mongodump man page

mongodump — MongoDB Data Dump Utility

TL;DR

mongodump

mongodump --out {{path/to/folder}}

mongodump --db {{database_name}}

mongodump --collection {{collection_name}} --db {{database_name}}

mongodump --host {{host}} --port {{port}}

mongodump --username {{username}} {{database}} --password

Synopsis

mongodump is a utility for creating a binary export of the contents of a database. Consider using this utility as part of an effective backup strategy. Use mongodump in conjunction with mongorestore to restore databases.

mongodump can read data from either mongod or mongos instances, in addition to reading directly from MongoDB data files without an active mongod.

SEE ALSO:

Behavior

mongodump does not dump the content of the local database.

The data format used by mongodump from version 2.2 or later is incompatible with earlier versions of mongod. Do not use recent versions of mongodump to back up older data stores.

When running mongodump against a mongos instance where the sharded cluster consists of replica sets, the read preference of the operation will prefer reads from secondary members of the set.

Changed in version 2.2: When used in combination with fsync or db.fsyncLock(), mongod will block reads, including those from mongodump, when queued write operation waits behind the fsync lock. Do not use mongodump with db.fsyncLock().

mongodump overwrites output files if they exist in the backup data folder. Before running the mongodump command multiple times, either ensure that you no longer need the files in the output folder (the default is the dump/ folder) or rename the folders or files.

Required Access

Backup Collections

To backup all the databases in a cluster via mongodump, you should have the backup role. The backup role provides the required privileges for backing up all databases. The role confers no additional access, in keeping with the policy of least privilege.

To backup a given database, you must have read access on the database. Several roles provide this access, including the backup role.

To backup the system.profile collection, which is created when you activate database profiling, you must have additional read access on this collection. Several roles provide this access, including the clusterAdmin and dbAdmin roles.

Backup Users

Changed in version 2.6.

To backup users and user-defined roles for a given database, you must have access to the admin database. MongoDB stores the user data and role definitions for all databases in the admin database.

Specifically, to backup a given database's users, you must have the find action on the admin database's admin.system.users collection. The backup and userAdminAnyDatabase roles both provide this privilege.

To backup the user-defined roles on a database, you must have the find action on the admin database's admin.system.roles collection. Both the backup and userAdminAnyDatabase roles provide this privilege.

Options

Changed in version 3.0.0: mongodump removed the --dbpath as well as related --directoryperdb and --journal options. You must use mongodump while connected to a mongod instance.

mongodump

mongodump

--help
Returns information on the options and use of mongodump.
--verbose, -v
Increases the amount of internal reporting returned on standard output or in log files. Increase the verbosity with the -v form by including the option multiple times, (e.g. -vvvvv.)
--quiet

Runs the mongodump in a quiet mode that attempts to limit the amount of output.

This option suppresses:

·
output from database commands
·
replication activity
·
connection accepted events
·
connection closed events
--version
Returns the mongodump release number.
--host <hostname><:port>, -h <hostname><:port>

Default: localhost:27017

Specifies a resolvable hostname for the mongod to which to connect. By default, the mongodump attempts to connect to a MongoDB instance running on the localhost on port number 27017.

To connect to a replica set, specify the replSetName and a seed list of set members, as in the following:

<replSetName>/<hostname1><:port>,<hostname2><:port>,<...>

You can always connect directly to a single MongoDB instance by specifying the host and port number directly.

Changed in version 3.0.0: If you use IPv6 and use the <address>:<port> format, you must enclose the portion of an address and port combination in brackets (e.g. [<address>]).

--port <port>
Default: 27017

Specifies the TCP port on which the MongoDB instance listens for client connections.
--ipv6
Enables IPv6 support and allows the mongodump to connect to the MongoDB instance using an IPv6 network. All MongoDB programs and processes disable IPv6 support by default.
--ssl

New in version 2.6.

Enables connection to a mongod or mongos that has SSL support enabled.

The default distribution of MongoDB does not contain support for SSL. For more information on MongoDB and SSL, see http://docs.mongodb.org/manual/tutorial….

--sslCAFile <filename>

New in version 2.6.

Specifies the .pem file that contains the root certificate chain from the Certificate Authority. Specify the file name of the .pem file using relative or absolute paths.

The default distribution of MongoDB does not contain support for SSL. For more information on MongoDB and SSL, see http://docs.mongodb.org/manual/tutorial….

WARNING:

If the mongo shell or any other tool that connects to mongos or mongod is run without --sslCAFile, it will not attempt to validate server certificates. This results in vulnerability to expired mongod and mongos certificates as well as to foreign processes posing as valid mongod or mongos instances. Ensure that you always specify the CA file against which server certificates should be validated in cases where intrusion is a possibility.

--sslPEMKeyFile <filename>

New in version 2.6.

Specifies the .pem file that contains both the SSL certificate and key. Specify the file name of the .pem file using relative or absolute paths.

This option is required when using the --ssl option to connect to a mongod or mongos that has CAFile enabled without allowConnectionsWithoutCertificates.

The default distribution of MongoDB does not contain support for SSL. For more information on MongoDB and SSL, see http://docs.mongodb.org/manual/tutorial….

--sslPEMKeyPassword <value>

New in version 2.6.

Specifies the password to de-crypt the certificate-key file (i.e. --sslPEMKeyFile). Use the --sslPEMKeyPassword option only if the certificate-key file is encrypted. In all cases, the mongodump will redact the password from all logging and reporting output.

If the private key in the PEM file is encrypted and you do not specify the --sslPEMKeyPassword option, the mongodump will prompt for a passphrase. See ssl-certificate-password.

The default distribution of MongoDB does not contain support for SSL. For more information on MongoDB and SSL, see http://docs.mongodb.org/manual/tutorial….

--sslCRLFile <filename>

New in version 2.6.

Specifies the .pem file that contains the Certificate Revocation List. Specify the file name of the .pem file using relative or absolute paths.

The default distribution of MongoDB does not contain support for SSL. For more information on MongoDB and SSL, see http://docs.mongodb.org/manual/tutorial….

--sslAllowInvalidCertificates

New in version 2.6.

Bypasses the validation checks for server certificates and allows the use of invalid certificates. When using the allowInvalidCertificates setting, MongoDB logs as a warning the use of the invalid certificate.

The default distribution of MongoDB does not contain support for SSL. For more information on MongoDB and SSL, see http://docs.mongodb.org/manual/tutorial….

--sslAllowInvalidHostnames

New in version 3.0.

Disables the validation of the hostnames in SSL certificates. Allows mongodump to connect to MongoDB instances if the hostname their certificates do not match the specified hostname.

--sslFIPSMode

New in version 2.6.

Directs the mongodump to use the FIPS mode of the installed OpenSSL library. Your system must have a FIPS compliant OpenSSL library to use the --sslFIPSMode option.

NOTE:

FIPS Compatible SSL is available only in MongoDB Enterprise. See http://docs.mongodb.org/manual/tutorial… for more information.

--username <username>, -u <username>
Specifies a username with which to authenticate to a MongoDB database that uses authentication. Use in conjunction with the --password and --authenticationDatabase options.
--password <password>, -p <password>
Specifies a password with which to authenticate to a MongoDB database that uses authentication. Use in conjunction with the --username and --authenticationDatabase options.

If you do not specify an argument for --password, mongodump will prompt interactively for a password on the console.
--authenticationDatabase <dbname>
If you do not specify an authentication database, mongodump assumes that the database specified to export holds the user's credentials.
--authenticationMechanism <name>

Default: MONGODB-CR

New in version 2.4.

Changed in version 2.6: Added support for the PLAIN and MONGODB-X509 authentication mechanisms.

Specifies the authentication mechanism the mongodump instance uses to authenticate to the mongod or mongos.

ValueDescription
MONGODB-CRMongoDB challenge/response authentication.
MONGODB-X509MongoDB SSL certificate authentication.
PLAINExternal authentication using LDAP. You can also use PLAIN for authenticating in-database users. PLAIN transmits passwords in plain text. This mechanism is available only in MongoDB Enterprise.
GSSAPIExternal authentication using Kerberos. This mechanism is available only in MongoDB Enterprise.
--gssapiServiceName

New in version 2.6.

Specify the name of the service using GSSAPI/Kerberos. Only required if the service does not use the default name of mongodb.

This option is available only in MongoDB Enterprise.

--gssapiHostName

New in version 2.6.

Specify the hostname of a service using GSSAPI/Kerberos. Only required if the hostname of a machine does not match the hostname resolved by DNS.

This option is available only in MongoDB Enterprise.

--db <database>, -d <database>
Specifies a database to backup. If you do not specify a database, mongodump copies all databases in this instance into the dump files.
--collection <collection>, -c <collection>
Specifies a collection to backup. If you do not specify a collection, this option copies all collections in the specified database or instance to the dump files.
--query <json>, -q <json>
Provides a JSON document as a query that optionally limits the documents included in the output of mongodump.
--forceTableScan

Forces mongodump to scan the data store directly: typically, mongodump saves entries as they appear in the index of the _id field. If you specify a query --query, mongodump will use the most appropriate index to support that query.

Use --forceTableScan to skip the index and scan the data directly. Typically there are two cases where this behavior is preferable to the default:

1.
If you have key sizes over 800 bytes that would not be present in the _id index.
2.
Your database uses a custom _id field.

When you run with --forceTableScan, mongodump does not use $snapshot. As a result, the dump produced by mongodump can reflect the state of the database at many different points in time.

IMPORTANT:

Use --forceTableScan with extreme caution and consideration.

--out <path>, -o <path>
Specifies the directory where mongodump will write BSON files for the dumped databases. By default, mongodump saves output files in a directory named dump in the current working directory.

To send the database dump to standard output, specify "-" instead of a path. Write to standard output if you want process the output before saving it, such as to use gzip to compress the dump. When writing standard output, mongodump does not write the metadata that writes in a <dbname>.metadata.json file when writing to files directly.
--repair
Runs a repair option in addition to dumping the database. The repair option changes the behavior of mongodump to only write valid data and exclude data that may be in an invalid state as a result of an improper shutdown or mongod crash.

The --repair option uses aggressive data-recovery algorithms that may produce a large amount of duplication.

--repair is only available for use with mongod instances using the mmapv1 storage engine. You cannot run --repair with mongos or with mongod instances that use the wiredTiger storage engine. To repair data in a mongod instance using wiredTiger use mongod --repair.
--oplog
Ensures that mongodump creates a dump of the database that includes a partial oplog containing operations from the duration of the mongodump operation. This oplog produces an effective point-in-time snapshot of the state of a mongod instance. To restore to a specific point-in-time backup, use the output created with this option in conjunction with mongorestore --oplogReplay.

Without --oplog, if there are write operations during the dump operation, the dump will not reflect a single moment in time. Changes made to the database during the update process can affect the output of the backup.

--oplog has no effect when running mongodump against a mongos instance to dump the entire contents of a sharded cluster. However, you can use --oplog to dump individual shards.

--oplog only works against nodes that maintain an oplog. This includes all members of a replica set, as well as master nodes in master/slave replication deployments.

--oplog does not dump the oplog collection.
--dumpDbUsersAndRoles
Includes user and role definitions when performing mongodump on a specific database. This option applies only when you specify a database in the --db option. MongoDB always includes user and role definitions when mongodump applies to an entire instance and not just a specific database.
--excludeCollection array of strings

New in version 3.0.0.

Specifies collections to exclude from the output of mongodump output.

--excludeCollectionsWithPrefix array of strings

New in version 3.0.0.

Excludes all collections from the output of mongodump with a specified prefix.

Use

See the http://docs.mongodb.org/manual/tutorial… for a larger overview of mongodump usage. Also see the mongorestore document for an overview of the mongorestore, which provides the related inverse functionality.

The following command creates a dump file that contains only the collection named collection in the database named test. In this case the database is running on the local interface on port 27017:

mongodump  --db test --collection collection

In the next example, mongodump creates a database dump located at /opt/backup/mongodump-2011-10-24, from a database running on port 37017 on the host mongodb1.example.net and authenticating using the username user and the password pass, as follows:

mongodump --host mongodb1.example.net --port 37017 --username user --password pass --out /opt/backup/mongodump-2011-10-24

Author

MongoDB Documentation Project

Info

January 30, 2015 3.0 mongodb-manual