rte_mempool.h - Man Page

struct rte_mempool_cache
struct rte_mempool_objsz
struct rte_mempool_objhdr
struct rte_mempool_memhdr
struct rte_mempool_info
struct rte_mempool
struct rte_mempool_ops
struct rte_mempool_ops_table

#define RTE_MEMPOOL_HEADER_COOKIE1   0xbadbadbadadd2e55ULL
#define RTE_MEMPOOL_HEADER_COOKIE2   0xf2eef2eedadd2e55ULL
#define RTE_MEMPOOL_TRAILER_COOKIE   0xadd2e55badbadbadULL
#define RTE_MEMPOOL_ALIGN   RTE_CACHE_LINE_SIZE
#define RTE_MEMPOOL_F_NO_SPREAD   0x0001
#define MEMPOOL_F_NO_SPREAD   RTE_MEMPOOL_F_NO_SPREAD
#define RTE_MEMPOOL_F_NO_CACHE_ALIGN   0x0002
#define MEMPOOL_F_NO_CACHE_ALIGN   RTE_MEMPOOL_F_NO_CACHE_ALIGN
#define RTE_MEMPOOL_F_SP_PUT   0x0004
#define MEMPOOL_F_SP_PUT   RTE_MEMPOOL_F_SP_PUT
#define RTE_MEMPOOL_F_SC_GET   0x0008
#define MEMPOOL_F_SC_GET   RTE_MEMPOOL_F_SC_GET
#define RTE_MEMPOOL_F_POOL_CREATED   0x0010
#define RTE_MEMPOOL_F_NO_IOVA_CONTIG   0x0020
#define MEMPOOL_F_NO_IOVA_CONTIG   RTE_MEMPOOL_F_NO_IOVA_CONTIG
#define RTE_MEMPOOL_F_NON_IO   0x0040
#define RTE_MEMPOOL_VALID_USER_FLAGS
#define RTE_MEMPOOL_OPS_NAMESIZE   32
#define RTE_MEMPOOL_POPULATE_F_ALIGN_OBJ   0x0001
#define RTE_MEMPOOL_MAX_OPS_IDX   16
#define RTE_MEMPOOL_REGISTER_OPS(ops)

typedef void rte_mempool_memchunk_free_cb_t(struct rte_mempool_memhdr *memhdr, void *opaque)
typedef int(* rte_mempool_alloc_t) (struct rte_mempool *mp)
typedef void(* rte_mempool_free_t) (struct rte_mempool *mp)
typedef int(* rte_mempool_enqueue_t) (struct rte_mempool *mp, void *const *obj_table, unsigned int n)
typedef int(* rte_mempool_dequeue_t) (struct rte_mempool *mp, void **obj_table, unsigned int n)
typedef int(* rte_mempool_dequeue_contig_blocks_t) (struct rte_mempool *mp, void **first_obj_table, unsigned int n)
typedef unsigned(* rte_mempool_get_count) (const struct rte_mempool *mp)
typedef ssize_t(* rte_mempool_calc_mem_size_t) (const struct rte_mempool *mp, uint32_t obj_num, uint32_t pg_shift, size_t *min_chunk_size, size_t *align)
typedef void rte_mempool_populate_obj_cb_t(struct rte_mempool *mp, void *opaque, void *vaddr, rte_iova_t iova)
typedef int(* rte_mempool_populate_t) (struct rte_mempool *mp, unsigned int max_objs, void *vaddr, rte_iova_t iova, size_t len, rte_mempool_populate_obj_cb_t *obj_cb, void *obj_cb_arg)
typedef int(* rte_mempool_get_info_t) (const struct rte_mempool *mp, struct rte_mempool_info *info)
typedef void rte_mempool_obj_cb_t(struct rte_mempool *mp, void *opaque, void *obj, unsigned obj_idx)
typedef void rte_mempool_mem_cb_t(struct rte_mempool *mp, void *opaque, struct rte_mempool_memhdr *memhdr, unsigned mem_idx)
typedef void rte_mempool_ctor_t(struct rte_mempool *, void *)

enum rte_mempool_event { RTE_MEMPOOL_EVENT_READY = 0, RTE_MEMPOOL_EVENT_DESTROY = 1 }

RTE_STAILQ_HEAD (rte_mempool_objhdr_list, rte_mempool_objhdr)
RTE_STAILQ_HEAD (rte_mempool_memhdr_list, rte_mempool_memhdr)
static struct rte_mempool * rte_mempool_from_obj (void *obj)
ssize_t rte_mempool_op_calc_mem_size_default (const struct rte_mempool *mp, uint32_t obj_num, uint32_t pg_shift, size_t *min_chunk_size, size_t *align)
int rte_mempool_op_populate_default (struct rte_mempool *mp, unsigned int max_objs, void *vaddr, rte_iova_t iova, size_t len, rte_mempool_populate_obj_cb_t *obj_cb, void *obj_cb_arg)
int rte_mempool_ops_get_info (const struct rte_mempool *mp, struct rte_mempool_info *info)
int rte_mempool_set_ops_byname (struct rte_mempool *mp, const char *name, void *pool_config)
int rte_mempool_register_ops (const struct rte_mempool_ops *ops)
struct rte_mempool * rte_mempool_create (const char *name, unsigned n, unsigned elt_size, unsigned cache_size, unsigned private_data_size, rte_mempool_ctor_t *mp_init, void *mp_init_arg, rte_mempool_obj_cb_t *obj_init, void *obj_init_arg, int socket_id, unsigned flags)
struct rte_mempool * rte_mempool_create_empty (const char *name, unsigned n, unsigned elt_size, unsigned cache_size, unsigned private_data_size, int socket_id, unsigned flags)
void rte_mempool_free (struct rte_mempool *mp)
int rte_mempool_populate_iova (struct rte_mempool *mp, char *vaddr, rte_iova_t iova, size_t len, rte_mempool_memchunk_free_cb_t *free_cb, void *opaque)
int rte_mempool_populate_virt (struct rte_mempool *mp, char *addr, size_t len, size_t pg_sz, rte_mempool_memchunk_free_cb_t *free_cb, void *opaque)
int rte_mempool_populate_default (struct rte_mempool *mp)
int rte_mempool_populate_anon (struct rte_mempool *mp)
uint32_t rte_mempool_obj_iter (struct rte_mempool *mp, rte_mempool_obj_cb_t *obj_cb, void *obj_cb_arg)
uint32_t rte_mempool_mem_iter (struct rte_mempool *mp, rte_mempool_mem_cb_t *mem_cb, void *mem_cb_arg)
void rte_mempool_dump (FILE *f, struct rte_mempool *mp)
struct rte_mempool_cache * rte_mempool_cache_create (uint32_t size, int socket_id)
void rte_mempool_cache_free (struct rte_mempool_cache *cache)
static __rte_always_inline struct rte_mempool_cache * rte_mempool_default_cache (struct rte_mempool *mp, unsigned lcore_id)
static __rte_always_inline void rte_mempool_cache_flush (struct rte_mempool_cache *cache, struct rte_mempool *mp)
static __rte_always_inline void rte_mempool_generic_put (struct rte_mempool *mp, void *const *obj_table, unsigned int n, struct rte_mempool_cache *cache)
static __rte_always_inline void rte_mempool_put_bulk (struct rte_mempool *mp, void *const *obj_table, unsigned int n)
static __rte_always_inline void rte_mempool_put (struct rte_mempool *mp, void *obj)
static __rte_always_inline int rte_mempool_generic_get (struct rte_mempool *mp, void **obj_table, unsigned int n, struct rte_mempool_cache *cache)
static __rte_always_inline int rte_mempool_get_bulk (struct rte_mempool *mp, void **obj_table, unsigned int n)
static __rte_always_inline int rte_mempool_get (struct rte_mempool *mp, void **obj_p)
static __rte_always_inline int rte_mempool_get_contig_blocks (struct rte_mempool *mp, void **first_obj_table, unsigned int n)
unsigned int rte_mempool_avail_count (const struct rte_mempool *mp)
unsigned int rte_mempool_in_use_count (const struct rte_mempool *mp)
static int rte_mempool_full (const struct rte_mempool *mp)
static int rte_mempool_empty (const struct rte_mempool *mp)
static rte_iova_t rte_mempool_virt2iova (const void *elt)
void rte_mempool_audit (struct rte_mempool *mp)
static void * rte_mempool_get_priv (struct rte_mempool *mp)
void rte_mempool_list_dump (FILE *f)
struct rte_mempool * rte_mempool_lookup (const char *name)
uint32_t rte_mempool_calc_obj_size (uint32_t elt_size, uint32_t flags, struct rte_mempool_objsz *sz)
void rte_mempool_walk (void(*func)(struct rte_mempool *, void *arg), void *arg)

struct rte_mempool_ops_table rte_mempool_ops_table

Header cookie.

Definition at line 57 of file rte_mempool.h.

Header cookie.

Definition at line 58 of file rte_mempool.h.

Trailer cookie.

Definition at line 59 of file rte_mempool.h.

Alignment of elements inside mempool.

Definition at line 137 of file rte_mempool.h.

Spreading among memory channels not required.

Definition at line 265 of file rte_mempool.h.

Backward compatibility synonym for RTE_MEMPOOL_F_NO_SPREAD. To be deprecated.

Definition at line 270 of file rte_mempool.h.

Do not align objects on cache lines.

Definition at line 272 of file rte_mempool.h.

Backward compatibility synonym for RTE_MEMPOOL_F_NO_CACHE_ALIGN. To be deprecated.

Definition at line 277 of file rte_mempool.h.

Default put is 'single-producer'.

Definition at line 279 of file rte_mempool.h.

Backward compatibility synonym for RTE_MEMPOOL_F_SP_PUT. To be deprecated.

Definition at line 284 of file rte_mempool.h.

Default get is 'single-consumer'.

Definition at line 286 of file rte_mempool.h.

Backward compatibility synonym for RTE_MEMPOOL_F_SC_GET. To be deprecated.

Definition at line 291 of file rte_mempool.h.

Internal: pool is created.

Definition at line 293 of file rte_mempool.h.

Don't need IOVA contiguous objects.

Definition at line 295 of file rte_mempool.h.

Backward compatibility synonym for RTE_MEMPOOL_F_NO_IOVA_CONTIG. To be deprecated.

Definition at line 300 of file rte_mempool.h.

Internal: no object from the pool can be used for device IO (DMA).

Definition at line 302 of file rte_mempool.h.

Value:.PP

    (RTE_MEMPOOL_F_NO_SPREAD \
    | RTE_MEMPOOL_F_NO_CACHE_ALIGN \
    | RTE_MEMPOOL_F_SP_PUT \
    | RTE_MEMPOOL_F_SC_GET \
    | RTE_MEMPOOL_F_NO_IOVA_CONTIG \
    )

This macro lists all the mempool flags an application may request.

Definition at line 307 of file rte_mempool.h.

Max length of ops struct name.

Definition at line 448 of file rte_mempool.h.

Align objects on addresses multiple of total_elt_sz.

Definition at line 624 of file rte_mempool.h.

Max registered ops structs

Definition at line 709 of file rte_mempool.h.

Value:.PP

    RTE_INIT(mp_hdlr_init_##ops)                \
    {                           \
        rte_mempool_register_ops(&ops);         \
    }

Macro to statically register the ops of a mempool handler. Note that the rte_mempool_register_ops fails silently here when more than RTE_MEMPOOL_MAX_OPS_IDX is registered.

Definition at line 973 of file rte_mempool.h.

Callback used to free a memory chunk

Definition at line 187 of file rte_mempool.h.

Prototype for implementation specific data provisioning function.

The function should provide the implementation specific memory for use by the other mempool ops functions in a given mempool ops struct. E.g. the default ops provides an instance of the rte_ring for this purpose. it will most likely point to a different type of data structure, and will be transparent to the application programmer. This function should set mp->pool_data.

Definition at line 460 of file rte_mempool.h.

Free the opaque private data pointed to by mp->pool_data pointer.

Definition at line 465 of file rte_mempool.h.

Enqueue 'n' objects into the external pool.

Returns

• 0: Success
• <0: Error

Definition at line 473 of file rte_mempool.h.

Dequeue 'n' objects from the external pool.

Returns

• 0: Success
• <0: Error

Definition at line 482 of file rte_mempool.h.

Dequeue a number of contiguous object blocks from the external pool.

Definition at line 488 of file rte_mempool.h.

Return the number of available objects in the external pool.

Definition at line 494 of file rte_mempool.h.

Calculate memory size required to store given number of objects.

If mempool objects are not required to be IOVA-contiguous (the flag RTE_MEMPOOL_F_NO_IOVA_CONTIG is set), min_chunk_size defines virtually contiguous chunk size. Otherwise, if mempool objects must be IOVA-contiguous (the flag RTE_MEMPOOL_F_NO_IOVA_CONTIG is clear), min_chunk_size defines IOVA-contiguous chunk size.

Parameters

mp Pointer to the memory pool.
obj_num Number of objects.
pg_shift LOG2 of the physical pages size. If set to 0, ignore page boundaries.
min_chunk_size Location for minimum size of the memory chunk which may be used to store memory pool objects.
align Location for required memory chunk alignment.

Returns

Required memory size.

Definition at line 519 of file rte_mempool.h.

Function to be called for each populated object.

Parameters

mp A pointer to the mempool structure.
opaque An opaque pointer passed to iterator.
vaddr Object virtual address.
iova Input/output virtual address of the object or RTE_BAD_IOVA.

Definition at line 585 of file rte_mempool.h.

Populate memory pool objects using provided memory chunk.

Populated objects should be enqueued to the pool, e.g. using rte_mempool_ops_enqueue_bulk().

If the given IO address is unknown (iova = RTE_BAD_IOVA), the chunk doesn't need to be physically contiguous (only virtually), and allocated objects may span two pages.

Parameters

mp A pointer to the mempool structure.
max_objs Maximum number of objects to be populated.
vaddr The virtual address of memory that should be used to store objects.
iova The IO address
len The length of memory in bytes.
obj_cb Callback function to be executed for each populated object.
obj_cb_arg An opaque pointer passed to the callback function.

Returns

The number of objects added on success. On error, no objects are populated and a negative errno is returned.

Definition at line 616 of file rte_mempool.h.

Get some additional information about a mempool.

Definition at line 677 of file rte_mempool.h.

An object callback function for mempool.

Used by rte_mempool_create() and rte_mempool_obj_iter().

Definition at line 984 of file rte_mempool.h.

A memory callback function for mempool.

Used by rte_mempool_mem_iter().

Definition at line 993 of file rte_mempool.h.

A mempool constructor callback function.

Arguments are the mempool and the opaque pointer given by the user in rte_mempool_create().

Definition at line 1003 of file rte_mempool.h.

Mempool event type.

Enumerator

RTE_MEMPOOL_EVENT_READY

Occurs after a mempool is fully populated.

RTE_MEMPOOL_EVENT_DESTROY

Occurs before the destruction of a mempool begins.

Definition at line 1921 of file rte_mempool.h.

A list of object headers type

A list of memory where objects are stored

Return a pointer to the mempool owning this object.

Parameters

obj An object that is owned by a pool. If this is not the case, the behavior is undefined.

Returns

A pointer to the mempool structure.

Definition at line 382 of file rte_mempool.h.

Default way to calculate memory size required to store given number of objects.

Equivalent to rte_mempool_op_calc_mem_size_helper(mp, obj_num, pg_shift, 0, min_chunk_size, align).

Default way to populate memory pool object using provided memory chunk.

Equivalent to rte_mempool_op_populate_helper(mp, 0, max_objs, vaddr, iova, len, obj_cb, obj_cb_arg).

Wrapper for mempool_ops get_info callback.

Parameters

mp Pointer to the memory pool.
info Pointer to the rte_mempool_info structure

Returns

• 0: Success; The mempool driver supports retrieving supplementary mempool information
• -ENOTSUP - doesn't support get_info ops (valid case).

Set the ops of a mempool.

This can only be done on a mempool that is not populated, i.e. just after a call to rte_mempool_create_empty().

Parameters

mp Pointer to the memory pool.
name Name of the ops structure to use for this mempool.
pool_config Opaque data that can be passed by the application to the ops functions.

Returns

• 0: Success; the mempool is now using the requested ops functions.
• -EINVAL - Invalid ops struct name provided.
• -EEXIST - mempool already has an ops struct assigned.

Register mempool operations.

Parameters

ops Pointer to an ops structure to register.

Returns

• >=0: Success; return the index of the ops struct in the table.
• -EINVAL - some missing callbacks while registering ops struct.
• -ENOSPC - the maximum number of ops structs has been reached.

Create a new mempool named name in memory.

This function uses rte_memzone_reserve() to allocate memory. The pool contains n elements of elt_size. Its size is set to n.

Parameters

name The name of the mempool.
n The number of elements in the mempool. The optimum size (in terms of memory usage) for a mempool is when n is a power of two minus one: n = (2^q - 1).
elt_size The size of each element.
cache_size If cache_size is non-zero, the rte_mempool library will try to limit the accesses to the common lockless pool, by maintaining a per-lcore object cache. This argument must be lower or equal to RTE_MEMPOOL_CACHE_MAX_SIZE and n / 1.5. It is advised to choose cache_size to have 'n modulo cache_size == 0': if this is not the case, some elements will always stay in the pool and will never be used. The access to the per-lcore table is of course faster than the multi-producer/consumer pool. The cache can be disabled if the cache_size argument is set to 0; it can be useful to avoid losing objects in cache.
private_data_size The size of the private data appended after the mempool structure. This is useful for storing some private data after the mempool structure, as is done for rte_mbuf_pool for example.
mp_init A function pointer that is called for initialization of the pool, before object initialization. The user can initialize the private data in this function if needed. This parameter can be NULL if not needed.
mp_init_arg An opaque pointer to data that can be used in the mempool constructor function.
obj_init A function pointer that is called for each object at initialization of the pool. The user can set some meta data in objects if needed. This parameter can be NULL if not needed. The obj_init() function takes the mempool pointer, the init_arg, the object pointer and the object number as parameters.
obj_init_arg An opaque pointer to data that can be used as an argument for each call to the object constructor function.
socket_id The socket_id argument is the socket identifier in the case of NUMA. The value can be SOCKET_ID_ANY if there is no NUMA constraint for the reserved zone.
flags The flags arguments is an OR of following flags:

• RTE_MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread between channels in RAM: the pool allocator will add padding between objects depending on the hardware configuration. See Memory alignment constraints for details. If this flag is set, the allocator will just align them to a cache line.
• RTE_MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are cache-aligned. This flag removes this constraint, and no padding will be present between objects. This flag implies RTE_MEMPOOL_F_NO_SPREAD.
• RTE_MEMPOOL_F_SP_PUT: If this flag is set, the default behavior when using rte_mempool_put() or rte_mempool_put_bulk() is 'single-producer'. Otherwise, it is 'multi-producers'.
• RTE_MEMPOOL_F_SC_GET: If this flag is set, the default behavior when using rte_mempool_get() or rte_mempool_get_bulk() is 'single-consumer'. Otherwise, it is 'multi-consumers'.
• RTE_MEMPOOL_F_NO_IOVA_CONTIG: If set, allocated objects won't necessarily be contiguous in IO memory.

Returns

The pointer to the new allocated mempool, on success. NULL on error with rte_errno set appropriately. Possible rte_errno values include:

• E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
• EINVAL - cache size provided is too large or an unknown flag was passed
• ENOSPC - the maximum number of memzones has already been allocated
• EEXIST - a memzone with the same name already exists
• ENOMEM - no appropriate memory area found in which to create memzone

Create an empty mempool

The mempool is allocated and initialized, but it is not populated: no memory is allocated for the mempool elements. The user has to call rte_mempool_populate_*() to add memory chunks to the pool. Once populated, the user may also want to initialize each object with rte_mempool_obj_iter().

Parameters

name The name of the mempool.
n The maximum number of elements that can be added in the mempool. The optimum size (in terms of memory usage) for a mempool is when n is a power of two minus one: n = (2^q - 1).
elt_size The size of each element.
cache_size Size of the cache. See rte_mempool_create() for details.
private_data_size The size of the private data appended after the mempool structure. This is useful for storing some private data after the mempool structure, as is done for rte_mbuf_pool for example.
socket_id The socket_id argument is the socket identifier in the case of NUMA. The value can be SOCKET_ID_ANY if there is no NUMA constraint for the reserved zone.
flags Flags controlling the behavior of the mempool. See rte_mempool_create() for details.

Returns

The pointer to the new allocated mempool, on success. NULL on error with rte_errno set appropriately. See rte_mempool_create() for details.

Free a mempool

Unlink the mempool from global list, free the memory chunks, and all memory referenced by the mempool. The objects must not be used by other cores as they will be freed.

Parameters

mp A pointer to the mempool structure. If NULL then, the function does nothing.

Add physically contiguous memory for objects in the pool at init

Add a virtually and physically contiguous memory chunk in the pool where objects can be instantiated.

If the given IO address is unknown (iova = RTE_BAD_IOVA), the chunk doesn't need to be physically contiguous (only virtually), and allocated objects may span two pages.

Parameters

mp A pointer to the mempool structure.
vaddr The virtual address of memory that should be used to store objects.
iova The IO address
len The length of memory in bytes.
free_cb The callback used to free this chunk when destroying the mempool.
opaque An opaque argument passed to free_cb.

Returns

The number of objects added on success (strictly positive). On error, the chunk is not added in the memory list of the mempool the following code is returned: (0): not enough room in chunk for one object. (-ENOSPC): mempool is already populated. (-ENOMEM): allocation failure.

Add virtually contiguous memory for objects in the pool at init

Add a virtually contiguous memory chunk in the pool where objects can be instantiated.

Parameters

mp A pointer to the mempool structure.
addr The virtual address of memory that should be used to store objects.
len The length of memory in bytes.
pg_sz The size of memory pages in this virtual area.
free_cb The callback used to free this chunk when destroying the mempool.
opaque An opaque argument passed to free_cb.

Returns

The number of objects added on success (strictly positive). On error, the chunk is not added in the memory list of the mempool the following code is returned: (0): not enough room in chunk for one object. (-ENOSPC): mempool is already populated. (-ENOMEM): allocation failure.

Add memory for objects in the pool at init

This is the default function used by rte_mempool_create() to populate the mempool. It adds memory allocated using rte_memzone_reserve().

Parameters

mp A pointer to the mempool structure.

Returns

The number of objects added on success. On error, the chunk is not added in the memory list of the mempool and a negative errno is returned.

Add memory from anonymous mapping for objects in the pool at init

This function mmap an anonymous memory zone that is locked in memory to store the objects of the mempool.

Parameters

mp A pointer to the mempool structure.

Returns

The number of objects added on success. On error, 0 is returned, rte_errno is set, and the chunk is not added in the memory list of the mempool.

Call a function for each mempool element

Iterate across all objects attached to a rte_mempool and call the callback function on it.

Parameters

mp A pointer to an initialized mempool.
obj_cb A function pointer that is called for each object.
obj_cb_arg An opaque pointer passed to the callback function.

Returns

Number of objects iterated.

Call a function for each mempool memory chunk

Iterate across all memory chunks attached to a rte_mempool and call the callback function on it.

Parameters

mp A pointer to an initialized mempool.
mem_cb A function pointer that is called for each memory chunk.
mem_cb_arg An opaque pointer passed to the callback function.

Returns

Number of memory chunks iterated.

Dump the status of the mempool to a file.

Parameters

f A pointer to a file for output
mp A pointer to the mempool structure.

Create a user-owned mempool cache.

This can be used by unregistered non-EAL threads to enable caching when they interact with a mempool.

Parameters

size The size of the mempool cache. See rte_mempool_create()'s cache_size parameter description for more information. The same limits and considerations apply here too.
socket_id The socket identifier in the case of NUMA. The value can be SOCKET_ID_ANY if there is no NUMA constraint for the reserved zone.

Free a user-owned mempool cache.

Parameters

cache A pointer to the mempool cache.

Get a pointer to the per-lcore default mempool cache.

Parameters

mp A pointer to the mempool structure.
lcore_id The logical core id.

Returns

A pointer to the mempool cache or NULL if disabled or unregistered non-EAL thread.

Definition at line 1321 of file rte_mempool.h.

Flush a user-owned mempool cache to the specified mempool.

Parameters

cache A pointer to the mempool cache.
mp A pointer to the mempool.

Definition at line 1343 of file rte_mempool.h.

Put several objects back in the mempool.

Parameters

mp A pointer to the mempool structure.
obj_table A pointer to a table of void * pointers (objects).
n The number of objects to add in the mempool from the obj_table.
cache A pointer to a mempool cache structure. May be NULL if not needed.

Definition at line 1432 of file rte_mempool.h.

Put several objects back in the mempool.

This function calls the multi-producer or the single-producer version depending on the default behavior that was specified at mempool creation time (see flags).

Parameters

mp A pointer to the mempool structure.
obj_table A pointer to a table of void * pointers (objects).
n The number of objects to add in the mempool from obj_table.

Definition at line 1455 of file rte_mempool.h.

Put one object back in the mempool.

This function calls the multi-producer or the single-producer version depending on the default behavior that was specified at mempool creation time (see flags).

Parameters

mp A pointer to the mempool structure.
obj A pointer to the object to be added.

Definition at line 1477 of file rte_mempool.h.

Get several objects from the mempool.

If cache is enabled, objects will be retrieved first from cache, subsequently from the common pool. Note that it can return -ENOENT when the local cache and common pool are empty, even if cache from other lcores are full.

Parameters

mp A pointer to the mempool structure.
obj_table A pointer to a table of void * pointers (objects) that will be filled.
n The number of objects to get from mempool to obj_table.
cache A pointer to a mempool cache structure. May be NULL if not needed.

Returns

• 0: Success; objects taken.
• -ENOENT: Not enough entries in the mempool; no object is retrieved.

Definition at line 1636 of file rte_mempool.h.

Get several objects from the mempool.

This function calls the multi-consumers or the single-consumer version, depending on the default behaviour that was specified at mempool creation time (see flags).

If cache is enabled, objects will be retrieved first from cache, subsequently from the common pool. Note that it can return -ENOENT when the local cache and common pool are empty, even if cache from other lcores are full.

Parameters

mp A pointer to the mempool structure.
obj_table A pointer to a table of void * pointers (objects) that will be filled.
n The number of objects to get from the mempool to obj_table.

Returns

• 0: Success; objects taken
• -ENOENT: Not enough entries in the mempool; no object is retrieved.

Definition at line 1670 of file rte_mempool.h.

Get one object from the mempool.

This function calls the multi-consumers or the single-consumer version, depending on the default behavior that was specified at mempool creation (see flags).

If cache is enabled, objects will be retrieved first from cache, subsequently from the common pool. Note that it can return -ENOENT when the local cache and common pool are empty, even if cache from other lcores are full.

Parameters

mp A pointer to the mempool structure.
obj_p A pointer to a void * pointer (object) that will be filled.

Returns

• 0: Success; objects taken.
• -ENOENT: Not enough entries in the mempool; no object is retrieved.

Definition at line 1699 of file rte_mempool.h.

Get a contiguous blocks of objects from the mempool.

If cache is enabled, consider to flush it first, to reuse objects as soon as possible.

The application should check that the driver supports the operation by calling rte_mempool_ops_get_info() and checking that contig_block_size is not zero.

Parameters

mp A pointer to the mempool structure.
first_obj_table A pointer to a pointer to the first object in each block.
n The number of blocks to get from mempool.

Returns

• 0: Success; blocks taken.
• -ENOBUFS: Not enough entries in the mempool; no object is retrieved.
• -EOPNOTSUPP: The mempool driver does not support block dequeue

Definition at line 1726 of file rte_mempool.h.

Return the number of entries in the mempool.

When cache is enabled, this function has to browse the length of all lcores, so it should not be used in a data path, but only for debug purposes. User-owned mempool caches are not accounted for.

Parameters

mp A pointer to the mempool structure.

Returns

The number of entries in the mempool.

Return the number of elements which have been allocated from the mempool

When cache is enabled, this function has to browse the length of all lcores, so it should not be used in a data path, but only for debug purposes.

Parameters

mp A pointer to the mempool structure.

Returns

The number of free entries in the mempool.

Test if the mempool is full.

When cache is enabled, this function has to browse the length of all lcores, so it should not be used in a data path, but only for debug purposes. User-owned mempool caches are not accounted for.

Parameters

mp A pointer to the mempool structure.

Returns

• 1: The mempool is full.
• 0: The mempool is not full.

Definition at line 1789 of file rte_mempool.h.

Test if the mempool is empty.

When cache is enabled, this function has to browse the length of all lcores, so it should not be used in a data path, but only for debug purposes. User-owned mempool caches are not accounted for.

Parameters

mp A pointer to the mempool structure.

Returns

• 1: The mempool is empty.
• 0: The mempool is not empty.

Definition at line 1808 of file rte_mempool.h.

Return the IO address of elt, which is an element of the pool mp.

Parameters

elt A pointer (virtual address) to the element of the pool.

Returns

The IO address of the elt element. If the mempool was created with RTE_MEMPOOL_F_NO_IOVA_CONTIG, the returned value is RTE_BAD_IOVA.

Definition at line 1824 of file rte_mempool.h.

Check the consistency of mempool objects.

Verify the coherency of fields in the mempool structure. Also check that the cookies of mempool objects (even the ones that are not present in pool) have a correct value. If not, a panic will occur.

Parameters

mp A pointer to the mempool structure.

Return a pointer to the private data in an mempool structure.

Parameters

mp A pointer to the mempool structure.

Returns

A pointer to the private data.

Definition at line 1852 of file rte_mempool.h.

Dump the status of all mempools on the console

Parameters

f A pointer to a file for output

Search a mempool from its name

Parameters

name The name of the mempool.

Returns

The pointer to the mempool matching the name, or NULL if not found. NULL on error with rte_errno set appropriately. Possible rte_errno values include:

• ENOENT - required entry not available to return.

Get the header, trailer and total size of a mempool element.

Given a desired size of the mempool element and mempool flags, calculates header, trailer, body and total sizes of the mempool object.

Parameters

elt_size The size of each element, without header and trailer.
flags The flags used for the mempool creation. Consult rte_mempool_create() for more information about possible values. The size of each element.
sz The calculated detailed size the mempool object. May be NULL.

Returns

Total size of the mempool object.

Walk list of all memory pools

Parameters

func Iterator function
arg Argument passed to iterator

Array of registered ops structs.