hledger man page

hledger — a command-line accounting tool


hledger [-f FILE] COMMAND [Options] [ARGS]

hledger [-f FILE] ADDONCMD -- [Options] [ARGS]



hledger is a cross-platform program for tracking money, time, or any other commodity, using double-entry accounting and a simple, editable file format. hledger is inspired by and largely compatible with ledger(1).

Tested on unix, mac, windows, hledger aims to be a reliable, practical tool for daily use.

This is hledger's command-line interface (there are also curses and web interfaces). Its basic function is to read a plain text file describing financial transactions (in accounting terms, a general journal) and print useful reports on standard output, or export them as CSV. hledger can also read some other file formats such as CSV files, translating them to journal format. Additionally, hledger lists other hledger-* executables found in the user's $PATH and can invoke them as subcommands.

hledger reads data from one or more files in hledger journal, timeclock, timedot, or CSV format specified with -f, or $LEDGER_FILE, or $HOME/.hledger.journal (on windows, perhaps C:/Users/USER/.hledger.journal). If using $LEDGER_FILE, note this must be a real environment variable, not a shell variable. You can specify standard input with -f-.

Transactions are dated movements of money between two (or more) named accounts, and are recorded with journal entries like this:

2015/10/16 bought food
 expenses:food          $10

For more about this format, see hledger_journal(5).

Most users use a text editor to edit the journal, usually with an editor mode such as ledger-mode for added convenience. hledger's interactive add command is another way to record new transactions. hledger never changes existing transactions.

To get started, you can either save some entries like the above in ~/.hledger.journal, or run hledger add and follow the prompts. Then try some commands like hledger print or hledger balance. Run hledger with no arguments for a list of commands.


Two simple transactions in hledger journal format:

2015/9/30 gift received
  assets:cash   $20

2015/10/16 farmers market
  expenses:food    $10

Some basic reports:

$ hledger print
2015/09/30 gift received
    assets:cash            $20
    income:gifts          $-20

2015/10/16 farmers market
    expenses:food           $10
    assets:cash            $-10
$ hledger accounts --tree
$ hledger balance
                 $10  assets:cash
                 $10  expenses:food
                $-20  income:gifts
$ hledger register cash
2015/09/30 gift received   assets:cash               $20           $20
2015/10/16 farmers market  assets:cash              $-10           $10

More commands:

$ hledger                                 # show available commands
$ hledger add                             # add more transactions to the journal file
$ hledger balance                         # all accounts with aggregated balances
$ hledger balance --help                  # show detailed help for balance command
$ hledger balance --depth 1               # only top-level accounts
$ hledger register                        # show account postings, with running total
$ hledger reg income                      # show postings to/from income accounts
$ hledger reg 'assets:some bank:checking' # show postings to/from this checking account
$ hledger print desc:shop                 # show transactions with shop in the description
$ hledger activity -W                     # show transaction counts per week as a bar chart


General options

To see general usage help, including general options which are supported by most hledger commands, run hledger -h.

General help options:

-h --help

show general usage (or after COMMAND, command usage)


show version


show debug output (levels 1-9, default: 1)

General input options:

-f FILE --file=FILE

use a different input file. For stdin, use - (default: $LEDGER_FILE or $HOME/.hledger.journal)


Conversion rules file to use when reading CSV (default: FILE.rules)


Field separator to expect when reading CSV (default: `,')


rename accounts named OLD to NEW


anonymize accounts and payees


use some other field or tag for the account name

-I --ignore-assertions

ignore any failing balance assertions

General reporting options:

-b --begin=DATE

include postings/txns on or after this date

-e --end=DATE

include postings/txns before this date

-D --daily

multiperiod/multicolumn report by day

-W --weekly

multiperiod/multicolumn report by week

-M --monthly

multiperiod/multicolumn report by month

-Q --quarterly

multiperiod/multicolumn report by quarter

-Y --yearly

multiperiod/multicolumn report by year

-p --period=PERIODEXP

set start date, end date, and/or reporting interval all at once using period expressions syntax (overrides the flags above)


match the secondary date instead (see command help for other effects)

-U --unmarked

include only unmarked postings/txns (can combine with -P or -C)

-P --pending

include only pending postings/txns

-C --cleared

include only cleared postings/txns

-R --real

include only non-virtual postings

-NUM --depth=NUM

hide/aggregate accounts or postings more than NUM levels deep

-E --empty

show items with zero amount, normally hidden (and vice-versa in hledger-ui/hledger-web)

-B --cost

convert amounts to their cost at transaction time (using the transaction price, if any)

-V --value

convert amounts to their market value on the report end date (using the most recent applicable market price, if any)


apply automated posting rules to modify transactions.


apply periodic transaction rules to generate future transactions, to 6 months from now or report end date.

When a reporting option appears more than once in the command line, the last one takes precedence.

Some reporting options can also be written as query arguments.

Command options

To see options for a particular command, including command-specific options, run: hledger COMMAND -h.

Command-specific options must be written after the command name, eg: hledger print -x.

Additionally, if the command is an addon, you may need to put its options after a double-hyphen, eg: hledger ui -- --watch. Or, you can run the addon executable directly: hledger-ui --watch.

Command arguments

Most hledger commands accept arguments after the command name, which are often a query, filtering the data in some way.

Argument files

You can save a set of command line options/arguments in a file, one per line, and then reuse them by writing @FILENAME in a command line. To prevent this expansion of @-arguments, precede them with a -- argument. For more, see Save frequently used options.

Special characters in arguments and queries

In shell command lines, option and argument values which contain “problematic” characters, ie spaces, and also characters significant to your shell such as <, >, (, ), | and $, should be escaped by enclosing them in quotes or by writing backslashes before the characters. Eg:

hledger register -p 'last year' "accounts receivable (receivable|payable)" amt:\>100.

More escaping

Characters significant both to the shell and in regular expressions may need one extra level of escaping. These include parentheses, the pipe symbol and the dollar sign. Eg, to match the dollar symbol, bash users should do:

hledger balance cur:'\$'


hledger balance cur:\\$

Even more escaping

When hledger runs an addon executable (eg you type hledger ui, hledger runs hledger-ui), it de-escapes command-line options and arguments once, so you might need to triple-escape. Eg in bash, running the ui command and matching the dollar sign, it's:

hledger ui cur:'\\$'


hledger ui cur:\\\\$

If you asked why four slashes above, this may help:


(The number of backslashes in fish shell is left as an exercise for the reader.)

You can always avoid the extra escaping for addons by running the addon directly:

hledger-ui cur:\\$

Less escaping

Inside an argument file, or in the search field of hledger-ui or hledger-web, or at a GHCI prompt, you need one less level of escaping than at the command line. And backslashes may work better than quotes. Eg:

ghci> :main balance cur:\$

Command line tips

If in doubt, keep things simple:

  • write options after the command (hledger CMD -OPTIONS ARGS)
  • run add-on executables directly (hledger-ui -OPTIONS ARGS)
  • enclose problematic args in single quotes
  • if needed, also add a backslash to escape regexp metacharacters

To find out exactly how a command line is being parsed, add --debug=2 to troubleshoot.

Unicode characters

hledger is expected to handle unicode (non-ascii) characters, but this requires a well-configured environment.

To handle unicode characters in the command line or input data, a system locale that can decode them must be configured (POSIX's default C locale will not work). Eg in bash, you could do:

export LANG=en_US.UTF-8

See Troubleshooting for more about this.

Unicode characters should appear correctly in hledger's output. For the hledger and hledger-ui tools, this requires that

  • your terminal supports unicode
  • the terminal's font includes the required unicode glyphs
  • the terminal is configured to display “wide” characters as double width (otherwise report alignment will be off)

Input files

hledger reads transactions from a data file (and the add command writes to it). By default this file is $HOME/.hledger.journal (or on Windows, something like C:/Users/USER/.hledger.journal). You can override this with the $LEDGER_FILE environment variable:

$ setenv LEDGER_FILE ~/finance/2016.journal
$ hledger stats

or with the -f/--file option:

$ hledger -f /some/file stats

The file name - (hyphen) means standard input:

$ cat some.journal | hledger -f-

Usually the data file is in hledger's journal format, but it can also be one of several other formats, listed below. hledger detects the format automatically based on the file extension, or if that is not recognised, by trying each built-in “reader” in turn:

Reader:Reads:Used for file extensions:
journalhledger's journal format, also some Ledger journals.journal .j .hledger .ledger
timeclocktimeclock files (precise time logging).timeclock
timedottimedot files (approximate time logging).timedot
csvcomma-separated values (data interchange).csv

If needed (eg to ensure correct error messages when a file has the “wrong” extension), you can force a specific reader/format by prepending it to the file path with a colon. Examples:

$ hledger -f csv:/some/csv-file.dat stats
$ echo 'i 2009/13/1 08:00:00' | hledger print -ftimeclock:-

You can also specify multiple -f options, to read multiple files as one big journal. There are some limitations with this:

  • directives in one file will not affect the other files
  • balance assertions will not see any account balances from previous files

If you need those, either use the include directive, or concatenate the files, eg: cat a.journal b.journal | hledger -f- CMD.

Smart dates

hledger's user interfaces accept a flexible “smart date” syntax (unlike dates in the journal file). Smart dates allow some english words, can be relative to today's date, and can have less-significant date parts omitted (defaulting to 1).


2004/10/1, 2004-01-01, 2004.9.1exact date, several separators allowed. Year is 4+ digits, month is 1-12, day is 1-31
2004start of year
2004/10start of month
10/1month and day in current year
21day in current month
october, octstart of month in current year
yesterday, today, tomorrow-1, 0, 1 days from today
last/this/next day/week/month/quarter/year-1, 0, 1 periods from the current period
201812018 digit YYYYMMDD with valid year month and day
2018126 digit YYYYMM with valid year and month

Counterexamples - malformed digit sequences might give surprising results:

2018136 digits with an invalid month is parsed as start of 6-digit year
201813018 digits with an invalid month is parsed as start of 8-digit year
201812328 digits with an invalid day gives an error
2018010129+ digits beginning with a valid YYYYMMDD gives an error

Report start & end date

Most hledger reports show the full span of time represented by the journal data, by default. So, the effective report start and end dates will be the earliest and latest transaction or posting dates found in the journal.

Often you will want to see a shorter time span, such as the current month. You can specify a start and/or end date using -b/--begin, -e/--end, -p/--period or a date: query (described below). All of these accept the smart date syntax. One important thing to be aware of when specifying end dates: as in Ledger, end dates are exclusive, so you need to write the date after the last day you want to include.


-b 2016/3/17begin on St. Patrick's day 2016
-e 12/1end at the start of december 1st of the current year (11/30 will be the last date included)
-b thismonthall transactions on or after the 1st of the current month
-p thismonthall transactions in the current month
date:2016/3/17-the above written as queries instead

Report intervals

A report interval can be specified so that commands like register, balance and activity will divide their reports into multiple subperiods. The basic intervals can be selected with one of -D/--daily, -W/--weekly, -M/--monthly, -Q/--quarterly, or -Y/--yearly. More complex intervals may be specified with a period expression. Report intervals can not be specified with a query, currently.

Period expressions

The -p/--period option accepts period expressions, a shorthand way of expressing a start date, end date, and/or report interval all at once.

Here's a basic period expression specifying the first quarter of 2009. Note, hledger always treats start dates as inclusive and end dates as exclusive:

-p "from 2009/1/1 to 2009/4/1"

Keywords like “from” and “to” are optional, and so are the spaces, as long as you don't run two dates together. “to” can also be written as “-”. These are equivalent to the above:

-p "2009/1/1 2009/4/1"

Dates are smart dates, so if the current year is 2009, the above can also be written as:

-p "1/1 4/1"
-p "january-apr"
-p "this year to 4/1"

If you specify only one date, the missing start or end date will be the earliest or latest transaction in your journal:

-p "from 2009/1/1"everything after january 1, 2009
-p "from 2009/1"the same
-p "from 2009"the same
-p "to 2009"everything before january 1, 2009

A single date with no “from” or “to” defines both the start and end date like so:

-p "2009"the year 2009; equivalent to “2009/1/1 to 2010/1/1”
-p "2009/1"the month of jan; equivalent to “2009/1/1 to 2009/2/1”
-p "2009/1/1"just that day; equivalent to “2009/1/1 to 2009/1/2”

The argument of -p can also begin with, or be, a report interval expression. The basic report intervals are daily, weekly, monthly, quarterly, or yearly, which have the same effect as the -D,-W,-M,-Q, or -Y flags. Between report interval and start/end dates (if any), the word in is optional. Examples:

-p "weekly from 2009/1/1 to 2009/4/1"
-p "monthly in 2008"
-p "quarterly"

Note that weekly, monthly, quarterly and yearly intervals will always start on the first day on week, month, quarter or year accordingly, and will end on the last day of same period, even if associated period expression specifies different explicit start and end date.

For example:

-p "weekly from 2009/1/1 to 2009/4/1" – starts on 2008/12/29, closest preceeding Monday
-p "monthly in 2008/11/25" – starts on 2018/11/01
-p "quarterly from 2009-05-05 to 2009-06-01" - starts on 2009/04/01, ends on 2009/06/30, which are first and last days of Q2 2009
-p "yearly from 2009-12-29" - starts on 2009/01/01, first day of 2009

The following more complex report intervals are also supported: biweekly, bimonthly, every day|week|month|quarter|year, every N days|weeks|months|quarters|years.

All of these will start on the first day of the requested period and end on the last one, as described above.


-p "bimonthly from 2008" – periods will have boundaries on 2008/01/01, 2008/03/01, ...
-p "every 2 weeks" – starts on closest preceeding Monday
-p "every 5 month from 2009/03" – periods will have boundaries on 2009/03/01, 2009/08/01, ...

If you want intervals that start on arbitrary day of your choosing and span a week, month or year, you need to use any of the following:

every Nth day of week, every <weekday>, every Nth day [of month], every Nth weekday [of month], every MM/DD [of year], every Nth MMM [of year], every MMM Nth [of year].


-p "every 2nd day of week" – periods will go from Tue to Tue
-p "every Tue" – same
-p "every 15th day" – period boundaries will be on 15th of each month
-p "every 2nd Monday" – period boundaries will be on second Monday of each month
-p "every 11/05" – yearly periods with boundaries on 5th of Nov
-p "every 5th Nov" – same
-p "every Nov 5th" – same

Show historical balances at end of 15th each month (N is exclusive end date):

hledger balance -H -p "every 16th day"

Group postings from start of wednesday to end of next tuesday (N is start date and exclusive end date):

hledger register checking -p "every 3rd day of week"

Depth limiting

With the --depth N option (short form: -N), commands like account, balance and register will show only the uppermost accounts in the account tree, down to level N. Use this when you want a summary with less detail. This flag has the same effect as a depth: query argument (so -2, --depth=2 or depth:2 are basically equivalent).


Normally hledger sums amounts, and organizes them in a hierarchy, based on account name. The --pivot FIELD option causes it to sum and organize hierarchy based on the value of some other field instead. FIELD can be: code, description, payee, note, or the full name (case insensitive) of any tag. As with account names, values containing colon:separated:parts will be displayed hierarchically in reports.

--pivot is a general option affecting all reports; you can think of hledger transforming the journal before any other processing, replacing every posting's account name with the value of the specified field on that posting, inheriting it from the transaction or using a blank value if it's not present.

An example:

2016/02/16 Member Fee Payment
    assets:bank account                    2 EUR
    income:member fees                    -2 EUR  ; member: John Doe

Normal balance report showing account names:

$ hledger balance
               2 EUR  assets:bank account
              -2 EUR  income:member fees

Pivoted balance report, using member: tag values instead:

$ hledger balance --pivot member
               2 EUR
              -2 EUR  John Doe

One way to show only amounts with a member: value (using a query, described below):

$ hledger balance --pivot member tag:member=.
              -2 EUR  John Doe
              -2 EUR

Another way (the acct: query matches against the pivoted “account name”):

$ hledger balance --pivot member acct:.
              -2 EUR  John Doe
              -2 EUR


The -B/--cost flag converts amounts to their cost at transaction time, if they have a transaction price specified.

Market value

The -V/--value flag converts reported amounts to their current market value.

Specifically, when there is a market price (P directive) for the amount's commodity, dated on or before today's date (or the report end date if specified), the amount will be converted to the price's commodity.

When there are multiple applicable P directives, -V chooses the most recent one, or in case of equal dates, the last-parsed one.

For example:

# one euro is worth this many dollars from nov 1
P 2016/11/01 € $1.10

# purchase some euros on nov 3
    assets:euros        €100

# the euro is worth fewer dollars by dec 21
P 2016/12/21 € $1.03

How many euros do I have ?

$ hledger -f t.j bal -N euros
                €100  assets:euros

What are they worth at end of nov 3 ?

$ hledger -f t.j bal -N euros -V -e 2016/11/4
             $110.00  assets:euros

What are they worth after 2016/12/21 ? (no report end date specified, defaults to today)

$ hledger -f t.j bal -N euros -V
             $103.00  assets:euros

Currently, hledger's -V only uses market prices recorded with P directives, not transaction prices (unlike Ledger).

Currently, -V has a limitation in multicolumn balance reports: it uses the market prices on the report end date for all columns. (Instead of the prices on each column's end date.)

Combining -B and -V

Using -B/–cost and -V/–value together is currently allowed, but the results are probably not meaningful. Let us know if you find a use for this.

Output destination

Some commands (print, register, stats, the balance commands) can write their output to a destination other than the console. This is controlled by the -o/--output-file option.

$ hledger balance -o -     # write to stdout (the default)
$ hledger balance -o FILE  # write to FILE

Output format

Some commands can write their output in other formats. Eg print and register can output CSV, and the balance commands can output CSV or HTML. This is controlled by the -O/--output-format option, or by specifying a .csv or .html file extension with -o/--output-file.

$ hledger balance -O csv       # write CSV to stdout
$ hledger balance -o FILE.csv  # write CSV to FILE.csv

Regular expressions

hledger uses regular expressions in a number of places:

  • query terms, on the command line and in the hledger-web search form: REGEX, desc:REGEX, cur:REGEX, tag:...=REGEX
  • CSV rules conditional blocks: if REGEX ...
  • account alias directives and options: alias /REGEX/ = REPLACEMENT, --alias /REGEX/=REPLACEMENT

hledger's regular expressions come from the regex-tdfa library. In general they:

  • are case insensitive
  • are infix matching (do not need to match the entire thing being matched)
  • are POSIX extended regular expressions
  • also support GNU word boundaries (\<, \>, \b, \B)
  • and parenthesised capturing groups and numeric backreferences in replacement strings
  • do not support mode modifiers like (?s)

Some things to note:

  • In the alias directive and --alias option, regular expressions must be enclosed in forward slashes (/REGEX/). Elsewhere in hledger, these are not required.
  • In queries, to match a regular expression metacharacter like $ as a literal character, prepend a backslash. Eg to search for amounts with the dollar sign in hledger-web, write cur:\$.
  • On the command line, some metacharacters like $ have a special meaning to the shell and so must be escaped at least once more. See Special characters.


One of hledger's strengths is being able to quickly report on precise subsets of your data. Most commands accept an optional query expression, written as arguments after the command name, to filter the data by date, account name or other criteria. The syntax is similar to a web search: one or more space-separated search terms, quotes to enclose whitespace, prefixes to match specific fields, a not: prefix to negate the match.

We do not yet support arbitrary boolean combinations of search terms; instead most commands show transactions/postings/accounts which match (or negatively match):

The print command instead shows transactions which:

The following kinds of search terms can be used. Remember these can also be prefixed with not:, eg to exclude a particular subaccount.


match account names by this regular expression. (With no prefix, acct: is assumed.)

same as above

amt:N, amt:<N, amt:<=N, amt:>N, amt:>=N

match postings with a single-commodity amount that is equal to, less than, or greater than N. (Multi-commodity amounts are not tested, and will always match.) The comparison has two modes: if N is preceded by a + or - sign (or is 0), the two signed numbers are compared. Otherwise, the absolute magnitudes are compared, ignoring sign.


match by transaction code (eg check number)


match postings or transactions including any amounts whose currency/commodity symbol is fully matched by REGEX. (For a partial match, use .*REGEX.*). Note, to match characters which are regex-significant, like the dollar sign ($), you need to prepend \. And when using the command line you need to add one more level of quoting to hide it from the shell, so eg do: hledger print cur:'\$' or hledger print cur:\\$.


match transaction descriptions.


match dates within the specified period. PERIODEXPR is a period expression (with no report interval). Examples: date:2016, date:thismonth, date:2000/2/1-2/15, date:lastweek-. If the --date2 command line flag is present, this matches secondary dates instead.


match secondary dates within the specified period.


match (or display, depending on command) accounts at or above this depth


match transaction notes (part of description right of |, or whole description when there's no |)


match transaction payee/payer names (part of description left of |, or whole description when there's no |)

real:, real:0

match real or virtual postings respectively

status:, status:!, status:*

match unmarked, pending, or cleared transactions respectively


match by tag name, and optionally also by tag value. Note a tag: query is considered to match a transaction if it matches any of the postings. Also remember that postings inherit the tags of their parent transaction.

The following special search term is used automatically in hledger-web, only:


tells hledger-web to show the transaction register for this account. Can be filtered further with acct etc.

Some of these can also be expressed as command-line options (eg depth:2 is equivalent to --depth 2). Generally you can mix options and query arguments, and the resulting query will be their intersection (perhaps excluding the -p/--period option).


hledger provides a number of subcommands; hledger with no arguments shows a list.

If you install additional hledger-* packages, or if you put programs or scripts named hledger-NAME in your PATH, these will also be listed as subcommands.

Run a subcommand by writing its name as first argument (eg hledger incomestatement). You can also write one of the standard short aliases displayed in parentheses in the command list (hledger b), or any any unambiguous prefix of a command name (hledger inc).

Here are all the builtin commands in alphabetical order. See also hledger for a more organised command list, and hledger CMD -h for detailed command help.


Show account names. Alias: a.


show account names declared with account directives


show account names posted to by transactions


show short account names and their parents, as a tree


show full account names, as a list (default)


in flat mode: omit N leading account name parts

This command lists account names, either declared with account directives (–declared), posted to (–used), or both (default). With query arguments, only matched account names and account names referenced by matched postings are shown. It shows a flat list by default. With --tree, it uses indentation to show the account hierarchy. In flat mode you can add --drop N to omit the first few account name components. Account names can be depth-clipped with --depth N or depth:N.


$ hledger accounts --tree
$ hledger accounts --drop 1
$ hledger accounts


Show an ascii barchart of posting counts per interval.

The activity command displays an ascii histogram showing transaction counts by day, week, month or other reporting interval (by day is the default). With query arguments, it counts only matched transactions.

$ hledger activity --quarterly
2008-01-01 **
2008-04-01 *******
2008-10-01 **


Prompt for transactions and add them to the journal.


don't allow creating new accounts; helps prevent typos when entering account names

Many hledger users edit their journals directly with a text editor, or generate them from CSV. For more interactive data entry, there is the add command, which prompts interactively on the console for new transactions, and appends them to the journal file (if there are multiple -f FILE options, the first file is used.) Existing transactions are not changed. This is the only hledger command that writes to the journal file.

To use it, just run hledger add and follow the prompts. You can add as many transactions as you like; when you are finished, enter . or press control-d or control-c to exit.


  • add tries to provide useful defaults, using the most similar recent transaction (by description) as a template.
  • You can also set the initial defaults with command line arguments.
  • Readline-style edit keys can be used during data entry.
  • The tab key will auto-complete whenever possible - accounts, descriptions, dates (yesterday, today, tomorrow). If the input area is empty, it will insert the default value.
  • If the journal defines a default commodity, it will be added to any bare numbers entered.
  • A parenthesised transaction code may be entered following a date.
  • Comments and tags may be entered following a description or amount.
  • If you make a mistake, enter < at any prompt to restart the transaction.
  • Input prompts are displayed in a different colour when the terminal supports it.

Example (see the tutorial for a detailed explanation):

$ hledger add
Adding transactions to journal file /src/hledger/examples/sample.journal
Any command line arguments will be used as defaults.
Use tab key to complete, readline keys to edit, enter to accept defaults.
An optional (CODE) may follow transaction dates.
An optional ; COMMENT may follow descriptions or amounts.
If you make a mistake, enter < at any prompt to restart the transaction.
To end a transaction, enter . when prompted.
To quit, enter . at a date prompt or press control-d or control-c.
Date [2015/05/22]: 
Description: supermarket
Account 1: expenses:food
Amount  1: $10
Account 2: assets:checking
Amount  2 [$-10.0]: 
Account 3 (or . or enter to finish this transaction): .
2015/05/22 supermarket
    expenses:food             $10
    assets:checking        $-10.0

Save this transaction to the journal ? [y]: 
Starting the next transaction (. or ctrl-D/ctrl-C to quit)
Date [2015/05/22]: <CTRL-D> $


Show accounts and their balances. Aliases: b, bal.


show balance change in each period (default)


show balance change accumulated across periods (in multicolumn reports)

-H --historical

show historical ending balance in each period (includes postings before report start date)


show accounts as a tree; amounts include subaccounts (default in simple reports)


show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports)

-A --average

show a row average column (in multicolumn mode)

-T --row-total

show a row total column (in multicolumn mode)

-N --no-total

don't show the final total row


omit N leading account name parts (in flat mode)


don't squash boring parent accounts (in tree mode)


in single-column balance reports: use this custom line format

-O FMT --output-format=FMT

select the output format. Supported formats: txt, csv, html.

-o FILE --output-file=FILE

write output to FILE. A file extension matching one of the above formats selects that format.


use unicode to display prettier tables.


sort by amount instead of account code/name (in flat mode). With multiple columns, sorts by the row total, or by row average if that is displayed.


display all amounts with reversed sign


show performance compared to budget goals defined by periodic transactions


with –budget, show unbudgeted accounts also

The balance command is hledger's most versatile command. Note, despite the name, it is not always used for showing real-world account balances; the more accounting-aware balancesheet and incomestatement may be more convenient for that.

By default, it displays all accounts, and each account's change in balance during the entire period of the journal. Balance changes are calculated by adding up the postings in each account. You can limit the postings matched, by a query, to see fewer accounts, changes over a different time period, changes from only cleared transactions, etc.

If you include an account's complete history of postings in the report, the balance change is equivalent to the account's current ending balance. For a real-world account, typically you won't have all transactions in the journal; instead you'll have all transactions after a certain date, and an “opening balances” transaction setting the correct starting balance on that date. Then the balance command will show real-world account balances. In some cases the -H/–historical flag is used to ensure this (more below).

The balance command can produce several styles of report:

Classic balance report

This is the original balance report, as found in Ledger. It usually looks like this:

$ hledger balance
                 $-1  assets
                  $1    bank:saving
                 $-2    cash
                  $2  expenses
                  $1    food
                  $1    supplies
                 $-2  income
                 $-1    gifts
                 $-1    salary
                  $1  liabilities:debts

By default, accounts are displayed hierarchically, with subaccounts indented below their parent. At each level of the tree, accounts are sorted by account code if any, then by account name. Or with -S/--sort-amount, by their balance amount.

“Boring” accounts, which contain a single interesting subaccount and no balance of their own, are elided into the following line for more compact output. (Eg above, the “liabilities” account.) Use --no-elide to prevent this.

Account balances are “inclusive” - they include the balances of any subaccounts.

Accounts which have zero balance (and no non-zero subaccounts) are omitted. Use -E/--empty to show them.

A final total is displayed by default; use -N/--no-total to suppress it, eg:

$ hledger balance -p 2008/6 expenses --no-total
                  $2  expenses
                  $1    food
                  $1    supplies

Customising the classic balance report

You can customise the layout of classic balance reports with --format FMT:

$ hledger balance --format "%20(account) %12(total)"
              assets          $-1
         bank:saving           $1
                cash          $-2
            expenses           $2
                food           $1
            supplies           $1
              income          $-2
               gifts          $-1
              salary          $-1
   liabilities:debts           $1

The FMT format string (plus a newline) specifies the formatting applied to each account/balance pair. It may contain any suitable text, with data fields interpolated like so:


  • MIN pads with spaces to at least this width (optional)
  • MAX truncates at this width (optional)
  • FIELDNAME must be enclosed in parentheses, and can be one of:

    • depth_spacer - a number of spaces equal to the account's depth, or if MIN is specified, MIN * depth spaces.
    • account - the account's name
    • total - the account's balance/posted total, right justified

Also, FMT can begin with an optional prefix to control how multi-commodity amounts are rendered:

  • %_ - render on multiple lines, bottom-aligned (the default)
  • %^ - render on multiple lines, top-aligned
  • %, - render on one line, comma-separated

There are some quirks. Eg in one-line mode, %(depth_spacer) has no effect, instead %(account) has indentation built in.
Experimentation may be needed to get pleasing results.

Some example formats:

  • %(total) - the account's total
  • %-20.20(account) - the account's name, left justified, padded to 20 characters and clipped at 20 characters
  • %,%-50(account)  %25(total) - account name padded to 50 characters, total padded to 20 characters, with multiple commodities rendered on one line
  • %20(total)  %2(depth_spacer)%-(account) - the default format for the single-column balance report

Colour support

The balance command shows negative amounts in red, if:

  • the TERM environment variable is not set to dumb
  • the output is not being redirected or piped anywhere

Flat mode

To see a flat list instead of the default hierarchical display, use --flat. In this mode, accounts (unless depth-clipped) show their full names and “exclusive” balance, excluding any subaccount balances. In this mode, you can also use --drop N to omit the first few account name components.

$ hledger balance -p 2008/6 expenses -N --flat --drop 1
                  $1  food
                  $1  supplies

Depth limited balance reports

With --depth N or depth:N or just -N, balance reports show accounts only to the specified numeric depth. This is very useful to summarise a complex set of accounts and get an overview.

$ hledger balance -N -1
                 $-1  assets
                  $2  expenses
                 $-2  income
                  $1  liabilities

Flat-mode balance reports, which normally show exclusive balances, show inclusive balances at the depth limit.

Multicolumn balance report

Multicolumn or tabular balance reports are a very useful hledger feature, and usually the preferred style. They share many of the above features, but they show the report as a table, with columns representing time periods. This mode is activated by providing a reporting interval.

There are three types of multicolumn balance report, showing different information:

  1. By default: each column shows the sum of postings in that period, ie the account's change of balance in that period. This is useful eg for a monthly income statement:

    $ hledger balance --quarterly income expenses -E
    Balance changes in 2008:
                       ||  2008q1  2008q2  2008q3  2008q4 
     expenses:food     ||       0      $1       0       0 
     expenses:supplies ||       0      $1       0       0 
     income:gifts      ||       0     $-1       0       0 
     income:salary     ||     $-1       0       0       0 
                       ||     $-1      $1       0       0 
  2. With --cumulative: each column shows the ending balance for that period, accumulating the changes across periods, starting from 0 at the report start date:

    $ hledger balance --quarterly income expenses -E --cumulative
    Ending balances (cumulative) in 2008:
                       ||  2008/03/31  2008/06/30  2008/09/30  2008/12/31 
     expenses:food     ||           0          $1          $1          $1 
     expenses:supplies ||           0          $1          $1          $1 
     income:gifts      ||           0         $-1         $-1         $-1 
     income:salary     ||         $-1         $-1         $-1         $-1 
                       ||         $-1           0           0           0 
  3. With --historical/-H: each column shows the actual historical ending balance for that period, accumulating the changes across periods, starting from the actual balance at the report start date. This is useful eg for a multi-period balance sheet, and when you are showing only the data after a certain start date:

    $ hledger balance ^assets ^liabilities --quarterly --historical --begin 2008/4/1
    Ending balances (historical) in 2008/04/01-2008/12/31:
                          ||  2008/06/30  2008/09/30  2008/12/31 
     assets:bank:checking ||          $1          $1           0 
     assets:bank:saving   ||          $1          $1          $1 
     assets:cash          ||         $-2         $-2         $-2 
     liabilities:debts    ||           0           0          $1 
                          ||           0           0           0 

Multicolumn balance reports display accounts in flat mode by default; to see the hierarchy, use --tree.

With a reporting interval (like --quarterly above), the report start/end dates will be adjusted if necessary so that they encompass the displayed report periods. This is so that the first and last periods will be “full” and comparable to the others.

The -E/--empty flag does two things in multicolumn balance reports: first, the report will show all columns within the specified report period (without -E, leading and trailing columns with all zeroes are not shown). Second, all accounts which existed at the report start date will be considered, not just the ones with activity during the report period (use -E to include low-activity accounts which would otherwise would be omitted).

The -T/--row-total flag adds an additional column showing the total for each row.

The -A/--average flag adds a column showing the average value in each row.

Here's an example of all three:

$ hledger balance -Q income expenses --tree -ETA
Balance changes in 2008:

            ||  2008q1  2008q2  2008q3  2008q4    Total  Average 
 expenses   ||       0      $2       0       0       $2       $1 
   food     ||       0      $1       0       0       $1        0 
   supplies ||       0      $1       0       0       $1        0 
 income     ||     $-1     $-1       0       0      $-2      $-1 
   gifts    ||       0     $-1       0       0      $-1        0 
   salary   ||     $-1       0       0       0      $-1        0 
            ||     $-1      $1       0       0        0        0 

# Average is rounded to the dollar here since all journal amounts are


In multicolumn reports the -V/--value flag uses the market price on the report end date, for all columns (not the price on each column's end date).

Eliding of boring parent accounts in tree mode, as in the classic balance report, is not yet supported in multicolumn reports.

Budget report

With --budget, extra columns are displayed showing budget goals for each account and period, if any. Budget goals are defined by periodic transactions. This is very useful for comparing planned and actual income, expenses, time usage, etc. –budget is most often combined with a report interval.

For example, you can take average monthly expenses in the common expense categories to construct a minimal monthly budget:

;; Budget
~ monthly
  income  $2000
  expenses:food    $400
  expenses:bus     $50
  expenses:movies  $30

;; Two months worth of expenses
  income  $1950
  expenses:food    $396
  expenses:bus     $49
  expenses:movies  $30
  expenses:supplies  $20

  income  $2100
  expenses:food    $412
  expenses:bus     $53
  expenses:gifts   $100

You can now see a monthly budget report:

$ hledger balance -M --budget
Budget performance in 2017/11/01-2017/12/31:

                      ||                2017/11                  2017/12 
 <unbudgeted>         ||                    $20                     $100 
 assets:bank:checking || $-2445 [99% of $-2480]  $-2665 [107% of $-2480] 
 expenses:bus         ||       $49 [98% of $50]        $53 [106% of $50] 
 expenses:food        ||     $396 [99% of $400]      $412 [103% of $400] 
 expenses:movies      ||      $30 [100% of $30]            0 [0% of $30] 
 income               ||   $1950 [98% of $2000]    $2100 [105% of $2000] 
                      ||                      0                        0 

By default, only accounts with budget goals during the report period are shown. --show-unbudgeted shows unbudgeted accounts as well. Top-level accounts with no budget goals anywhere below them are grouped under <unbudgeted>.

You can roll over unspent budgets to next period with --cumulative:

$ hledger balance -M --budget --cumulative
Budget performance in 2017/11/01-2017/12/31:

                      ||             2017/11/30               2017/12/31 
 <unbudgeted>         ||                    $20                     $120 
 assets:bank:checking || $-2445 [99% of $-2480]  $-5110 [103% of $-4960] 
 expenses:bus         ||       $49 [98% of $50]      $102 [102% of $100] 
 expenses:food        ||     $396 [99% of $400]      $808 [101% of $800] 
 expenses:movies      ||      $30 [100% of $30]         $30 [50% of $60] 
 income               ||   $1950 [98% of $2000]    $4050 [101% of $4000] 
                      ||                      0                        0

Note, the -S/--sort-amount flag is not yet fully supported with --budget.

For more examples, see Budgeting and Forecasting.

Output format

The balance command supports output destination and output format selection.


This command displays a simple balance sheet, showing historical ending balances of asset and liability accounts (ignoring any report begin date). It assumes that these accounts are under a top-level asset or liability account (case insensitive, plural forms also allowed). Note this report shows all account balances with normal positive sign (like conventional financial statements, unlike balance/print/register) (experimental). (bs)


show balance change in each period, instead of historical ending balances


show balance change accumulated across periods (in multicolumn reports), instead of historical ending balances

-H --historical

show historical ending balance in each period (includes postings before report start date) (default)


show accounts as a tree; amounts include subaccounts (default in simple reports)


show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports)

-A --average

show a row average column (in multicolumn mode)

-T --row-total

show a row total column (in multicolumn mode)

-N --no-total

don't show the final total row


omit N leading account name parts (in flat mode)


don't squash boring parent accounts (in tree mode)


in single-column balance reports: use this custom line format


sort by amount instead of account code/name


$ hledger balancesheet
Balance Sheet

                 $-1  assets
                  $1    bank:saving
                 $-2    cash

                  $1  liabilities:debts


With a reporting interval, multiple columns will be shown, one for each report period. As with multicolumn balance reports, you can alter the report mode with --change/--cumulative/--historical. Normally balancesheet shows historical ending balances, which is what you need for a balance sheet; note this means it ignores report begin dates.

This command also supports output destination and output format selection.


Just like balancesheet, but also reports Equity (which it assumes is under a top-level equity account).


$ hledger balancesheetequity
Balance Sheet With Equity

                 $-2  assets
                  $1    bank:saving
                 $-3    cash

                  $1  liabilities:debts

          $1  equity:owner



This command displays a simple cashflow statement, showing changes in “cash” accounts. It assumes that these accounts are under a top-level asset account (case insensitive, plural forms also allowed) and do not contain receivable or A/R in their name. Note this report shows all account balances with normal positive sign (like conventional financial statements, unlike balance/print/register) (experimental). (cf)


show balance change in each period (default)


show balance change accumulated across periods (in multicolumn reports), instead of changes during periods

-H --historical

show historical ending balance in each period (includes postings before report start date), instead of changes during each period


show accounts as a tree; amounts include subaccounts (default in simple reports)


show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports)

-A --average

show a row average column (in multicolumn mode)

-T --row-total

show a row total column (in multicolumn mode)

-N --no-total

don't show the final total row (in simple reports)


omit N leading account name parts (in flat mode)


don't squash boring parent accounts (in tree mode)


in single-column balance reports: use this custom line format


sort by amount instead of account code/name


$ hledger cashflow
Cashflow Statement

Cash flows:
                 $-1  assets
                  $1    bank:saving
                 $-2    cash


With a reporting interval, multiple columns will be shown, one for each report period. Normally cashflow shows changes in assets per period, though as with multicolumn balance reports you can alter the report mode with --change/--cumulative/--historical.

This command also supports output destination and output format selection.


Check that transactions are sorted by increasing date. With a query, only matched transactions' dates are checked.


Report account names having the same leaf but different prefixes. An example: http://stefanorodighiero.net/software/hledger-dupes.html


Print closing/opening transactions that bring some or all account balances to zero and back. Can be useful for bringing asset/liability balances across file boundaries, or for closing out income/expenses for a period. This was formerly called “equity”, as in Ledger, and that alias is also accepted. See close –help for more.


List all files included in the journal. With a REGEX argument, only file names matching the regular expression (case sensitive) are shown.


Show any of the hledger manuals.

The help command displays any of the main hledger manuals, in one of several ways. Run it with no argument to list the manuals, or provide a full or partial manual name to select one.

hledger manuals are available in several formats. hledger help will use the first of these display methods that it finds: info, man, $PAGER, less, stdout (or when non-interactive, just stdout). You can force a particular viewer with the --info, --man, --pager, --cat flags.

$ hledger help
Please choose a manual by typing "hledger help MANUAL" (a substring is ok).
Manuals: hledger hledger-ui hledger-web hledger-api journal csv timeclock timedot
$ hledger help h --man

hledger(1)                    hledger User Manuals                    hledger(1)

       hledger - a command-line accounting tool

       hledger [-f FILE] COMMAND [OPTIONS] [ARGS]
       hledger [-f FILE] ADDONCMD -- [OPTIONS] [ARGS]

       hledger  is  a  cross-platform  program  for tracking money, time, or any


Read new transactions added to each FILE since last run, and add them to the main journal file.


just show the transactions to be imported

The input files are specified as arguments - no need to write -f before each one. So eg to add new transactions from all CSV files to the main journal, it's just: hledger import *.csv

New transactions are detected in the same way as print –new: by assuming transactions are always added to the input files in increasing date order, and by saving .latest.FILE state files.

The –dry-run output is in journal format, so you can filter it, eg to see only uncategorised transactions:

$ hledger import --dry ... | hledger -f- print unknown --ignore-assertions


This command displays a simple income statement, showing revenues and expenses during a period. It assumes that these accounts are under a top-level revenue or income or expense account (case insensitive, plural forms also allowed). Note this report shows all account balances with normal positive sign (like conventional financial statements, unlike balance/print/register) (experimental). (is)


show balance change in each period (default)


show balance change accumulated across periods (in multicolumn reports), instead of changes during periods

-H --historical

show historical ending balance in each period (includes postings before report start date), instead of changes during each period


show accounts as a tree; amounts include subaccounts (default in simple reports)


show accounts as a list; amounts exclude subaccounts except when account is depth-clipped (default in multicolumn reports)

-A --average

show a row average column (in multicolumn mode)

-T --row-total

show a row total column (in multicolumn mode)

-N --no-total

don't show the final total row


omit N leading account name parts (in flat mode)


don't squash boring parent accounts (in tree mode)


in single-column balance reports: use this custom line format


sort by amount instead of account code/name

This command displays a simple income statement. It currently assumes that you have top-level accounts named income (or revenue) and expense (plural forms also allowed.)

$ hledger incomestatement
Income Statement

                 $-2  income
                 $-1    gifts
                 $-1    salary

                  $2  expenses
                  $1    food
                  $1    supplies


With a reporting interval, multiple columns will be shown, one for each report period. Normally incomestatement shows revenues/expenses per period, though as with multicolumn balance reports you can alter the report mode with --change/--cumulative/--historical.

This command also supports output destination and output format selection.


Print market price directives from the journal. With –costs, also print synthetic market prices based on transaction prices. With –inverted-costs, also print inverse prices based on transaction prices. Prices (and postings providing prices) can be filtered by a query.


Show transactions from the journal. Aliases: p, txns.

-m STR --match=STR

show the transaction whose description is most similar to STR, and is most recent


show only newer-dated transactions added in each file since last run

-x     --explicit

show all amounts explicitly

-O FMT --output-format=FMT

select the output format. Supported formats: txt, csv.

-o FILE --output-file=FILE

write output to FILE. A file extension matching one of the above formats selects that format.

$ hledger print
2008/01/01 income
    assets:bank:checking            $1
    income:salary                  $-1

2008/06/01 gift
    assets:bank:checking            $1
    income:gifts                   $-1

2008/06/02 save
    assets:bank:saving              $1
    assets:bank:checking           $-1

2008/06/03 * eat & shop
    expenses:food                $1
    expenses:supplies            $1
    assets:cash                 $-2

2008/12/31 * pay off
    liabilities:debts               $1
    assets:bank:checking           $-1

The print command displays full journal entries (transactions) from the journal file in date order, tidily formatted. print's output is always a valid hledger journal. It preserves all transaction information, but it does not preserve directives or inter-transaction comments

Normally, the journal entry's explicit or implicit amount style is preserved. Ie when an amount is omitted in the journal, it will be omitted in the output. You can use the -x/--explicit flag to make all amounts explicit, which can be useful for troubleshooting or for making your journal more readable and robust against data entry errors. Note, -x will cause postings with a multi-commodity amount (these can arise when a multi-commodity transaction has an implicit amount) will be split into multiple single-commodity postings, for valid journal output.

With -B/--cost, amounts with transaction prices are converted to cost using that price. This can be used for troubleshooting.

With -m/--match and a STR argument, print will show at most one transaction: the one one whose description is most similar to STR, and is most recent. STR should contain at least two characters. If there is no similar-enough match, no transaction will be shown.

With --new, for each FILE being read, hledger reads (and writes) a special state file (.latest.FILE in the same directory), containing the latest transaction date(s) that were seen last time FILE was read. When this file is found, only transactions with newer dates (and new transactions on the latest date) are printed. This is useful for ignoring already-seen entries in import data, such as downloaded CSV files. Eg:

$ hledger -f bank1.csv print --new
# shows transactions added since last print --new on this file

This assumes that transactions added to FILE always have same or increasing dates, and that transactions on the same day do not get reordered. See also the import command.

This command also supports output destination and output format selection. Here's an example of print's CSV output:

$ hledger print -Ocsv
"4","2008/06/03","","*","","eat & shop","","expenses:food","1","$","","1","",""
"4","2008/06/03","","*","","eat & shop","","expenses:supplies","1","$","","1","",""
"4","2008/06/03","","*","","eat & shop","","assets:cash","-2","$","2","","",""
"5","2008/12/31","","*","","pay off","","liabilities:debts","1","$","","1","",""
"5","2008/12/31","","*","","pay off","","assets:bank:checking","-1","$","1","","",""
  • There is one CSV record per posting, with the parent transaction's fields repeated.
  • The “txnidx” (transaction index) field shows which postings belong to the same transaction. (This number might change if transactions are reordered within the file, files are parsed/included in a different order, etc.)
  • The amount is separated into “commodity” (the symbol) and “amount” (numeric quantity) fields.
  • The numeric amount is repeated in either the “credit” or “debit” column, for convenience. (Those names are not accurate in the accounting sense; it just puts negative amounts under credit and zero or greater amounts under debit.)


Print transactions which do not reuse an already-seen description.


Show postings and their running total. Aliases: r, reg.


show running total from report start date (default)

-H --historical

show historical running total/balance (includes postings before report start date)

-A --average

show running average of posting amounts instead of total (implies –empty)

-r --related

show postings' siblings instead

-w N --width=N

set output width (default: terminal width or COLUMNS. -wN,M sets description width as well)

-O FMT --output-format=FMT

select the output format. Supported formats: txt, csv.

-o FILE --output-file=FILE

write output to FILE. A file extension matching one of the above formats selects that format.

The register command displays postings, one per line, and their running total. This is typically used with a query selecting a particular account, to see that account's activity:

$ hledger register checking
2008/01/01 income               assets:bank:checking            $1            $1
2008/06/01 gift                 assets:bank:checking            $1            $2
2008/06/02 save                 assets:bank:checking           $-1            $1
2008/12/31 pay off              assets:bank:checking           $-1             0

The --historical/-H flag adds the balance from any undisplayed prior postings to the running total. This is useful when you want to see only recent activity, with a historically accurate running balance:

$ hledger register checking -b 2008/6 --historical
2008/06/01 gift                 assets:bank:checking            $1            $2
2008/06/02 save                 assets:bank:checking           $-1            $1
2008/12/31 pay off              assets:bank:checking           $-1             0

The --depth option limits the amount of sub-account detail displayed.

The --average/-A flag shows the running average posting amount instead of the running total (so, the final number displayed is the average for the whole report period). This flag implies --empty (see below). It is affected by --historical. It works best when showing just one account and one commodity.

The --related/-r flag shows the other postings in the transactions of the postings which would normally be shown.

With a reporting interval, register shows summary postings, one per interval, aggregating the postings to each account:

$ hledger register --monthly income
2008/01                 income:salary                          $-1           $-1
2008/06                 income:gifts                           $-1           $-2

Periods with no activity, and summary postings with a zero amount, are not shown by default; use the --empty/-E flag to see them:

$ hledger register --monthly income -E
2008/01                 income:salary                          $-1           $-1
2008/02                                                          0           $-1
2008/03                                                          0           $-1
2008/04                                                          0           $-1
2008/05                                                          0           $-1
2008/06                 income:gifts                           $-1           $-2
2008/07                                                          0           $-2
2008/08                                                          0           $-2
2008/09                                                          0           $-2
2008/10                                                          0           $-2
2008/11                                                          0           $-2
2008/12                                                          0           $-2

Often, you'll want to see just one line per interval. The --depth option helps with this, causing subaccounts to be aggregated:

$ hledger register --monthly assets --depth 1h
2008/01                 assets                                  $1            $1
2008/06                 assets                                 $-1             0
2008/12                 assets                                 $-1           $-1

Note when using report intervals, if you specify start/end dates these will be adjusted outward if necessary to contain a whole number of intervals. This ensures that the first and last intervals are full length and comparable to the others in the report.

Custom register output

register uses the full terminal width by default, except on windows. You can override this by setting the COLUMNS environment variable (not a bash shell variable) or by using the --width/-w option.

The description and account columns normally share the space equally (about half of (width - 40) each). You can adjust this by adding a description width as part of –width's argument, comma-separated: --width W,D . Here's a diagram:

<--------------------------------- width (W) ---------------------------------->
date (10)  description (D)       account (W-41-D)     amount (12)   balance (12)
DDDDDDDDDD dddddddddddddddddddd  aaaaaaaaaaaaaaaaaaa  AAAAAAAAAAAA  AAAAAAAAAAAA

and some examples:

$ hledger reg                     # use terminal width (or 80 on windows)
$ hledger reg -w 100              # use width 100
$ COLUMNS=100 hledger reg         # set with one-time environment variable
$ export COLUMNS=100; hledger reg # set till session end (or window resize)
$ hledger reg -w 100,40           # set overall width 100, description width 40
$ hledger reg -w $COLUMNS,40      # use terminal width, and set description width

This command also supports output destination and output format selection.


Print the one posting whose transaction description is closest to DESC, in the style of the register command. Helps ledger-autosync detect already-seen transactions when importing.


Print all transactions, adding custom postings to the matched ones.


Shows time-weighted (TWR) and money-weighted (IRR) rate of return on your investments. See roi --help for more.


Show some journal statistics.

-o FILE --output-file=FILE

write output to FILE. A file extension matching one of the above formats selects that format.

$ hledger stats
Main journal file        : /src/hledger/examples/sample.journal
Included journal files   : 
Transactions span        : 2008-01-01 to 2009-01-01 (366 days)
Last transaction         : 2008-12-31 (2333 days ago)
Transactions             : 5 (0.0 per day)
Transactions last 30 days: 0 (0.0 per day)
Transactions last 7 days : 0 (0.0 per day)
Payees/descriptions      : 5
Accounts                 : 8 (depth 3)
Commodities              : 1 ($)

The stats command displays summary information for the whole journal, or a matched part of it. With a reporting interval, it shows a report for each report period.

This command also supports output destination and output format selection.


List all the tag names used in the journal. With a TAGREGEX argument, only tag names matching the regular expression (case insensitive) are shown. With additional QUERY arguments, only transactions matching the query are considered.


Run built-in unit tests.

Prints test names and their results on stdout. If any test fails or gives an error, the exit code will be non-zero.

Test names include a group prefix. If a (exact, case sensitive) group prefix, or a full test name is provided as the first argument, only that group or test is run.

If a numeric second argument is provided, it will set the randomness seed, for repeatable results from tests using randomness (currently none of them).

This is mainly used by developers, but it's nice to be able to sanity-check your installed hledger executable at any time. All tests are expected to pass - if you ever see otherwise, something has gone wrong, please report a bug!

Add-on Commands

hledger also searches for external add-on commands, and will include these in the commands list. These are programs or scripts in your PATH whose name starts with hledger- and ends with a recognised file extension (currently: no extension, bat,com,exe, hs,lhs,pl,py,rb,rkt,sh).

Add-ons can be invoked like any hledger command, but there are a few things to be aware of. Eg if the hledger-web add-on is installed,

Add-ons are a relatively easy way to add local features or experiment with new ideas. They can be written in any language, but haskell scripts have a big advantage: they can use the same hledger (and haskell) library functions that built-in commands do, for command-line options, journal parsing, reporting, etc.

Here are some hledger add-ons available:

Official add-ons

These are maintained and released along with hledger.


hledger-api serves hledger data as a JSON web API.


hledger-ui provides an efficient curses-style interface.


hledger-web provides a simple web interface.

Third party add-ons

These are maintained separately, and usually updated shortly after a hledger release.


hledger-diff shows differences in an account's transactions between one journal file and another.


hledger-iadd is a curses-style, more interactive replacement for the add command.


hledger-interest generates interest transactions for an account according to various schemes.


hledger-irr calculates the internal rate of return of an investment account, but it's superseded now by the built-in roi command.

Experimental add-ons

These are available in source form in the hledger repo's bin/ directory; installing them is pretty easy. They may be less mature and documented than built-in commands. Reading and tweaking these is a good way to start making your own!


hledger-autosync is a symbolic link for easily running ledger-autosync, if installed. ledger-autosync does deduplicating conversion of OFX data and some CSV formats, and can also download the data if your bank offers OFX Direct Connect.


hledger-chart.hs is an old pie chart generator, in need of some love.


hledger-check.hs checks more powerful account balance assertions.


COLUMNS The screen width used by the register command. Default: the full terminal width.

LEDGER_FILE The journal file path when not specified with -f. Default: ~/.hledger.journal (on windows, perhaps C:/Users/USER/.hledger.journal).


Reads data from one or more files in hledger journal, timeclock, timedot, or CSV format specified with -f, or $LEDGER_FILE, or $HOME/.hledger.journal (on windows, perhaps C:/Users/USER/.hledger.journal).


The need to precede addon command options with -- when invoked from hledger is awkward.

When input data contains non-ascii characters, a suitable system locale must be configured (or there will be an unhelpful error). Eg on POSIX, set LANG to something other than C.

In a Microsoft Windows CMD window, non-ascii characters and colours are not supported.

In a Cygwin/MSYS/Mintty window, the tab key is not supported in hledger add.

Not all of Ledger's journal file syntax is supported. See file format differences.

On large data files, hledger is slower and uses more memory than Ledger.


Here are some issues you might encounter when you run hledger (and remember you can also seek help from the IRC channel, mail list or bug tracker):

Successfully installed, but “No command `hledger' found”

stack and cabal install binaries into a special directory, which should be added to your PATH environment variable. Eg on unix-like systems, that is ~/.local/bin and ~/.cabal/bin respectively.

I set a custom LEDGER_FILE, but hledger is still using the default file

LEDGER_FILE should be a real environment variable, not just a shell variable. The command env | grep LEDGER_FILE should show it. You may need to use export. Here's an explanation.

“Illegal byte sequence” or “Invalid or incomplete multibyte or wide character” errors

In order to handle non-ascii letters and symbols (like £), hledger needs an appropriate locale. This is usually configured system-wide; you can also configure it temporarily. The locale may need to be one that supports UTF-8, if you built hledger with GHC < 7.2 (or possibly always, I'm not sure yet).

Here's an example of setting the locale temporarily, on ubuntu gnu/linux:

$ file my.journal
my.journal: UTF-8 Unicode text                 # <- the file is UTF8-encoded
$ locale -a
en_US.utf8                             # <- a UTF8-aware locale is available
$ LANG=en_US.utf8 hledger -f my.journal print   # <- use it for this command

Here's one way to set it permanently, there are probably better ways:

$ echo "export LANG=en_US.UTF-8" >>~/.bash_profile
$ bash --login

If we preferred to use eg fr_FR.utf8, we might have to install that first:

$ apt-get install language-pack-fr
$ locale -a
$ LANG=fr_FR.utf8 hledger -f my.journal print

Note some platforms allow variant locale spellings, but not all (ubuntu accepts fr_FR.UTF8, mac osx requires exactly fr_FR.UTF-8).

Reporting Bugs

Report bugs at http://bugs.hledger.org (or on the #hledger IRC channel or hledger mail list)


Simon Michael <simon@joyful.com> and contributors

See Also

hledger(1), hledger-ui(1), hledger-web(1), hledger-api(1), hledger_csv(5), hledger_journal(5), hledger_timeclock(5), hledger_timedot(5), ledger(1)


Referenced By


December 2018 hledger 1.12 hledger User Manuals