usrp_x3xx_fpga_burner man page

usrp_x3xx_fpga_burner — USRP X-Series FPGA Burner

Description

Burn an FPGA image onto a connected USRP X-Series device. The program takes two main arguments. The first is either an IP address or an NI-RIO resource to decide the method of loading the FPGA image. The other is either the type of image to burn, in which case the program will choose the default image of that type and model, or a custom FPGA image path.

Synopsis

usrp_x3xx_fpga_burner [Options]

Options

Device IP Address:
--addr="Address"
Device NI-RIO Resource:
--resource="Resource"
RPC Port:
--rpc-port="Port" (default=5444)
Image Type (1G, HG, or XG):
--type="Type"
Custom FPGA path:
--fpga-path="Path"
Initialize USRP with image currently burned onto device (Ethernet only):
--configure
Verify image during Ethernet burn (takes longer):
--verify
List connected USRP X-Series devices:
--list
This help information:
--help

Examples

Burning a 1-Gigabit image over Ethernet

usrp_x3xx_fpga_burner --addr=192.168.10.2 --type=1G

Burning a Hybrid image over PCIe

usrp_x3xx_fpga_burner --resource=RIO0 --type=HG

Burning a custom FPGA image over Ethernet

usrp_x3xx_fpga_burner --addr=192.168.10.2 --fpga=path="custom_image.bit"

See Also

UHD documentation: http://files.ettus.com/manual/

GR-UHD documentation: http://gnuradio.org/doc/doxygen/page_uh…

Other UHD programs:

uhd_images_downloader(1) usrp2_card_burner(1) usrp_n2xx_simple_net_burner(1) octoclock_firmware_burner(1)

Author

This manual page was written by Nicholas Corgan for the Debian project (but may be used by others).

Referenced By

octoclock_firmware_burner(1), uhd_images_downloader(1), usrp2_card_burner(1), usrp_n2xx_simple_net_burner(1).

3.7.0 UHD User Commands