nvme-fdp-feature - Man Page

nvme fdp <device> [--endgrp-id=<NUM> | -e <NUM>]
                [--enable-conf-idx=<NUM> | -c <NUM>]
                [--disable | -d]
                [--verbose | -v]

For the NVMe device given, configure and manage the Flexible Data Placement (FDP) feature​.

This command can be used to either show the current FDP feature configuration or change it​.

 If no `--enable-conf-idx` or `--disable` options are provided, the current configuration is
displayed​.

If the --enable-conf-idx or --disable options are provided, configuration is changed accordingly​. Device may refuse the change if there is a namespace​.

The <device> parameter is mandatory and must be a NVMe character device (ex: /dev/nvme0)

-e <NUM>, --endgrp-id=<NUM>

Specify the endurance group ID​. This option is mandatory if device supports endurance groups​.

-c <NUM>, --enable-conf-idx=<NUM>

Enable FDP feature with the specified configuration​. The configuration index matches position listed by nvme-fdp-config(1)​.

-d,  --disable

Disable the current FDP feature configuration​.

-v,  --verbose

Increase verbosity of the output​.

nvme-list-endgrp(1) nvme-fdp-config(1)

Part of nvme-cli