nvme-resv-acquire - Man Page

nvme resv-acquire <device> [--namespace-id=<nsid> | -n <nsid>]
                        [--crkey=<crkey> | -c <crkey>]
                        [--prkey=<prkey> | -p <prkey>]
                        [--rtype=<rtype> | -t <rtype>]
                        [--racqa=<racqa> | -a <racqa>] [--iekey | -i]
                        [--output-format=<fmt> | -o <fmt>] [--verbose | -v]

The Reservation Acquire command is used to acquire a reservation on a namespace, preempt a reservation held on a namespace, and abort a reservation held on a namespace.

-n <nsid>, --namespace-id=<nsid>

Override the nsid field. If using the admin character device, this parameter is required.

-c <crkey>, --crkey=<crkey>

Current Reservation Key: The field specifies the current reservation key associated with the host. If the IEKEY bit is set to ‘1’ in the command, then the CRKEY check succeeds regardless of the value in this field.

-p <prkey>, --prkey=<prkey>

Preempt Reservation Key: If the Reservation Acquire Action is set to 001b (i.e., Preempt) or 010b (i.e., Preempt and Abort), then this field specifies the reservation key to be unregistered from the namespace. For all other Reservation Acquire Action values, this field is reserved.

-t <rtype>, --rtype=<rtype>

Reservation Type: This field specifies the type of reservation to be created.

Value	Definition
0h	Reserved
1h	Write Exclusive Reservation
2h	Exclusive Access Reservation
3h	Write Exclusive - Registrants Only Reservation
4h	Exclusive Access - Registrants Only Reservation
5h	Write Exclusive - All Registrants Reservation
6h	Exclusive Access - All Registrants Reservation
07h-FFh	Reserved

-a <racqa>, --racqa=<racqa>

Reservation Acquire Action: This field specifies the action that is performed by the command.

Value	Definition
0	Acquire
1	Preempt
2	Preempt and Abort
3-7	Reserved

-i,  --iekey

Ignore Existing Key: If this bit is set to a 1, then the Current Reservation Key (CRKEY) check is disabled and the command shall succeed regardless of the CRKEY field value.

Indicator option, defaults to 0.

-o <fmt>, --output-format=<fmt>

Set the reporting format to normal, json or binary. Only one output format can be used at a time.

-v,  --verbose

Increase the information detail in the output.

No examples yet

Part of the nvme-user suite

nvme(1).