nvme_fw_commit_ca - Man Page

Firmware Commit — Commit Action

Synopsis

enum nvme_fw_commit_ca {
   NVME_FW_COMMIT_CA_REPLACE ,

   NVME_FW_COMMIT_CA_REPLACE_AND_ACTIVATE ,

   NVME_FW_COMMIT_CA_SET_ACTIVE ,

   NVME_FW_COMMIT_CA_REPLACE_AND_ACTIVATE_IMMEDIATE ,

   NVME_FW_COMMIT_CA_REPLACE_BOOT_PARTITION ,

   NVME_FW_COMMIT_CA_ACTIVATE_BOOT_PARTITION

};

Constants

NVME_FW_COMMIT_CA_REPLACE

Downloaded image replaces the existing image, if any, in the specified Firmware Slot. The newly placed image is not activated.

NVME_FW_COMMIT_CA_REPLACE_AND_ACTIVATE

Downloaded image replaces the existing image, if any, in the specified Firmware Slot. The newly placed image is activated at the next Controller Level Reset.

NVME_FW_COMMIT_CA_SET_ACTIVE

The existing image in the specified Firmware Slot is activated at the next Controller Level Reset.

NVME_FW_COMMIT_CA_REPLACE_AND_ACTIVATE_IMMEDIATE

Downloaded image replaces the existing image, if any, in the specified Firmware Slot and is then activated immediately. If there is not a newly downloaded image, then the existing image in the specified firmware slot is activated immediately.

NVME_FW_COMMIT_CA_REPLACE_BOOT_PARTITION

Downloaded image replaces the Boot Partition specified by the Boot Partition ID field.

NVME_FW_COMMIT_CA_ACTIVATE_BOOT_PARTITION

Mark the Boot Partition specified in the BPID field as active and update BPINFO.ABPID.

Info

enum nvme_fw_commit_ca August 2022 API Manual