Share a host directory tree with a guest through a virtio-fs device. This program is a vhost-user backend that implements the virtio-fs device. Each virtio-fs device instance requires its own virtiofsd process.
This program is designed to work with QEMU's --device vhost-user-fs-pci but should work with any virtual machine monitor (VMM) that supports vhost-user. See the Examples section below.
This program must be run as the root user. The program drops privileges where possible during startup although it must be able to create and access files with any uid/gid:
In "namespace" sandbox mode the program switches into a new file system namespace and invokes pivot_root(2) to make the shared directory tree its root. A new pid and net namespace is also created to isolate the process.
In "chroot" sandbox mode the program invokes chroot(2) to make the shared directory tree its root. This mode is intended for container environments where the container runtime has already set up the namespaces and the program does not have permission to create namespaces itself.
Both sandbox modes prevent "file system escapes" due to symlinks and other file system objects that might lead to files outside the shared directory.
- -h, --help
- -V, --version
Enable debug output.
Print log messages to syslog instead of stderr.
- -o OPTION
- debug - Enable debug output.
- flock|no_flock - Enable/disable flock. The default is no_flock.
- modcaps=CAPLIST Modify the list of capabilities allowed; CAPLIST is a colon separated list of capabilities, each preceded by either + or -, e.g. ''+sys_admin:-chown''.
- log_level=LEVEL - Print only log messages matching LEVEL or more severe. LEVEL is one of err, warn, info, or debug. The default is info.
- posix_lock|no_posix_lock - Enable/disable remote POSIX locks. The default is no_posix_lock.
- readdirplus|no_readdirplus - Enable/disable readdirplus. The default is readdirplus.
- sandbox=namespace|chroot - Sandbox mode: - namespace: Create mount, pid, and net namespaces and pivot_root(2) into the shared directory. - chroot: chroot(2) into shared directory (use in containers). The default is "namespace".
- source=PATH - Share host directory tree located at PATH. This option is required.
- timeout=TIMEOUT - I/O timeout in seconds. The default depends on cache= option.
- writeback|no_writeback - Enable/disable writeback cache. The cache allows the FUSE client to buffer and merge write requests. The default is no_writeback.
- xattr|no_xattr - Enable/disable extended attributes (xattr) on files and directories. The default is no_xattr.
Listen on vhost-user UNIX domain socket at PATH.
Set the vhost-user UNIX domain socket gid to GROUP.
Accept connections from vhost-user UNIX domain socket file descriptor FDNUM. The file descriptor must already be listening for connections.
Restrict the number of worker threads per request queue to NUM. The default is 64.
Select the desired trade-off between coherency and performance. none forbids the FUSE client from caching to achieve best coherency at the cost of performance. auto acts similar to NFS with a 1 second metadata cache timeout. always sets a long cache lifetime at the expense of coherency. The default is auto.
By default the name of xattr's used by the client are passed through to the server file system. This can be a problem where either those xattr names are used by something on the server (e.g. selinux client/server confusion) or if the virtiofsd is running in a container with restricted privileges where it cannot access some attributes.
A mapping of xattr names can be made using -o xattrmap=mapping where the mapping string consists of a series of rules.
The first matching rule terminates the mapping. The set of rules must include a terminating rule to match any remaining attributes at the end.
Each rule consists of a number of fields separated with a separator that is the first non-white space character in the rule. This separator must then be used for the whole rule. White space may be added before and after each rule.
Using ':' as the separator a rule is of the form:
- 'client' - match 'key' against a xattr name from the client for
- 'server' - match 'prepend' against a xattr name from the server
- 'all' - can be used to make a single rule where both the server
and client matches are triggered.
type is one of:
- 'prefix' - is designed to prepend and strip a prefix; the modified attributes then being passed on to the client/server.
- 'ok' - Causes the rule set to be terminated when a match is found while allowing matching xattr's through unchanged. It is intended both as a way of explicitly terminating the list of rules, and to allow some xattr's to skip following rules.
- 'bad' - If a client tries to use a name matching 'key' it's denied using EPERM; when the server passes an attribute name matching 'prepend' it's hidden. In many ways it's use is very like 'ok' as either an explicit terminator or for special handling of certain patterns.
key is a string tested as a prefix on an attribute name originating on the client. It maybe empty in which case a 'client' rule will always match on client names.
prepend is a string tested as a prefix on an attribute name originating on the server, and used as a new prefix. It may be empty in which case a 'server' rule will always match on all names from the server.
will match 'trusted.' attributes in client calls and prefix them before passing them to the server.
will strip 'user.virtiofs.' from all server replies.
combines the previous two cases into a single rule.
will allow get/set xattr for 'user.' xattr's and ignore following rules.
will pass 'securty.' xattr's in listxattr from the server and ignore following rules.
will terminate the rule search passing any remaining attributes in both directions.
would hide 'security.' xattr's in listxattr from the server.
A simpler 'map' type provides a shorter syntax for the common case:
The 'map' type adds a number of separate rules to add prepend as a prefix to the matched key (or all attributes if key is empty). There may be at most one 'map' rule and it must be the last rule in the set.
Note: When the 'security.capability' xattr is remapped, the daemon has to do extra work to remove it during many operations, which the host kernel normally does itself.
Prefix all attributes with 'user.virtiofs.'
This uses two rules, using : as the field separator; the first rule prefixes and strips 'user.virtiofs.', the second rule hides any non-prefixed attributes that the host set.
This is equivalent to the 'map' rule:
:: -o xattrmap=":map::user.virtiofs.:"
Prefix 'trusted.' attributes, allow others through
"/prefix/all/trusted./user.virtiofs./ /bad/server//trusted./ /bad/client/user.virtiofs.// /ok/all///"
Here there are four rules, using / as the field separator, and also demonstrating that new lines can be included between rules. The first rule is the prefixing of 'trusted.' and stripping of 'user.virtiofs.'. The second rule hides unprefixed 'trusted.' attributes on the host. The third rule stops a guest from explicitly setting the 'user.virtiofs.' path directly. Finally, the fourth rule lets all remaining attributes through.
This is equivalent to the 'map' rule:
:: -o xattrmap="/map/trusted./user.virtiofs./"
Hide 'security.' attributes, and allow everything else
The first rule combines what could be separate client and server rules into a single 'all' rule, matching 'security.' in either client arguments or lists returned from the host. This stops the client seeing any 'security.' attributes on the server and stops it setting any.
Export /var/lib/fs/vm001/ on vhost-user UNIX domain socket /var/run/vm001-vhost-fs.sock:
host# virtiofsd --socket-path=/var/run/vm001-vhost-fs.sock -o source=/var/lib/fs/vm001 host# qemu-system-x86_64 \ -chardev socket,id=char0,path=/var/run/vm001-vhost-fs.sock \ -device vhost-user-fs-pci,chardev=char0,tag=myfs \ -object memory-backend-memfd,id=mem,size=4G,share=on \ -numa node,memdev=mem \ ... guest# mount -t virtiofs myfs /mnt
Stefan Hajnoczi <firstname.lastname@example.org>, Masayoshi Mizuma <email@example.com>
2021, The QEMU Project Developers