ipmctl-modify-device - Man Page

ipmctl set [OPTIONS] -dimm (DimmIDs) AveragePowerReportingTimeConstant=(100-12000)

Changes the configurable setting(s) on one or more DCPMMs.

-f,  -force

Changing DCPMM setting(s) is a potentially destructive operation which requires confirmation from the user for each DCPMM. This option suppresses the confirmation.

-h,  -help

Displays help for the command.

-o (text|nvmxml), -output (text|nvmxml)

Changes the output format. One of: "text" (default) or "nvmxml".

-dimm (DimmIDs)

Modifies specific DCPMMs by supplying one or more comma-separated DCPMM identifiers. However, this is not recommended as it may put the system in an undesirable state. The default is to modify all manageable DCPMMs.

AveragePowerReportingTimeConstantMultiplier

The value that is used to multiply the base time value used for average power consumption measurements. Can be set to a value between 0 and 32. The default value is 0.

AveragePowerReportingTimeConstant

The value, in milliseconds, used to determine the time constant for reporting the average power consumption measurements. Can be set to a value between 100 and 12000, by increments of 100. The default value is 1000.

Sets average power reporting time constant multiplier to 1 on all manageable DCPMMs

set -dimm AveragePowerReportingTimeConstant=1500

In order to successfully execute this command:

• The caller must have the appropriate privileges.
• The specified DCPMM(s) must be manageable by the host software.

For each DCPMM, the CLI will indicate the status of the operation. If a failure occurs when modifying multiple DCPMMs, the process will exit and not continue modifying the remaining DCPMMs.

Modify DIMM (DimmID): Success
Modify DIMM (DimmID): Error (Code)-(Description)

ipmctl(1).