cat log | calamaris [ calamaris_options ]
Calamaris is used to produce statistical output from Squid, NetCache, Inktomi Traffic Server, Oops! proxy server, Compaq Tasksmart, Cisco Content Engines or related Proxy log files. The resulting output can be ascii or html. It is possible to cache calculated data in a file to use them in later runs.
This manual page describes the options of Calamaris and gives a few examples.
all: extracts all reports available, -a equals -D 10 -d 20 -P 60 -r 20 -s -t 20.
- -d n
domain report: switches the top level and the second level report on. The data is derived from the URL. The output is limited by n. (-1 is unlimited)
- -p type
peak report: Measures the peaks of the Proxy usage in requests per second, per minute and per hour. It reports peaks for TCP, UDP and ALL requests. If set to 'old' these values were calculated with the old slow method, if set to 'new' the new faster (but still slow) method is used.
- -P n
performance report: Shows the throughput of TCP requests for every n minutes.
- -r n
requester report: Switches the UDP and TCP requester reports on. The output is limited by n. (-1 is unlimited)
- -R n
Requested report: adds to each line of the requester report the requested URLs. The output is limited by n. (-1 is unlimited, and can result in very very long reports.)
Warning: Using this option breaks the privacy of your users! (see PRIVACY-Section below)
status report: alters the default behaviour of Calamaris and makes the status reports more verbose.
- -t n
type report: switches the content type and the file extension report on. The output is limited by n. (-1 is unlimited)
- -D n
Distribution Histogram: shows size-based distribution of requested objects, smaller numbers result in more verbose reports. (choose 2, 10 or 100 for useful output.)
Allocation report: shows how different sized objects perform on your Proxy.
- -f type
format: sets the type of input logfiles. If set to
'auto' Calamaris tries to guess the input file format. This is the Default.
Note: If the first line of your input file is corrupted, Calamaris will stop with an error.
'squid' Calamaris expects native logfile derived from Squid V1.1.beta26-V2.x or OOPS.
'squid-extended' Calamaris expects native logfile derived from Squid V1.1.alpha1-V2.x with log_mime_hdrs enabled or Squid with Smartfilter-Patch. or squid-style logfiles out of Cisco Content Engines. (This only enables parsing of these kind of logfile, the additional data will be ignored.)
(Logging of MIME-Headers breaks the privacy of your users! (see PRIVACY-Section below)
'squid-old' Calamaris expects native logfile derived from Squid V1.1.alpha1-V1.1.beta25.
'nc' Calamaris expects Logfiles from NetCache up to V4.x. (Please see the README on this.)
'its' Calamaris expects Logfiles from Inktomi Traffic Server.
'elff' Calamaris expects Logfiles in Extended Logfile Format (i.e. from Compaq Tasksmart, Novell Internet Caching System or NetCache V5.x )
'nse' Calamaris expects Logfiles in Netscape Extended-1 or Netscape Extended-2 Logfile Format (from Netscape/ipoint Proxy-Server )
Standard output format is plain ascii with 80 chars width.
- -F type[,type[,type[,...]]]
Format: sets the format of the output-report. If set to
'mail' adds a subject header to the beginning of the report.
'html' all output is given in html with tables. Can be combined with 'mail' to send html mails.
'html-embed' all output is given in html with tables without HTML-Headers. Useful for Server-Side-Includes.
'unformatted' gives out the raw numbers seperated by spaces. Useful for re-using the output in other scripts. If you use this along with -U, the byte values are calculated in the given Unit, and displayed without indication along with the numbers. the indication moves up to the header of the report.
- -M string
Meta: adds a custom string into the <HEAD> of a HTML-Report. Useful if you want to add Stylesheets or something to the Report.
Note: -M works only in combination with -F html.
- -l string
logo: add a custom string to a HTML-Report. It'll be added to a table on the top of the output. -l '<A HREF="http://cord.de/"><IMG BORDER=0 SRC="http://cord.de/Images/cord/cordlog2n.gif" ALT="Cord"></A>' will add my logo with a link to the Report.
Note: -l works only in combination with -F html.
- -U string
Unit: You can define this to K(ilo), M(ega), G(iga) or T(era) for the Byte-units.
- -S n[,n[,n[,...]]]
Show: Shows only the defined reports in the specified order. Default is to display the reports as they are defined through the report-switches above. The following numbers are defined:
1 Incoming request peak per protocol
2 Incoming transfer volume per protocol
3 Incoming requests by method
4 Incoming UDP-requests by status
5 Incoming TCP-requests by status
6 Outgoing requests by status
7 Outgoing requests by destination
8 Request-destinations by 2ndlevel-domain
9 Request-destinations by toplevel-domain
11 Requested content-type
12 Requested extensions
13 Incoming UDP-requests by host
14 Incoming TCP-requests by host
15 Distribution Histogram
16 Performance in minute steps
Note: Using this doesn't make Calamaris any faster, the internal calculations will be done as the report-switches were set (see above).
- -i file
input file: You can reuse a cache file generated with -o file to add old data to a new report. Several files can be seperated with a ':'.
Note: if you use more than one cache file, make sure they are chronologicaly ordered (oldest first).
Note: if you reuse cache-files, which were not created with -d -1 -r -1 -t -1 -R -1 the number of 'others' is likely wrong everywhere.
- -o file
output file: Calamaris stores a summary of the computed information in file and you can reuse it at a later time with -i.
Note: The output file can be the same as the input file: it is simply overwritten after reading the data. It is not recommended to change the options between different runs if you include older data as this can result in strange measurements.
- -H name
Host name: The name for the title or subject of the output. If set to 'lookup' Calamaris looks up the host name of the system its been run on.
no lookup: Switches the IP lookup for the requesters off.
Order: Changes the sort order in the reports to request size, default is sorting by number of requests.
- -I t-t
Interval: defines which time-interval should be parsed. t has to be the format yyyymmddhhmmss
Note: omitting the beginning or ending date is allowed.
N-level: All URL-Host reports will be switched from 2nd-level to N-level-reports. (-1 shows a full urlhost-report)
Note: This option is only useful with activated domain-report.
- -T n
Time: Adjust the Performancereport in minutes for non GMT-Timezoners.
case: Switch to case-insensitive. This is useful for the 'Requested extensions' report.
user: Switches the usage of eventually available ident information for requester reports on.
Warning: This breaks the privacy of your users! (see PRIVACY-Section below)
zero: Switches reading from standard input off. You can use this to merge many cache files to one (see -i and -o) or to generate a report out of cache files.
- -b n
benchmark: A switch for the impatient as it prints a '#' for every n parsed lines.
verbose: print more information about what is Calamaris is doing and believing.
Loop: prints the internal loop to STDERR. (for Debugging)
Copyright: Prints the copyright information of Calamaris.
help: Prints a brief description of the command line options.
Version: Prints out the Version-Number.
- This example mails the daily statistics to root:
cat /var/log/squid/access.log | nice -39 calamaris -aH 'daily worf' -F mail | mail root
- This one only caches a summary for later use:
cat /var/log/squid/access.log | calamaris -a -o daily.`date +"%w"` > /dev/null
- You can then use the caches to have weekly statistics:
if [ $DAYOFWEEK = "0" ]; then calamaris -a -i daily.1:daily.2:daily.3:daily.4:daily.5:daily.6:daily.0 -z -F mail -H "weekly worf" | mail root ; fi
If you have a problem with Calamaris, please make sure that you use the recent version of Calamaris (see Version below). Also check that your proxy works correctly and doesn't produce invalid Logfiles. (see the README for buglist and pointers.)
If you're sure that you've encountered a bug in Calamaris, please report it to Calamarisfirstname.lastname@example.org. This also applies if Calamaris itself says 'please report this'.
Calamaris can be (mis-)used to track what users are requesting.
So please read the following and think about it, before using Calamaris to be the Big Brother.
- If you don't trust your users than there is something more wrong than the loss of productivity.
- Squid has some nice acl-mechanisms. If you think that your users don't use the net properly, don't let them use it. (You can also open the net at specific times or to specific sites, if you want.)
- If you still want to use Calamaris that way, let your vict^Wusers know, that they'll be monitored. (in Germany you have to let them know!)
Cord Beermann <Cord@Wunder-Nett.org>. There are also a lot of people who contributed code, gave ideas or requested features. Look them up in the executable.
This man page was written by Philipp Frauenfelder <email@example.com>, maintainer of the Debian package. Maintenance is now taken over by Cord Beermann.
Version of this manpage: $Id: calamaris.1,v 1.28 2003/05/14 21:22:37 cord Exp $
It describes the usage of Calamaris V2.58 and later.
Information about new releases, mailing lists, and other related issues can be found from the Calamaris home page at http://Calamaris.Cord.de/
Calamaris comes with "absolutely no warranty".
Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003 Cord Beermann
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
(If you modify and want to publish it under the name Calamaris, please ask me. I don't want to confuse the 'audience' with many different versions of the same name and/or Version number. (This is not part of the license, it is only a favour i asked of you.))
This program is distributed in the hope that it will be useful, but WITHOUT ANY Warranty; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.