGRA.

See Also

glDrawPixels(3G), glTexImage1D(3G), glTexImage2D(3G),  glTexImage3D(3G), gluBuild1DMipmaps(3G), gluBuild2DMipmaps(3G), gluBuild3DMipmaps(3G),  gluErrorString(3G),  glGetTexImage(3G), glGetTexLevelParameter(3G), gluBuild1DMipmapLevels(3G), gluBuild2DMipmapLevels(3G)

Referenced By

gluBuild1DMipmapLevels.3G(3), gluBuild1DMipmaps.3G(3), gluBuild2DMipmapLevels.3G(3), gluBuild2DMipmaps.3G(3), gluBuild3DMipmaps.3G(3).