X509_STORE_CTX_get_error.3ossl - Man Page
get or set certificate verification status information
#include <openssl/x509.h> int X509_STORE_CTX_get_error(const X509_STORE_CTX *ctx); void X509_STORE_CTX_set_error(X509_STORE_CTX *ctx, int s); int X509_STORE_CTX_get_error_depth(const X509_STORE_CTX *ctx); void X509_STORE_CTX_set_error_depth(X509_STORE_CTX *ctx, int depth); X509 *X509_STORE_CTX_get_current_cert(const X509_STORE_CTX *ctx); void X509_STORE_CTX_set_current_cert(X509_STORE_CTX *ctx, X509 *x); X509 *X509_STORE_CTX_get0_cert(const X509_STORE_CTX *ctx); STACK_OF(X509) *X509_STORE_CTX_get1_chain(const X509_STORE_CTX *ctx); const char *X509_verify_cert_error_string(long n);
These functions are typically called after certificate or chain verification using X509_verify_cert(3) or X509_STORE_CTX_verify(3) has indicated an error or in a verification callback to determine the nature of an error.
X509_STORE_CTX_get_error() returns the error code of ctx. See the "Error Codes" section for a full description of all error codes. It may return a code != X509_V_OK even if X509_verify_cert() did not indicate an error, likely because a verification callback function has waived the error.
X509_STORE_CTX_set_error() sets the error code of ctx to s. For example it might be used in a verification callback to set an error based on additional checks.
X509_STORE_CTX_get_error_depth() returns the depth of the error. This is a nonnegative integer representing where in the certificate chain the error occurred. If it is zero it occurred in the end entity certificate, one if it is the certificate which signed the end entity certificate and so on.
X509_STORE_CTX_set_error_depth() sets the error depth. This can be used in combination with X509_STORE_CTX_set_error() to set the depth at which an error condition was detected.
X509_STORE_CTX_get_current_cert() returns the current certificate in ctx. If an error occurred, the current certificate will be the one that is most closely related to the error, or possibly NULL if no such certificate is relevant.
X509_STORE_CTX_set_current_cert() sets the certificate x in ctx which caused the error. This value is not intended to remain valid for very long, and remains owned by the caller. It may be examined by a verification callback invoked to handle each error encountered during chain verification and is no longer required after such a callback. If a callback wishes the save the certificate for use after it returns, it needs to increment its reference count via X509_up_ref(3). Once such a saved certificate is no longer needed it can be freed with X509_free(3).
X509_STORE_CTX_get0_cert() retrieves an internal pointer to the certificate being verified by the ctx.
X509_STORE_CTX_get1_chain() returns a complete validate chain if a previous verification is successful. Otherwise the returned chain may be incomplete or invalid. The returned chain persists after the ctx structure is freed. When it is no longer needed it should be free up using:
X509_verify_cert_error_string() returns a human readable error string for verification error n.
X509_STORE_CTX_get_error() returns X509_V_OK or an error code.
X509_STORE_CTX_get_error_depth() returns a nonnegative error depth.
X509_STORE_CTX_get_current_cert() returns the certificate which caused the error or NULL if no certificate is relevant to the error.
X509_verify_cert_error_string() returns a human readable error string for verification error n.
A list of error codes and messages is shown below. Some of the error codes are defined but currently never returned: these are described as "unused".
- X509_V_OK: ok
The operation was successful.
- X509_V_ERR_UNSPECIFIED: unspecified certificate verification error
Unspecified error; should not happen.
- X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT: unable to get issuer certificate
The issuer certificate of a locally looked up certificate could not be found. This normally means the list of trusted certificates is not complete. To allow any certificate (not only a self-signed one) in the trust store to terminate the chain the X509_V_FLAG_PARTIAL_CHAIN flag may be set.
- X509_V_ERR_UNABLE_TO_GET_CRL: unable to get certificate CRL
The CRL of a certificate could not be found.
- X509_V_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE: unable to decrypt certificate's signature
The certificate signature could not be decrypted. This means that the actual signature value could not be determined rather than it not matching the expected value, this is only meaningful for RSA keys.
- X509_V_ERR_UNABLE_TO_DECRYPT_CRL_SIGNATURE: unable to decrypt CRL's signature
The CRL signature could not be decrypted: this means that the actual signature value could not be determined rather than it not matching the expected value. Unused.
- X509_V_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY: unable to decode issuer public key
The public key in the certificate
SubjectPublicKeyInfofield could not be read.
- X509_V_ERR_CERT_SIGNATURE_FAILURE: certificate signature failure
The signature of the certificate is invalid.
- X509_V_ERR_CRL_SIGNATURE_FAILURE: CRL signature failure
The signature of the CRL is invalid.
- X509_V_ERR_CERT_NOT_YET_VALID: certificate is not yet valid
The certificate is not yet valid: the
notBeforedate is after the current time.
- X509_V_ERR_CERT_HAS_EXPIRED: certificate has expired
The certificate has expired: that is the
notAfterdate is before the current time.
- X509_V_ERR_CRL_NOT_YET_VALID: CRL is not yet valid
The CRL is not yet valid.
- X509_V_ERR_CRL_HAS_EXPIRED: CRL has expired
The CRL has expired.
- X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD: format error in certificate's notBefore field
notBeforefield contains an invalid time.
- X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD: format error in certificate's notAfter field
notAfterfield contains an invalid time.
- X509_V_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD: format error in CRL's lastUpdate field
The CRL lastUpdate field contains an invalid time.
- X509_V_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD: format error in CRL's nextUpdate field
nextUpdatefield contains an invalid time.
- X509_V_ERR_OUT_OF_MEM: out of memory
An error occurred trying to allocate memory.
- X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT: self-signed certificate
The passed certificate is self-signed and the same certificate cannot be found in the list of trusted certificates.
- X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN: self-signed certificate in certificate chain
The certificate chain could be built up using the untrusted certificates but no suitable trust anchor (which typically is a self-signed root certificate) could be found in the trust store.
- X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY: unable to get local issuer certificate
The issuer certificate could not be found: this occurs if the issuer certificate of an untrusted certificate cannot be found.
- X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE: unable to verify the first certificate
No signatures could be verified because the chain contains only one certificate and it is not self-signed and the X509_V_FLAG_PARTIAL_CHAIN flag is not set.
- X509_V_ERR_CERT_CHAIN_TOO_LONG: certificate chain too long
The certificate chain length is greater than the supplied maximum depth.
- X509_V_ERR_CERT_REVOKED: certificate revoked
The certificate has been revoked.
- X509_V_ERR_INVALID_CA: invalid CA certificate
A CA certificate is invalid. Either it is not a CA or its extensions are not consistent with the supplied purpose.
- X509_V_ERR_PATH_LENGTH_EXCEEDED: path length constraint exceeded
The basicConstraints path-length parameter has been exceeded.
- X509_V_ERR_INVALID_PURPOSE: unsuitable certificate purpose
The target certificate cannot be used for the specified purpose.
- X509_V_ERR_CERT_UNTRUSTED: certificate not trusted
The root CA is not marked as trusted for the specified purpose.
- X509_V_ERR_CERT_REJECTED: certificate rejected
The root CA is marked to reject the specified purpose.
- X509_V_ERR_SUBJECT_ISSUER_MISMATCH: subject issuer mismatch
The current candidate issuer certificate was rejected because its subject name did not match the issuer name of the current certificate.
- X509_V_ERR_AKID_SKID_MISMATCH: authority and subject key identifier mismatch
The current candidate issuer certificate was rejected because its subject key identifier was present and did not match the authority key identifier current certificate.
- X509_V_ERR_AKID_ISSUER_SERIAL_MISMATCH: authority and issuer serial number mismatch
The current candidate issuer certificate was rejected because its issuer name and serial number was present and did not match the authority key identifier of the current certificate.
- X509_V_ERR_KEYUSAGE_NO_CERTSIGN: key usage does not include certificate signing
The current candidate issuer certificate was rejected because its
keyUsageextension does not permit certificate signing.
- X509_V_ERR_INVALID_EXTENSION: invalid or inconsistent certificate extension
A certificate extension had an invalid value (for example an incorrect encoding) or some value inconsistent with other extensions.
- X509_V_ERR_INVALID_POLICY_EXTENSION: invalid or inconsistent certificate policy extension
A certificate policies extension had an invalid value (for example an incorrect encoding) or some value inconsistent with other extensions. This error only occurs if policy processing is enabled.
- X509_V_ERR_NO_EXPLICIT_POLICY: no explicit policy
The verification flags were set to require and explicit policy but none was present.
- X509_V_ERR_DIFFERENT_CRL_SCOPE: different CRL scope
The only CRLs that could be found did not match the scope of the certificate.
- X509_V_ERR_UNSUPPORTED_EXTENSION_FEATURE: Unsupported extension feature
Some feature of a certificate extension is not supported. Unused.
- X509_V_ERR_PERMITTED_VIOLATION: permitted subtree violation
A name constraint violation occurred in the permitted subtrees.
- X509_V_ERR_EXCLUDED_VIOLATION: excluded subtree violation
A name constraint violation occurred in the excluded subtrees.
- X509_V_ERR_SUBTREE_MINMAX: name constraints minimum and maximum not supported
A certificate name constraints extension included a minimum or maximum field: this is not supported.
- X509_V_ERR_UNSUPPORTED_CONSTRAINT_TYPE: unsupported name constraint type
An unsupported name constraint type was encountered. OpenSSL currently only supports directory name, DNS name, email and URI types.
- X509_V_ERR_UNSUPPORTED_CONSTRAINT_SYNTAX: unsupported or invalid name constraint syntax
The format of the name constraint is not recognised: for example an email address format of a form not mentioned in RFC3280. This could be caused by a garbage extension or some new feature not currently supported.
- X509_V_ERR_CRL_PATH_VALIDATION_ERROR: CRL path validation error
An error occurred when attempting to verify the CRL path. This error can only happen if extended CRL checking is enabled.
- X509_V_ERR_APPLICATION_VERIFICATION: application verification failure
An application specific error. This will never be returned unless explicitly set by an application callback.
- X509_V_ERR_UNABLE_TO_GET_CRL_ISSUER: unable to get CRL issuer certificate
Unable to get CRL issuer certificate.
- X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION: unhandled critical extension
Unhandled critical extension.
- X509_V_ERR_KEYUSAGE_NO_CRL_SIGN: key usage does not include CRL signing
Key usage does not include CRL signing.
- X509_V_ERR_UNHANDLED_CRITICAL_CRL_EXTENSION: unhandled critical CRL extension
Unhandled critical CRL extension.
- X509_V_ERR_INVALID_NON_CA: invalid non-CA certificate (has CA markings)
Invalid non-CA certificate has CA markings.
- X509_V_ERR_PROXY_PATH_LENGTH_EXCEEDED: proxy path length constraint exceeded
Proxy path length constraint exceeded.
- X509_V_ERR_KEYUSAGE_NO_DIGITAL_SIGNATURE: key usage does not include digital signature
Key usage does not include digital signature, and therefore cannot sign certificates.
- X509_V_ERR_PROXY_CERTIFICATES_NOT_ALLOWED: proxy certificates not allowed, please set the appropriate flag
Proxy certificates not allowed unless the X509_V_FLAG_ALLOW_PROXY_CERTS flag is set.
- X509_V_ERR_UNNESTED_RESOURCE: RFC 3779 resource not subset of parent's resources
See RFC 3779 for details.
- X509_V_ERR_UNSUPPORTED_NAME_SYNTAX: unsupported or invalid name syntax
Unsupported or invalid name syntax.
- X509_V_ERR_PATH_LOOP: path loop
- X509_V_ERR_HOSTNAME_MISMATCH: hostname mismatch
- X509_V_ERR_EMAIL_MISMATCH: email address mismatch
Email address mismatch.
- X509_V_ERR_IP_ADDRESS_MISMATCH: IP address mismatch
IP address mismatch.
- X509_V_ERR_DANE_NO_MATCH: no matching DANE TLSA records
DANE TLSA authentication is enabled, but no TLSA records matched the certificate chain. This error is only possible in openssl-s_client(1).
- X509_V_ERR_EE_KEY_TOO_SMALL: EE certificate key too weak
EE certificate key too weak.
- X509_V_ERR_CA_KEY_TOO_SMALL: CA certificate key too weak
CA certificate key too weak.
- X509_V_ERR_CA_MD_TOO_WEAK: CA signature digest algorithm too weak
CA signature digest algorithm too weak.
- X509_V_ERR_INVALID_CALL: invalid certificate verification context
Invalid certificate verification context.
- X509_V_ERR_STORE_LOOKUP: issuer certificate lookup error
Issuer certificate lookup error.
- X509_V_ERR_NO_VALID_SCTS: certificate transparency required, but no valid SCTs found
Certificate Transparency required, but no valid SCTs found.
- X509_V_ERR_PROXY_SUBJECT_NAME_VIOLATION: proxy subject name violation
Proxy subject name violation.
- X509_V_ERR_OCSP_VERIFY_NEEDED: OCSP verification needed
Returned by the verify callback to indicate an OCSP verification is needed.
- X509_V_ERR_OCSP_VERIFY_FAILED: OCSP verification failed
Returned by the verify callback to indicate OCSP verification failed.
- X509_V_ERR_OCSP_CERT_UNKNOWN: OCSP unknown cert
Returned by the verify callback to indicate that the certificate is not recognized by the OCSP responder.
- X509_V_ERR_NO_ISSUER_PUBLIC_KEY: issuer certificate doesn't have a public key
The issuer certificate does not have a public key.
- X509_V_ERR_SIGNATURE_ALGORITHM_MISMATCH: subject signature algorithm and issuer public key algorithm mismatch
The issuer's public key is not of the type required by the signature in the subject's certificate.
The above functions should be used instead of directly referencing the fields in the X509_VERIFY_CTX structure.
In versions of OpenSSL before 1.0 the current certificate returned by X509_STORE_CTX_get_current_cert() was never NULL. Applications should check the return value before printing out any debugging information relating to the current certificate.
If an unrecognised error code is passed to X509_verify_cert_error_string() the numerical value of the unknown code is returned in a static buffer. This is not thread safe but will never happen unless an invalid code is passed.
Previous versions of this documentation swapped the meaning of the X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT and X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY error codes.
X509_verify_cert(3), X509_STORE_CTX_verify(3), X509_up_ref(3), X509_free(3).
Copyright 2009-2023 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>.
openssl-verify.1ossl(1), X509_STORE_CTX_set_verify_cb.3ossl(3), X509_verify_cert.3ossl(3).
The man pages X509_STORE_CTX_get0_cert.3ossl(3), X509_STORE_CTX_get1_chain.3ossl(3), X509_STORE_CTX_get_current_cert.3ossl(3), X509_STORE_CTX_get_error_depth.3ossl(3), X509_STORE_CTX_set_current_cert.3ossl(3), X509_STORE_CTX_set_error.3ossl(3), X509_STORE_CTX_set_error_depth.3ossl(3) and X509_verify_cert_error_string.3ossl(3) are aliases of X509_STORE_CTX_get_error.3ossl(3).